?? cc1100.lis
字號:
.module cc1100.c
.area lit(rom, con, rel)
0000 _rfSettings::
0000 00 .byte 0
0001 0B .byte 11
0002 00 .byte 0
0003 10 .byte 16
0004 A7 .byte 167
0005 62 .byte 98
0006 2D .byte 45
0007 3B .byte 59
0008 73 .byte 115
0009 A2 .byte 162
000A F8 .byte 248
000B 00 .byte 0
000C 00 .byte 0
000D B6 .byte 182
000E 10 .byte 16
000F 18 .byte 24
0010 1D .byte 29
0011 1C .byte 28
0012 C7 .byte 199
0013 00 .byte 0
0014 B2 .byte 178
0015 EA .byte 234
0016 0A .byte 10
0017 00 .byte 0
0018 11 .byte 17
0019 59 .byte 89
001A 88 .byte 136
001B 31 .byte 49
001C 0B .byte 11
001D 06 .byte 6
001E 06 .byte 6
001F 05 .byte 5
0020 45 .byte 69
0021 F0 .byte 240
0022 F0 .byte 240
0023 .dbfile E:\學習基地\IMPORT~1\CC1100-RF-Design\cc1100-design\Firmware\M8_cc1100_receive\cc1100.c
0023 .dbsym e rfSettings _rfSettings kX
.area text(rom, con, rel)
0000 .dbfile E:\學習基地\IMPORT~1\CC1100-RF-Design\cc1100-design\Firmware\M8_cc1100_receive\cc1100.c
0000 .dbfunc e delay _delay fV
0000 ; i -> R20,R21
0000 ; s -> R16,R17
.even
0000 _delay::
0000 00D0 rcall push_gset1
0002 .dbline -1
0002 .dbline 105
0002 ; /*C**************************************************************************
0002 ; * NAME: cc1100.c
0002 ; *----------------------------------------------------------------------------
0002 ; * Copyright (c) 2007 endylu
0002 ; *----------------------------------------------------------------------------
0002 ; * RELEASE: M8-cc1100
0002 ; * REVISION: 1.0
0002 ; *----------------------------------------------------------------------------
0002 ; * PURPOSE:
0002 ; * This file include cc1100 receive and send function
0002 ; *****************************************************************************/
0002 ;
0002 ; /*_____ I N C L U D E S ____________________________________________________*/
0002 ;
0002 ; #include <iom8v.h>
0002 ; #include <macros.h>
0002 ; #include "main.h"
0002 ; /*_____ M A C R O S ________________________________________________________*/
0002 ;
0002 ;
0002 ; /*_____ D E F I N I T I O N ________________________________________________*/
0002 ;
0002 ;
0002 ; //------------------------------------------------------------------------------------------------------
0002 ; // Chipcon
0002 ; // Product = CC1100
0002 ; // Chip version = E
0002 ; // Crystal accuracy = 40 ppm
0002 ; // X-tal frequency = 26 MHz
0002 ; // RF output power = 0 dBm
0002 ; // RX filterbandwidth = 540.000000 kHz
0002 ; // Deviation = 0.000000
0002 ; // Datarate = 250.000000 kbps
0002 ; // Modulation = (7) MSK
0002 ; // Manchester enable = (0) Manchester disabled
0002 ; // RF Frequency = 433.000000 MHz
0002 ; // Channel spacing = 199.951172 kHz
0002 ; // Channel number = 0
0002 ; // Optimization = Sensitivity
0002 ; // Sync mode = (3) 30/32 sync word bits detected
0002 ; // Format of RX/TX data = (0) Normal mode, use FIFOs for RX and TX
0002 ; // CRC operation = (1) CRC calculation in TX and CRC check in RX enabled
0002 ; // Forward Error Correction = (0) FEC disabled
0002 ; // Length configuration = (1) Variable length packets, packet length configured by the first received byte after sync word.
0002 ; // Packetlength = 255
0002 ; // Preamble count = (2) 4 bytes
0002 ; // Append status = 1
0002 ; // Address check = (0) No address check
0002 ; // FIFO autoflush = 0
0002 ; // Device address = 0
0002 ; // GDO0 signal selection = ( 6) Asserts when sync word has been sent / received, and de-asserts at the end of the packet
0002 ; // GDO2 signal selection = (11) Serial Clock
0002 ; const RF_SETTINGS rfSettings = {
0002 ; 0x00,
0002 ; 0x0B, // FSCTRL1 Frequency synthesizer control.
0002 ; 0x00, // FSCTRL0 Frequency synthesizer control.
0002 ; 0x10, // FREQ2 Frequency control word, high byte.
0002 ; 0xA7, // FREQ1 Frequency control word, middle byte.
0002 ; 0x62, // FREQ0 Frequency control word, low byte.
0002 ; 0x2D, // MDMCFG4 Modem configuration.
0002 ; 0x3B, // MDMCFG3 Modem configuration.
0002 ; 0x73, // MDMCFG2 Modem configuration.
0002 ; 0xa2, // MDMCFG1 Modem configuration.
0002 ; 0xF8, // MDMCFG0 Modem configuration.
0002 ;
0002 ; 0x00, // CHANNR Channel number.
0002 ; 0x00, // DEVIATN Modem deviation setting (when FSK modulation is enabled).
0002 ; 0xB6, // FREND1 Front end RX configuration.
0002 ; 0x10, // FREND0 Front end RX configuration.
0002 ; 0x18, // MCSM0 Main Radio Control State Machine configuration.
0002 ; 0x1D, // FOCCFG Frequency Offset Compensation Configuration.
0002 ; 0x1C, // BSCFG Bit synchronization Configuration.
0002 ; 0xC7, // AGCCTRL2 AGC control.
0002 ; 0x00, // AGCCTRL1 AGC control.
0002 ; 0xB2, // AGCCTRL0 AGC control.
0002 ;
0002 ; 0xEA, // FSCAL3 Frequency synthesizer calibration.
0002 ; 0x0A, // FSCAL2 Frequency synthesizer calibration.
0002 ; 0x00, // FSCAL1 Frequency synthesizer calibration.
0002 ; 0x11, // FSCAL0 Frequency synthesizer calibration.
0002 ; 0x59, // FSTEST Frequency synthesizer calibration.
0002 ; 0x88, // TEST2 Various test settings.
0002 ; 0x31, // TEST1 Various test settings.
0002 ; 0x0B, // TEST0 Various test settings.
0002 ; 0x06, //IOCFG2 GDO2 output pin configuration.
0002 ; 0x06, // IOCFG0 GDO0 output pin configuration. Refer to SmartRF?Studio User Manual for detailed pseudo register explanation.
0002 ;
0002 ; 0x05, // PKTCTRL1 Packet automation control.
0002 ; 0x45, // PKTCTRL0 Packet automation control.
0002 ; ID_Oneself, // ADDR Device address.
0002 ; 0xf0, // PKTLEN Packet length.
0002 ; };
0002 ;
0002 ; /*_____ D E C L A R A T I O N ______________________________________________*/
0002 ;
0002 ;
0002 ;
0002 ; //*****************************************************************************************
0002 ; //函數名：delay(unsigned int s)
0002 ; //輸入：時間
0002 ; //輸出：無
0002 ; //功能描述：普通廷時
0002 ; //*****************************************************************************************
0002 ; void delay(unsigned int s)
0002 ; {
0002 .dbline 107
0002 4427 clr R20
0004 5527 clr R21
0006 02C0 rjmp L5
0008 L2:
0008 .dbline 107
0008 L3:
0008 .dbline 107
0008 4F5F subi R20,255 ; offset = 1
000A 5F4F sbci R21,255
000C L5:
000C .dbline 107
000C ; unsigned int i;
000C ; for(i=0; i<s; i++);
000C 4017 cp R20,R16
000E 5107 cpc R21,R17
0010 D8F3 brlo L2
0012 .dbline 108
0012 4427 clr R20
0014 5527 clr R21
0016 02C0 rjmp L9
0018 L6:
0018 .dbline 108
0018 L7:
0018 .dbline 108
0018 4F5F subi R20,255 ; offset = 1
001A 5F4F sbci R21,255
001C L9:
001C .dbline 108
001C ; for(i=0; i<s; i++);
001C 4017 cp R20,R16
001E 5107 cpc R21,R17
0020 D8F3 brlo L6
