compile_command="$compile_command $arg"	  finalize_command="$finalize_command $arg"	  ;;	esac	continue	;;      -L*)	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`	# We need an absolute path.	case $dir in	[\\/]* | [A-Za-z]:[\\/]*) ;;	*)	  absdir=`cd "$dir" && pwd`	  if test -z "$absdir"; then	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2	    exit 1	  fi	  dir="$absdir"	  ;;	esac	case "$deplibs " in	*" -L$dir "*) ;;	*)	  deplibs="$deplibs -L$dir"	  lib_search_path="$lib_search_path $dir"	  ;;	esac	case $host in	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)	  case :$dllsearchpath: in	  *":$dir:"*) ;;	  *) dllsearchpath="$dllsearchpath:$dir";;	  esac	  ;;	esac	continue	;;      -l*)	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then	  case $host in	  *-*-cygwin* | *-*-pw32* | *-*-beos*)	    # These systems don't actually have a C or math library (as such)	    continue	    ;;	  *-*-mingw* | *-*-os2*)	    # These systems don't actually have a C library (as such)	    test "X$arg" = "X-lc" && continue	    ;;	  *-*-openbsd*)	    # Do not include libc due to us having libc/libc_r.	    test "X$arg" = "X-lc" && continue	    ;;	  esac	 elif test "X$arg" = "X-lc_r"; then	  case $host in	  *-*-openbsd*)	    # Do not include libc_r directly, use -pthread flag.	    continue	    ;;	  esac	fi	deplibs="$deplibs $arg"	continue	;;      -module)	module=yes	continue	;;      -no-fast-install)	fast_install=no	continue	;;      -no-install)	case $host in	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)	  # The PATH hackery in wrapper scripts is required on Windows	  # in order for the loader to find any dlls it needs.	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2	  fast_install=no	  ;;	*) no_install=yes ;;	esac	continue	;;      -no-undefined)	allow_undefined=no	continue	;;      -o) prev=output ;;      -release)	prev=release	continue	;;      -rpath)	prev=rpath	continue	;;      -R)	prev=xrpath	continue	;;      -R*)	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`	# We need an absolute path.	case $dir in	[\\/]* | [A-Za-z]:[\\/]*) ;;	*)	  $echo "$modename: only absolute run-paths are allowed" 1>&2	  exit 1	  ;;	esac	case "$xrpath " in	*" $dir "*) ;;	*) xrpath="$xrpath $dir" ;;	esac	continue	;;      -static)	# The effects of -static are defined in a previous loop.	# We used to do the same as -all-static on platforms that	# didn't have a PIC flag, but the assumption that the effects	# would be equivalent was wrong.  It would break on at least	# Digital Unix and AIX.	continue	;;      -thread-safe)	thread_safe=yes	continue	;;      -version-info)	prev=vinfo	continue	;;      -Wc,*)	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`	arg=	save_ifs="$IFS"; IFS=','	for flag in $args; do	  IFS="$save_ifs"	  case $flag in	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")	    flag="\"$flag\""	    ;;	  esac	  arg="$arg $wl$flag"	  compiler_flags="$compiler_flags $flag"	done	IFS="$save_ifs"	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`	;;      -Wl,*)	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`	arg=	save_ifs="$IFS"; IFS=','	for flag in $args; do	  IFS="$save_ifs"	  case $flag in	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")	    flag="\"$flag\""	    ;;	  esac	  arg="$arg $wl$flag"	  compiler_flags="$compiler_flags $wl$flag"	  linker_flags="$linker_flags $flag"	done	IFS="$save_ifs"	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`	;;      -Xcompiler)	prev=xcompiler	continue	;;      -Xlinker)	prev=xlinker	continue	;;      # Some other compiler flag.      -* | +*)	# Unknown arguments in both finalize_command and compile_command need	# to be aesthetically quoted because they are evaled later.	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`	case $arg in	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")	  arg="\"$arg\""	  ;;	esac	;;      *.lo | *.$objext)	# A library or standard object.	if test "$prev" = dlfiles; then	  # This file was specified with -dlopen.	  if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then	    dlfiles="$dlfiles $arg"	    prev=	    continue	  else	    # If libtool objects are unsupported, then we need to preload.	    prev=dlprefiles	  fi	fi	if test "$prev" = dlprefiles; then	  # Preload the old-style object.	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`	  prev=	else	  case $arg in	  *.lo) libobjs="$libobjs $arg" ;;	  *) objs="$objs $arg" ;;	  esac	fi	;;      *.$libext)	# An archive.	deplibs="$deplibs $arg"	old_deplibs="$old_deplibs $arg"	continue	;;      *.la)	# A libtool-controlled library.	if test "$prev" = dlfiles; then	  # This library was specified with -dlopen.	  dlfiles="$dlfiles $arg"	  prev=	elif test "$prev" = dlprefiles; then	  # The library was specified with -dlpreopen.	  dlprefiles="$dlprefiles $arg"	  prev=	else	  deplibs="$deplibs $arg"	fi	continue	;;      # Some other compiler argument.      *)	# Unknown arguments in both finalize_command and compile_command need	# to be aesthetically quoted because they are evaled later.	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`	case $arg in	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")	  arg="\"$arg\""	  ;;	esac	;;      esac # arg      # Now actually substitute the argument into the commands.      