endEtherPacketAddrGet       /* Get packet addresses. */
    };

/*******************************************************************************
*
* sndsEndLoad - initialize the driver and device
*
* This routine initializes the driver and the device to the operational state.
* All of the device specific parameters are passed in the initString.
*
* The string contains the target specific parameters like this:
*
* "<unit>:<Speed>:<duplex>:<autoneg>"
*
* RETURNS: An END object pointer or NULL on error.
*/

END_OBJ* sndsEndLoad
    (
    char* initString		/* String to be parsed by the driver. */
    )
    {
    END_DEVICE 	*pDrvCtrl;

#if 0
    ENDLOGMSG (("Loading sndsEndEnd...\n", 1, 2, 3, 4, 5, 6));
#endif

	if (initString[0] == NULL)
	{
		strcpy (initString, "secEnd");
		return (END_OBJ *)0;
	}

	/* allocate the device structure */

    pDrvCtrl = (END_DEVICE *)calloc (sizeof (END_DEVICE), 1);
    if (pDrvCtrl == NULL)
		goto errorExit;

    /* parse the init string, filling in the device structure */

    if (sndsEndParse (pDrvCtrl, initString) == ERROR)
		goto errorExit;

    pDrvCtrl->ivecBdmaTx = INT_LVL_BDMATx;
    pDrvCtrl->ivecBdmaRx = INT_LVL_BDMARx;
    pDrvCtrl->ivecMacTx = INT_LVL_MACTx;
    pDrvCtrl->ivecMacRx = INT_LVL_MACRx;

    /* Ask the BSP to provide the ethernet address. */

    SYS_ENET_ADDR_GET(pDrvCtrl);

	strcpy (pDrvCtrl->end.devObject.name, "secEnd");
	strcpy (pDrvCtrl->end.devObject.description, "Samsung SNDS100 END Driver");

   /* initialize the END and MIB2 parts of the structure */

    /*
     * The M2 element must come from m2Lib.h 
     * This sndsEnd is set up for a DIX type ethernet device.
     */
    if (END_OBJ_INIT (&pDrvCtrl->end, (DEV_OBJ *)pDrvCtrl, "secEnd",
                      pDrvCtrl->unit, &endFuncTable,
                      "Samsung SNDS100 END Driver") == ERROR
     || END_MIB_INIT (&pDrvCtrl->end, M2_ifType_ethernet_csmacd,
                      &pDrvCtrl->enetAddr[0], 6, ETHERMTU,
                      END_SPEED)
		    == ERROR)
	goto errorExit;

    /* Perform memory allocation/distribution */

    if (sndsEndMemInit (pDrvCtrl) == ERROR)
		goto errorExit;

    /* reset and reconfigure the device */
    sndsEndConfig (pDrvCtrl);

    /* set the flags to indicate readiness */
    END_OBJ_READY (&pDrvCtrl->end, IFF_NOTRAILERS | IFF_BROADCAST | IFF_MULTICAST);
    return (&pDrvCtrl->end);

	errorExit:
    if (pDrvCtrl != NULL)
		free ((char *)pDrvCtrl);

    return NULL;
    }

/*******************************************************************************
*
* sndsEndParse - parse the init string
*
* Parse the input string.  Fill in values in the driver control structure.
*
* The initialization string format is:
* "<unit>:<Speed>:<duplex>:<autoneg>"
*
* .bS
* unit			Device unit number, a small integer.
* Speed			10 (10Mbps) or 100 (100 Mbps)
* duplex		0 (HDX) or 1 (FDX)
* autoneg		Autonegotiation disabled (0) or enabled (1)
* .bE
*
* RETURNS: OK or ERROR for invalid arguments.
*/

STATUS sndsEndParse
    (
    END_DEVICE * pDrvCtrl,	/* device pointer */
    char * initString		/* information string */
    )
    {
    char*	tok;
    char*	pHolder = NULL;
    
    /* Parse the initString */

     /* Unit number. */
    tok = strtok_r (initString, ":", &pHolder);
    if (tok == NULL)
	return ERROR;
    pDrvCtrl->unit = atoi (tok);

	/* netSpeed */
    tok = strtok_r (NULL, ":", &pHolder);
    if (tok == NULL)
	return ERROR;
    pDrvCtrl->netSpeed = atoi (tok);


	/* DuplexMode */
    tok = strtok_r (NULL, ":", &pHolder);
    if (tok == NULL)
	return ERROR;
    pDrvCtrl->duplexMode = atoi (tok);

	/* auto Negotiation */
    tok = strtok_r (NULL, ":", &pHolder);
    if (tok == NULL)
	return ERROR;
    pDrvCtrl->autoNeg = atoi (tok);

    return OK;
    }

/*******************************************************************************
*
* sndsEndMemInit - initialize memory for the chip
*
* This routine is highly specific to the device.  
*
* RETURNS: OK or ERROR.
*/

