?? stm8_interrupt_vector.c
字號:
/* BASIC INTERRUPT VECTORS TABLE FOR STM8 devices
* Copyright (c) 2008 STMicroelectronics
*/
#include "stm8s_it.h"
extern void @near _stext(); /* startup routine */
void @near (* const _vectab[])() = {
(void @near (*)())0x8200,
_stext, /* reset */
(void @near (*)())0x8200,
NonHandledInterrupt, /* TRAP - Software interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq0 - External Top Level interrupt (TLI) */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq1 - Auto Wake Up from Halt interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq2 - Clock Controller interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq3 - External interrupt 0 (GPIOA) */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq4 - External interrupt 1 (GPIOB) */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq5 - External interrupt 2 (GPIOC) */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq6 - External interrupt 3 (GPIOD) */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq7 - External interrupt 4 (GPIOE) */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq8 - CAN Rx interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq9 - CAN Tx/ER/SC interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq10 - SPI End of transfer interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq11 - TIM1 Update/Overflow/Trigger/Break interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq12 - TIM1 Capture/Compare interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq13 - TIM2 Update/Overflow/Break interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq14 - TIM2 Capture/Compare interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq15 - TIM3 Update/Overflow/Break interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq16 - TIM3 Capture/Compare interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq17 - UART1 Tx complete interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq18 - UART1 Rx interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq19 - I2C interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq20 - UART2/UART3 Tx interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq21 - UART2/UART3 Rx interrupt */
(void @near (*)())0x8200,
ADC1_IRQHandler, /* irq22 - ADC1 / ADC2 end of conversion interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq23 - TIM4 Update/Overflow interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq24 - FLASH interrupt */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq25 - Reserved */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq26 - Reserved */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq27 - Reserved */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq28 - Reserved */
(void @near (*)())0x8200,
NonHandledInterrupt, /* irq29 - Reserved */
};
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -