/*H**************************************************************************
* NAME:         lcd_drv.h         
*----------------------------------------------------------------------------
* Copyright (c) 2002 Atmel.
*----------------------------------------------------------------------------
* RELEASE:      snd1c-demo-hdd-0_2_0      
* REVISION:     1.5     
*----------------------------------------------------------------------------
* PURPOSE:
* This file contains the LCD controller definition
*
* NOTES:
* Definition for Hitachi HD44780 LCD controller:
*
* - 2x16 characters
* - 8 bit interface
*
* DB7:0     = AD7:0
* RS        = A0
* R/W       = '0' not used, busy is never tested
* E         = P3.6/WR# inverted
*****************************************************************************/

#ifndef _LCD_DRV_H_
#define _LCD_DRV_H_

/*_____ I N C L U D E S ____________________________________________________*/


/*_____ M A C R O S ________________________________________________________*/

/*----- LCD timing -----*/
#define TEMPO_40US   (Byte)(0.0019*FPER)    /* tempo duration of 40 us */
#define TEMPO_1_5MS  (Uint16)(0.06*FPER)    /* tempo duration of 1.5 ms */
#define TEMPO_30MS   (TEMPO_1_5MS * 20)     /* tempo duration of 30 ms */

/*----- LCD control -----*/
#define LCD_NB_LINE     (Byte)0x02      /* 2 display lines */
#define LCD_NB_COLUMN   (Byte)0x10      /* 16 characters per line */

#define C_R             (char)0x0D
#define L_F             (char)0x0A
#define B_S             (char)0x08

/*----- LCD command -----*/
#define LCD_CLR         (Byte)0x01      /* clear entire display */

#define LCD_HOME        (Byte)0x02      /* cursor back to home position */

#define LCD_SET         (Byte)0x04      /* set cursor move direction and specifies shift or display */
#define LCD_NO_INC      (Byte)0x00      /* inc OFF */
#define LCD_INC         (Byte)0x02      /* inc ON */
#define LCD_NO_SHIFT    (Byte)0x00      /* no shift */
#define LCD_SHIFT       (Byte)0x01      /* shift entire display */

#define LCD_DISPLAY     (Byte)0x08      /* control Display,cursor,blink - ON / OFF */
#define LCD_DISP_OFF    (Byte)0x08      /* display OFF */
#define LCD_DISP_ON     (Byte)0x0C      /* display ON */
#define LCD_CURS_OFF    (Byte)0x00      /* cursor OFF */
#define LCD_CURS_ON     (Byte)0x02      /* cursor ON */
#define LCD_BLINK_OFF   (Byte)0x00      /* cursor blink OFF */
#define LCD_BLINK_ON    (Byte)0x01      /* cursor blink ON */

#define LCD_CURS        (Byte)0x10      /* move Cursor and shift display */
#define LCD_CURS_SHIFT  (Byte)0x00      /* cursor shift */
#define LCD_DISP_SHIFT  (Byte)0x08      /* display shift */
#define LCD_RIGHT       (Byte)0x04      /* cursor/display shift right */
#define LCD_LEFT        (Byte)0x00      /* cursor/display shift left */

#define LCD_FCTSET      (Byte)0x20      /* Set: 4 bits mode , nb of lines, nb of dot matrix */
#define LCD_4BIT        (Byte)0x00      /* command for 4 bit mode */
#define LCD_8BIT        (Byte)0x10      /* command for 8 bit mode */
#define LCD_1_LINE      (Byte)0x00      /* set in 1 Line mode */
#define LCD_2_LINE      (Byte)0x08      /* set in 2 Line mode */
#define LCD_5x8DOTS     (Byte)0x00      /* set in 5*8 dots   */
#define LCD_5x11DOTS    (Byte)0x04      /* set in 5*11 dots   */

#define LCD_CGRAM       (Byte)0x40      /* Set CG RAM address */
#define LCD_DDRAM       (Byte)0x80      /* Set DD RAM adresse */
#define LCD_BF          (Byte)0x08      /* busy flag */
#define LCD_SHIFT       (Byte)0x01      /* shift ON */
#define LCD_DATA        (Byte)0x0F      /* data mask on 4 bit  */
#define LCD_LINE0       (Byte)0x80      /* line 0 command */
#define LCD_LINE1       (Byte)0xC0      /* line 1 command */
#define LCD_LINE_OFFSET (Byte)0x40      /* line address offset */

/*----- CGRAM -----*/
#define CGRAM_CHAR_SIZE (Byte)0x08      /* 8 patterns to define a char */


/*_____ D E F I N I T I O N ________________________________________________*/

extern  xdata Byte  lcd_cmd;
extern  xdata Byte  lcd_data;


/*_____ D E C L A R A T I O N ______________________________________________*/

#define Lcd_cur_on()                    lcd_cmd = (LCD_DISP_ON | LCD_CURS_ON | LCD_BLINK_ON)
#define Lcd_cur_off()                   lcd_cmd = LCD_DISP_ON
#define Lcd_put_char(c)                 lcd_data = c
#define Lcd_put_cmd(c)                  lcd_cmd = c

void    lcd_init (void);
void    lcd_clr (void);
void    lcd_set_cur (Byte, Byte);
void    lcd_cgram (Byte, Byte code *);
void    lcd_putchar (char);



#endif  /* _LCD_DRV_H_ */