STATUS sndsEndMemInit
    (
    END_DEVICE * pDrvCtrl	/* device to be initialized */
    )
    {

    /*
     * This is how we would set up and END netPool using netBufLib(1).
     * This code is pretty generic.
     */
    
    if ((pDrvCtrl->end.pNetPool = (NET_POOL_ID) malloc (sizeof(NET_POOL))) == NULL)
        return (ERROR);

    endMclConfig.mBlkNum = END_MBLK_NUM;
    endClDescTbl[0].clNum = END_CL_NUM;
    endMclConfig.clBlkNum = endClDescTbl[0].clNum;

    /* Calculate the total memory for all the M-Blks and CL-Blks. */
    endMclConfig.memSize = (endMclConfig.mBlkNum * (MSIZE + sizeof (long))) +
                          (endMclConfig.clBlkNum * (CL_BLK_SZ + sizeof(long)));

    if ((endMclConfig.memArea = (char *) memalign (sizeof(long),
                                                  endMclConfig.memSize))
        == NULL)
        return (ERROR);
    
    /* Calculate the memory size of all the clusters. */
    endClDescTbl[0].memSize = (endClDescTbl[0].clNum * (endClDescTbl[0].clSize + 8))
        + sizeof(int);        /* +8 is for proper alignment */

    /* Allocate the memory for the clusters */
	endClDescTbl[0].memArea =
        (char *) malloc (endClDescTbl[0].memSize);

    if ((int)endClDescTbl[0].memArea == NULL)
        {
        return (ERROR);
        }

    /* Initialize the memory pool. */
    if (netPoolInit(pDrvCtrl->end.pNetPool, &endMclConfig,
                    &endClDescTbl[0], endClDescTblNumEnt, NULL) == ERROR)
        {
        return (ERROR);
        }
    return OK;
    }
/*******************************************************************************
*
* sndsEndStart - start the device
*
* This function calls BSP functions to connect interrupts and start the
* device running in interrupt mode.
*
* RETURNS: OK or ERROR
*
*/

LOCAL STATUS sndsEndStart
    (
    END_DEVICE *pDrvCtrl	/* device to be started */
    )
    {
#if 1 
	BDMARXCON bdmaRxCon;
#endif
	unsigned long i;
	MACRXCON macRxCon;


	/* init BDMARXCON register */
	*(UINT32 *) (&bdmaRxCon) = *(UINT32 *)SNDS_BDMARXCON;

	bdmaRxCon.rxCon_reg.recvFrameIntrEnb = 1;
	bdmaRxCon.rxCon_reg.nullListIntrEnb = 1;
           	bdmaRxCon.rxCon_reg.notOwnerIntrEnb = 1;
	bdmaRxCon.rxCon_reg.enable = 1 ;
	*(UINT32 *)SNDS_BDMARXCON = bdmaRxCon.rxCon_resetval;


	/* init MACRXCON register */
	*(UINT32 *)(&macRxCon) = *(UINT32 *)SNDS_MACRXCON;
	macRxCon.macRxCon_reg.receiveEnable = 1;
	*(UINT32 *)SNDS_MACRXCON = macRxCon.macRxCon_resetval;



	/* Connect BDMA and MAC TX and RX interrupts */ /*modified by knp/nts 27/9/99 */ 
													
	intConnect ((VOIDFUNCPTR *)INUM_TO_IVEC (pDrvCtrl->ivecBdmaTx), sndsEndBdmaTxInt, NULL);
	intConnect ((VOIDFUNCPTR *)INUM_TO_IVEC (pDrvCtrl->ivecBdmaRx), sndsEndBdmaRxInt, (UINT32) pDrvCtrl);
	intConnect ((VOIDFUNCPTR *)INUM_TO_IVEC (pDrvCtrl->ivecMacTx), sndsEndMacTxInt, (UINT32) pDrvCtrl);
	intConnect ((VOIDFUNCPTR *)INUM_TO_IVEC (pDrvCtrl->ivecMacRx), sndsEndMacRxInt, NULL);

	/* Enable all the four interrupts */ /*modified by knp/nts 27/9/9/99 */

	intEnable (pDrvCtrl->ivecBdmaTx);
	intEnable (pDrvCtrl->ivecBdmaRx);
	intEnable (pDrvCtrl->ivecMacTx);
	intEnable (pDrvCtrl->ivecMacRx);

	/* Set the flags to indicate that the device is up */
	END_FLAGS_SET (&pDrvCtrl->end, IFF_UP | IFF_RUNNING);

    return (OK);
    }


/****************************************************************************** 
* sndsEndBdmaTxInt - handle controller interrupt
*
* This routine is called at interrupt level in response to an interrupt from
* the BdmaTx controller.
*
* RETURNS: N/A.
*/