0022 .dbline -2
0022 L1:
0022 00D0 rcall pop_gset1
0024 .dbline 0 ; func end
0024 0895 ret
0026 .dbsym r i 20 i
0026 .dbsym r s 16 i
0026 .dbend
0026 .dbfunc e halWait _halWait fV
0026 ; timeout -> R16,R17
.even
0026 _halWait::
0026 .dbline -1
0026 .dbline 112
0026 ; }
0026 ;
0026 ;
0026 ; void halWait(INT16U timeout) {
0026 L11:
0026 .dbline 113
0026 ; do {
0026 .dbline 114
0026 ; _nop_();
0026 0000 nop
0028 .dbline 115
0028 ; _nop_();
0028 0000 nop
002A .dbline 116
002A ; _nop_();
002A 0000 nop
002C .dbline 117
002C ; _nop_();
002C 0000 nop
002E .dbline 118
002E ; _nop_();
002E 0000 nop
0030 .dbline 119
0030 ; _nop_();
0030 0000 nop
0032 .dbline 120
0032 ; _nop_();
0032 0000 nop
0034 .dbline 121
0034 ; _nop_();
0034 0000 nop
0036 .dbline 122
0036 ; _nop_();
0036 0000 nop
0038 .dbline 123
0038 ; _nop_();
0038 0000 nop
003A .dbline 124
003A ; _nop_();
003A 0000 nop
003C .dbline 125
003C ; _nop_();
003C 0000 nop
003E .dbline 126
003E ; _nop_();
003E 0000 nop
0040 .dbline 127
0040 ; _nop_();
0040 0000 nop
0042 .dbline 128
0042 ; _nop_();
0042 0000 nop
0044 .dbline 129
0044 L12:
0044 .dbline 129
0044 ; } while (--timeout);
0044 C801 movw R24,R16
0046 0197 sbiw R24,1
0048 8C01 movw R16,R24
004A 0030 cpi R16,0
004C 0107 cpc R16,R17
004E 59F7 brne L11
0050 X0:
0050 .dbline -2
0050 L10:
0050 .dbline 0 ; func end
0050 0895 ret
0052 .dbsym r timeout 16 i
0052 .dbend
0052 .dbfunc e UartInit _UartInit fV
.even
0052 _UartInit::
0052 .dbline -1
0052 .dbline 139
0052 ; }
0052 ;
0052 ; /*****************************************************************************************
0052 ; //函數名:UartInit()
0052 ; //輸入：無
0052 ; //輸出：無
0052 ; //功能描述：串口初始化程序
0052 ; /*****************************************************************************************/
0052 ; void UartInit(void) //用232串口發數據到PC，收集數據
0052 ; {
0052 .dbline 140
0052 ; UCSRB=(1<<RXEN)|(1<<TXEN);//允許發送和接收
0052 88E1 ldi R24,24
0054 8AB9 out 0xa,R24
0056 .dbline 141
0056 ; UBRRL= (F_osc/9600/16-1)%256;
0056 8FE2 ldi R24,47
0058 89B9 out 0x9,R24
005A .dbline 142
005A ; UBRRH= (F_osc/9600/16-1)/256;
005A 2224 clr R2
005C 20BC out 0x20,R2
005E .dbline 143
005E ; UCSRC=(1<<URSEL)|(1<<UCSZ1)|(1<<UCSZ0);//8位數據+1位STOP位
005E 86E8 ldi R24,134
0060 80BD out 0x20,R24
0062 .dbline -2
0062 L14:
0062 .dbline 0 ; func end
0062 0895 ret
0064 .dbend
0064 .dbfunc e SpiInit _SpiInit fV
.even
0064 _SpiInit::
0064 .dbline -1
0064 .dbline 148
0064 ; }
0064 ;
0064 ;
0064 ; void SpiInit(void)
0064 ; {
0064 .dbline 149
0064 ; DDRB|=(1<<SPI_DO);
0064 BB9A sbi 0x17,3
0066 .dbline 150
0066 ; DDRB|=(1<<SPI_Clock);
0066 BD9A sbi 0x17,5
0068 .dbline 151
0068 ; DDRB|=(1<<Chip_Select);
0068 BA9A sbi 0x17,2
006A .dbline 153
006A ;
006A ; PORTB|=(1<<SPI_DI);
006A C49A sbi 0x18,4
006C .dbline 156
006C ;
006C ;
006C ; CSN_0;
006C C298 cbi 0x18,2
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -