** 	@(#)ge	4.1	(ULTRIX)	7/17/90**	Messages for get command of SCCS.*-3"e not allowed with m"You can't use both the -e and -m arguments on the same get command.-4"writable `...' exists"For safety's sake, SCCS won't overwrite an existing g-file if it's writable.If you don't need the g-file, remove it and rerun the get command.-5"nonexistent sid"The specified sid does not exist in thegiven file.Check for typos.-9"... already included"You mentioned the same delta twice with an -i and/or an -x argument.-10"... already excluded"You mentioned the same delta twice with an -x and/or an -i argument.-11"internal error in get/enter()"``Lasciate ogni speranza, voi ch'entrate''This shouldn't have happened!!Do a "help stuck".-17"being edited: `...'"You can't do a get with an -e argument because someone else alreadydid and hasn't made a delta yet.  If that someone else is really you,you can regenerate a new file to be edited, if necessary, by using the -kargument.  If you want to cancel the reservation entirely, see yourSCCS administrator, and tell him/her you want the p-file edited.The data in quotes is from the p-file.-18"being edited: `...'"Someone else has done a get with an -e argument.This can't hurt what you're doing,but isn't it nice to know that someone elseis making deltas to this file too?-19"release locked against editing"The release retrieved by `get' for editing purposes (get -e )is locked against further editing."prs -d:LK:" on the SCCS file tells you which releases are locked.The `admin' command is used to lock and unlock releases.-20"curdir failed"Re-check what you did.  Re-try the command.  If the problem persists,contact your local UNIX administrator.-21"cannot change directory"If you know the directory name, then check to see if it exists.Re-try the command.  If the problem persists, contact yourlocal UNIX administrator.-22"r out of range"The release number specified with the -r keyletter is out of range.This means the number was greater than 9999 or less than 1.