;	FreeRTOS V2.5.0 - Copyright (C) 2003, 2004 Richard Barry.
;
;	This file is part of the FreeRTOS distribution.
;
;	FreeRTOS is free software; you can redistribute it and/or modify
;	it under the terms of the GNU General Public License as published by
;	the Free Software Foundation; either version 2 of the License, or
;	(at your option) any later version.
;
;	FreeRTOS is distributed in the hope that it will be useful,
;	but WITHOUT ANY WARRANTY; without even the implied warranty of
;	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;	GNU General Public License for more details.
;
;	You should have received a copy of the GNU General Public License
;	along with FreeRTOS; if not, write to the Free Software
;	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
;
;	A special exception to the GPL can be applied should you wish to distribute
;	a combined work that includes FreeRTOS, without being obliged to provide
;	the source code for any proprietary components.  See the licensing section 
;	of http://www.FreeRTOS.org for full details of how and when the exception
;	can be applied.
;
;	***************************************************************************
;	See http://www.FreeRTOS.org for documentation, latest information, license 
;	and contact details.  Please ensure to read the configuration and relevant 
;	port sections of the online documentation.
;	***************************************************************************

#include <iom323.h>

; Declare all extern symbols here - including any ISRs that are referenced in
; the vector table.

; ISR functions
; -------------
EXTERN SIG_OUTPUT_COMPARE1A
EXTERN SIG_UART_RECV
EXTERN SIG_UART_DATA


; Functions used by scheduler
; ---------------------------
EXTERN vTaskSwitchContext
EXTERN pxCurrentTCB
EXTERN vTaskIncrementTick

; Functions implemented in this file
; ----------------------------------
PUBLIC vPortYield
PUBLIC vPortYieldFromTick
PUBLIC vPortStart


; Interrupt vector table.
; -----------------------
;
; For simplicity the RTOS tick interrupt routine uses the __task keyword.
; As the IAR compiler does not permit a function to be declared using both
; __task and __interrupt, the use of __task necessitates that the interrupt
; vector table be setup manually.
;
; To write an ISR, implement the ISR function using the __interrupt keyword
; but do not install the interrupt using the "#pragma vector=ABC" method.
; Instead manually place the name of the ISR in the vector table using an
; ORG and jmp instruction as demonstrated below.
; You will also have to add an EXTERN statement at the top of the file.

	ASEG


	ORG TIMER1_COMPA_vect				; Vector address
		jmp SIG_OUTPUT_COMPARE1A		; ISR

	ORG USART_RXC_vect					; Vector address
		jmp SIG_UART_RECV				; ISR

	ORG USART_UDRE_vect					; Vector address
		jmp SIG_UART_DATA				; ISR

	
	RSEG CODE



; Saving and Restoring a Task Context and Task Switching
; ------------------------------------------------------
;
; The IAR compiler does not fully support inline assembler, so saving and
; restoring a task context has to be written in an asm file.  
;
; vPortYield() and vPortYieldFromTick() are usually written in C.  Doing
; so in this case would required calls to be made to portSAVE_CONTEXT() and
; portRESTORE_CONTEXT().  This is dis-advantageous as the context switch 
; function would require two extra jump and return instructions over the 
; WinAVR equivalent.  
;
; To avoid this I have opted to implement both vPortYield() and 
; vPortYieldFromTick() in this assembly file.  For convenience
; portSAVE_CONTEXT and portRESTORE_CONTEXT are implemented as macros.

portSAVE_CONTEXT MACRO
	st	-y, r0			; First save the r0 register - we need to use this.
	in	r0, SREG		; Obtain the SREG value so we can disable interrupts...
	cli					; ... as soon as possible.
	st	-y, r0			; Store the SREG as it was before we disabled interrupts.

	in	r0, SPL			; Next store the hardware stack pointer.  The IAR...
	st	-y, r0			; ... compiler uses the hardware stack as a call stack ...
	in	r0, SPH			; ...  only.
	st	-y, r0

	st	-y, r1			; Now store the rest of the registers.  Dont store the ...
	st	-y, r2			; ... the Y register here as it is used as the software
	st	-y, r3			; stack pointer and will get saved into the TCB.
	st	-y, r4
	st	-y, r5
	st	-y, r6
	st	-y, r7
	st	-y, r8
	st	-y, r9
	st	-y, r10
	st	-y, r11
	st	-y, r12
	st	-y, r13
	st	-y, r14
	st	-y, r15
	st	-y, r16
	st	-y, r17
	st	-y, r18
	st	-y, r19
	st	-y, r20
	st	-y, r21
	st	-y, r22
	st	-y, r23
	st	-y, r24
	st	-y, r25
	st	-y, r26
	st	-y, r27
	st	-y, r30
	st	-y, r31

	lds	r26, pxCurrentTCB		; Finally save the software stack pointer (Y ...
	lds	r27, pxCurrentTCB + 1	; ... register) into the TCB.
	st	x+, r28
	st	x+, r29

	ENDM


portRESTORE_CONTEXT MACRO
	lds	r26, pxCurrentTCB
	lds	r27, pxCurrentTCB + 1	; Restore the software stack pointer from ...
	ld	r28, x+					; the TCB into the software stack pointer (...
	ld	r29, x+					; ... the Y register).

	ld	r31, y+					; Restore the registers down to R0.  The Y
	ld	r30, y+					; register is missing from this list as it
	ld	r27, y+					; has already been restored.
	ld	r26, y+ 
	ld	r25, y+
	ld	r24, y+
	ld	r23, y+
	ld	r22, y+
	ld	r21, y+
	ld	r20, y+
	ld	r19, y+
	ld	r18, y+
	ld	r17, y+
	ld	r16, y+
	ld	r15, y+
	ld	r14, y+
	ld	r13, y+
	ld	r12, y+
	ld	r11, y+
	ld	r10, y+
	ld	r9, y+
	ld	r8, y+
	ld	r7, y+
	ld	r6, y+
	ld	r5, y+
	ld	r4, y+
	ld	r3, y+
	ld	r2, y+
	ld	r1, y+

	ld	r0, y+					; The next thing on the stack is the ...
	out	SPH, r0					; ... hardware stack pointer.
	ld	r0, y+
	out	SPL, r0

	ld	r0, y+					; Next there is the SREG register.
	out SREG, r0

	ld	r0, y+					; Finally we have finished with r0, so restore r0.
	
	ENDM



; vPortYield() and vPortYieldFromTick()
; -------------------------------------
;
; Manual and preemptive context switch functions respectively.  
; The IAR compiler does not fully support inline assembler, 
; so these are implemented here rather than the more usually 
; place of within port.c.

vPortYield:
	portSAVE_CONTEXT			; Save the context of the current task.
	call vTaskSwitchContext		; Call the scheduler.
	portRESTORE_CONTEXT			; Restore the context of whichever task the ...
	ret							; ... scheduler decided should run.

vPortYieldFromTick:
	portSAVE_CONTEXT			; Save the context of the current task.
	call vTaskIncrementTick		; Call the timer tick function.
	call vTaskSwitchContext		; Call the scheduler.
	portRESTORE_CONTEXT			; Restore the context of whichever task the ...
	ret							; ... scheduler decided should run.

; vPortStart()
; ------------
;
; Again due to the lack of inline assembler, this is required
; to get access to the portRESTORE_CONTEXT macro.

vPortStart:
	portRESTORE_CONTEXT
	ret


; Just a filler for unused interrupt vectors.
vNoISR:
	reti


	END