DAC8568驅動程序 - 免費下載
技術資料資源
文件大小：169 K
?? 資源詳細信息
?? 溫馨提示：本資源由用戶 lijumiao 上傳分享，僅供學習交流使用。如有侵權，請聯系我們刪除。
資源簡介
This example shows how you can use signal functions in the Vision
debugger to simulate a signal that is coming into one of the analog
inputs of the LPC21xx.
The Measure example is described in detail in the Getting Started
User's Guide.
The MEASURE example program is available for several targets:
Simulator: uVision Simulator for LPC2129
MCB2100: Keil MCB2100 evaluation board with ULINK debugger
- Application is loaded to internal Flash.
- Switch S2 (INT1) is used as GPIO and sampled
(jumper positions: J1= off, J7= on)
- potentiometer POT1 is sampled as AIN0
(jumper position: J2= on)
- serial port COM1 parameters: 9600 baud, no parity,
8-bits, 1 stop bit, flow control none
MCB2130: Keil MCB2130 evaluation board with ULINK debugger
- Application is loaded to internal Flash.
- Switch S2 (INT1) is used as GPIO and sampled
(jumper positions: J1= off, J7= on)
- potentiometer POT1 is sampled as AIN1
(jumper position: J2= on)
- serial port COM1 parameters: 9600 baud, no parity,
8-bits, 1 stop bit, flow control none
立即下載此資源
提示：下載后請用壓縮軟件解壓，推薦使用 WinRAR 或 7-Zip
資源說明
下載說明
- 下載需消耗 2積分
- 24小時內重復下載不扣分
- 支持斷點續傳
- 資源永久有效
使用說明
- 下載后用解壓軟件解壓
- 推薦 WinRAR 或 7-Zip
- 如有密碼請查看說明
- 解壓后即可使用
積分獲取
- 上傳資源獲得積分
- 每日簽到免費領取
- 邀請好友注冊獎勵
- 查看詳情 →