if test -n "$arg"; then	compile_command="$compile_command $arg"	finalize_command="$finalize_command $arg"      fi    done # argument parsing loop    if test -n "$prev"; then      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2      $echo "$help" 1>&2      exit 1    fi    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then      eval arg=\"$export_dynamic_flag_spec\"      compile_command="$compile_command $arg"      finalize_command="$finalize_command $arg"    fi    # calculate the name of the file, without its directory    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`    libobjs_save="$libobjs"    if test -n "$shlibpath_var"; then      # get the directories listed in $shlibpath_var      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`    else      shlib_search_path=    fi    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`    if test "X$output_objdir" = "X$output"; then      output_objdir="$objdir"    else      output_objdir="$output_objdir/$objdir"    fi    # Create the object directory.    if test ! -d $output_objdir; then      $show "$mkdir $output_objdir"      $run $mkdir $output_objdir      status=$?      if test $status -ne 0 && test ! -d $output_objdir; then	exit $status      fi    fi    # Determine the type of output    case $output in    "")      $echo "$modename: you must specify an output file" 1>&2      $echo "$help" 1>&2      exit 1      ;;    *.$libext) linkmode=oldlib ;;    *.lo | *.$objext) linkmode=obj ;;    *.la) linkmode=lib ;;    *) linkmode=prog ;; # Anything else should be a program.    esac    specialdeplibs=    libs=    # Find all interdependent deplibs by searching for libraries    # that are linked more than once (e.g. -la -lb -la)    for deplib in $deplibs; do      case "$libs " in      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;      esac      libs="$libs $deplib"    done    deplibs=    newdependency_libs=    newlib_search_path=    need_relink=no # whether we're linking any uninstalled libtool libraries    notinst_deplibs= # not-installed libtool libraries    notinst_path= # paths that contain not-installed libtool libraries    case $linkmode in    lib)	passes="conv link"	for file in $dlfiles $dlprefiles; do	  case $file in	  *.la) ;;	  *)	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2	    exit 1	    ;;	  esac	done	;;    prog)	compile_deplibs=	finalize_deplibs=	alldeplibs=no	newdlfiles=	newdlprefiles=	passes="conv scan dlopen dlpreopen link"	;;    *)  passes="conv"	;;    esac    for pass in $passes; do      if test $linkmode = prog; then	# Determine which files to process	case $pass in	dlopen)	  libs="$dlfiles"	  save_deplibs="$deplibs" # Collect dlpreopened libraries	  deplibs=	  ;;	dlpreopen) libs="$dlprefiles" ;;	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;	esac      fi      for deplib in $libs; do	lib=	found=no	case $deplib in	-l*)	  if test $linkmode = oldlib && test $linkmode = obj; then	    $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2	    continue	  fi	  if test $pass = conv; then	    deplibs="$deplib $deplibs"	    continue	  fi	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do	    # Search the libtool library	    lib="$searchdir/lib${name}.la"	    if test -f "$lib"; then	      found=yes	      break	    fi	  done	  if test "$found" != yes; then	    # deplib doesn't seem to be a libtool library	    if test "$linkmode,$pass" = "prog,link"; then	      compile_deplibs="$deplib $compile_deplibs"	      finalize_deplibs="$deplib $finalize_deplibs"	    else	      deplibs="$deplib $deplibs"	      test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"	    fi	    continue	  fi	  ;; # -l	-L*)	  case $linkmode in	  lib)	    deplibs="$deplib $deplibs"	    test $pass = conv && continue	    newdependency_libs="$deplib $newdependency_libs"	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`	    ;;	  prog)	    if test $pass = conv; then	      deplibs="$deplib $deplibs"	      continue	    fi	    if test $pass = scan; then	      deplibs="$deplib $deplibs"	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`	    else	      compile_deplibs="$deplib $compile_deplibs"	      finalize_deplibs="$deplib $finalize_deplibs"	    fi	    ;;	  *)	    $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2	    ;;	  esac # linkmode	  continue	  ;; # -L	-R*)	  if test $pass = link; then	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`	    # Make sure the xrpath contains only unique directories.	    case "$xrpath " in	    *" $dir "*) ;;	    *) xrpath="$xrpath $dir" ;;	    esac	  fi	  deplibs="$deplib $deplibs"	  continue	  ;;	*.la) lib="$deplib" ;;	*.$libext)	  if test $pass = conv; then	    deplibs="$deplib $deplibs"	    continue	  fi	  case $linkmode in	  lib)	    if test "$deplibs_check_method" != pass_all; then	      echo	      echo "*** Warning: This library needs some functionality provided by $deplib."	      echo "*** I have the capability to make that library automatically link in when"	      echo "*** you link to this library.  But I can only do this if you have a"	      echo "*** shared version of the library, which you do not appear to have."	    else	      echo	      echo "*** Warning: Linking the shared library $output against the"	      echo "*** static library $deplib is not portable!"	      deplibs="$deplib $deplibs"	    fi	    continue	    ;;	  prog)	    if test $pass != link; then	      deplibs="$deplib $deplibs"	    else	      compile_deplibs="$deplib $compile_deplibs"	      finalize_deplibs="$deplib $finalize_deplibs"	    fi	    continue	    ;;	  esac # linkmode	  ;; # *.$libext	*.lo | *.$objext)	  if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then	    # If there is no dlopen support or we're linking statically,	    # we need to preload.	    newdlprefiles="$newdlprefiles $deplib"	    compile_deplibs="$deplib $compile_deplibs"	    finalize_deplibs="$deplib $finalize_deplibs"	  else	    newdlfiles="$newdlfiles $deplib"	  fi	  continue	  ;;