LOCAL void sndsEndBdmaTxInt
    (
    END_DEVICE  *pDrvCtrl	/* interrupting device */
    )
    {
	/**Nothing to be done here**/
    }

/*******************************************************************************
* sndsEndBdmaRxInt - handle controller interrupt
*
* This routine is called at interrupt level in response to an interrupt from
* the BdmaTx controller.
*
* RETURNS: N/A.
*/

LOCAL void sndsEndBdmaRxInt
    (
    END_DEVICE  *pDrvCtrl	/* interrupting device */
    )
    {
	BDMASTAT bdmaStat;

	bdmaStat.stat_resetval = *(UINT32 *)SNDS_BDMASTAT;
	*(UINT32 *)SNDS_BDMASTAT |= bdmaStat.stat_resetval;	/* Clear status bits */

    netJobAdd ((FUNCPTR)sndsEndHandleRcvInt, (int)pDrvCtrl, bdmaStat.stat_resetval,0,0,0);
    }
/*******************************************************************************
* sndsEndMacTxInt - handle controller interrupt
*
* This routine is called at interrupt level in response to an interrupt from
* the MacRx controller.
*
* RETURNS: N/A.
*/

LOCAL void sndsEndMacTxInt
    (
    END_DEVICE  *pDrvCtrl	/* interrupting device */
    )
    {
	TRANSMIT_FRAME_DESC *pTxDesc;

	*(UINT32 *)(&pTxDesc) = *(UINT32 *)(SNDS_BDMATXPTR);

	while (pTxDesc != gpTransmitFrameDescStart)
		{
		if (pTxDesc->txFrameData.o_bit)
			break;	/* Ownership is still with BDMA */
		if (pTxDesc->txStatusLength.comp)
			{
			pDrvCtrl->statistics.txGood++;
			}
		else	/* Update error statistics */
			{
			if (pTxDesc->txStatusLength.underRun)
				pDrvCtrl->statistics.txUnderErr++;
			if (pTxDesc->txStatusLength.exColl)
				pDrvCtrl->statistics.txExCollErr++;
			if (pTxDesc->txStatusLength.txDefer)
				pDrvCtrl->statistics.txDeferredErr++;
			if (pTxDesc->txStatusLength.paused)
				pDrvCtrl->statistics.txPaused++;
			if (pTxDesc->txStatusLength.deferAl)
				pDrvCtrl->statistics.txDeferErr++;
			if (pTxDesc->txStatusLength.ncArr)
				pDrvCtrl->statistics.txNCarrErr++;
			if (pTxDesc->txStatusLength.sqeErr)
				pDrvCtrl->statistics.txSQE++;
			if (pTxDesc->txStatusLength.lateColl)
				pDrvCtrl->statistics.txLateCollErr++;
			if (pTxDesc->txStatusLength.txPar)
				pDrvCtrl->statistics.txParErr++;
			if (pTxDesc->txStatusLength.txHalted)
				pDrvCtrl->statistics.txHalted++;
			}
		*(UINT32 *)(&pTxDesc->txStatusLength) = 0;	/* Clear status field */
		pTxDesc = pTxDesc->nextTxFrameDesc;
		}
    }

/*******************************************************************************
* sndsEndMacRxInt - handle controller interrupt
*
* This routine is called at interrupt level in response to an interrupt from
* the MacRx controller.
*
* RETURNS: N/A.
*/

LOCAL void sndsEndMacRxInt
    (
    END_DEVICE  *pDrvCtrl	/* interrupting device */
    )
    {
	/***Nothing to be done here***/
    }


/*******************************************************************************
*
* sndsEndHandleRcvInt - task level interrupt service for input packets
*
* This routine is called at task level indirectly by the interrupt
* service routine to do any message received processing.
*
* RETURNS: N/A.
*/

static int GoodCnt = 0;
LOCAL void sndsEndHandleRcvInt
    (
    END_DEVICE *pDrvCtrl,	/* interrupting device */
	UINT32 stat	/* receive status */
    )
    {
	BDMASTAT bdmaStat;
	BDMARXCON bdmaRxCon;
	RECEIVE_FRAME_DESC *pReceiveFrameDesc;
	UINT16 *	pFrameData;
	UINT32 frameLength;

	bdmaStat.stat_resetval = stat;
	*(UINT32 *)(&pReceiveFrameDesc) = *(UINT32 *)(SNDS_BDMARXPTR);
    *(UINT32 *)(&bdmaRxCon)=*(UINT32 *) (SNDS_BDMARXCON);

	if ((*(UINT32 *) (&gpReceiveFrameDescStart->rxStatusLength)) == 0)
		return;

	*(UINT32 *)SNDS_IOPDATA = 0xff ; 
/*