?? oemsetup.inf
字號:
;*******************************************************************************
;* **
;* I N T E L P R O P R I E T A R Y **
;* **
;* COPYRIGHT (c) 2000 BY INTEL CORPORATION. ALL RIGHTS RESERVED. NO **
;* PART OF THIS PROGRAM OR PUBLICATION MAY BE REPRODUCED, TRANSMITTED, **
;* TRANSCRIBED, STORED IN A RETRIEVAL SYSTEM, OR TRANSLATED INTO ANY **
;* LANGUAGE OR COMPUTER LANGUAGE IN ANY FORM OR BY ANY MEANS, ELECTRONIC, **
;* MECHANICAL, MAGNETIC, OPTICAL, CHEMICAL, MANUAL, OR OTHERWISE, WITHOUT **
;* THE PRIOR WRITTEN PERMISSION OF : **
;* **
;* INTEL CORPORATION **
;* **
;* 2200 MISSION COLLEGE BLVD **
;* **
;* SANTA CLARA, CALIFORNIA 95052-8119 **
;* **
;*******************************************************************************
;*******************************************************************************
; Windows NT OEMSETUP.INF for
;
; Intel(R) GD82559ER Fast Ethernet Adapter
;
;*******************************************************************************
; $Revision: 9 $
;*******************************************************************************
; Define Options
;*******************************************************************************
[Options]
E100E
[OptionsText]
E100E = "Intel(R) GD82559ER Fast Ethernet Adapter"
[Source Media Descriptions]
1 = "Intel(R) GD82559ER Fast Ethernet Adapter CD-ROM or floppy disk",+
TAGFILE = e100ent.sys
;*******************************************************************************
; Define customizable constants.
;*******************************************************************************
[FileConstants]
Manufacturer = "Intel"
NDIS4 = "e100ent.sys"
NDIS4Src = "e100ent.sys"
SoftwareName = "E100E"
SoftwareTitle = "Intel(R) GD82559ER Fast Ethernet Adapter"
SoftwareDescription = "Intel(R) GD82559ER Fast Ethernet Adapter Driver"
HardwareTitle = "Intel(R) GD82559ER Fast Ethernet Adapter"
HardwareDescription = "Intel(R) GD82559ER Fast Ethernet Adapter"
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
SoftwareImagePath = "%SystemRoot%\System32\drivers\"$(NDIS4)
SoftwareKeyName = "SOFTWARE\"$(Manufacturer)"\"$(SoftwareName)+
"\CurrentVersion"
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly "+
"installed. Are you sure you want to cancel "+
"copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
AutoDetect = "Auto Detect"
Speed10Mbps = "10 Mbps"
Speed100Mbps = "100 Mbps"
HalfDuplex = "Half-Duplex"
FullDuplex = "Full-Duplex"
SpeedList = {$(AutoDetect), $(Speed10Mbps), $(Speed100Mbps)}
DuplexList = {$(AutoDetect), $(HalfDuplex), $(FullDuplex)}
KeyNull = ""
;*******************************************************************************
; Define Vendor/Device IDs for support adapters. Each support adapter is listed
; in the format {<Vendor ID>, <Device ID>}.
;*******************************************************************************
[VendorDeviceIDs]
{32902, 4617} ; 0x8086, 0x1209
{32902, 4649} ; 0x8086, 0x1229
;*******************************************************************************
; Define miniport instance parameters. This list defines the name of the
; parameter, the registry data type, and the value of the parameter. Each
; parameter is specified in a format ready to be passed into SetRegValue():
; {<name>, $(NoTitle), <reg value type>, <parameter value>}.
;*******************************************************************************
[MiniportParameters]
; HKLM\SYSTEM\CurrentControlSet\Services\[miniport instance]\Parameters
{AutoPolarity, $(NoTitle), $(!REG_VT_DWORD), 2}
{BusNumber, $(NoTitle), $(!REG_VT_DWORD), $(BusNumber)}
{BusType, $(NoTitle), $(!REG_VT_DWORD), 5}
{BusTypeLocal, $(NoTitle), $(!REG_VT_DWORD), 5}
{Congest, $(NoTitle), $(!REG_VT_DWORD), 0}
{Coalesce, $(NoTitle), $(!REG_VT_DWORD), 0}
{Connector, $(NoTitle), $(!REG_VT_DWORD), 0}
{EQUOFF, $(NoTitle), $(!REG_VT_DWORD), 0}
{EnableSelfTest, $(NoTitle), $(!REG_VT_DWORD), 1}
{Environment, $(NoTitle), $(!REG_VT_DWORD), 0}
{ExtremeCacheAlignment, $(NoTitle), $(!REG_VT_DWORD), 0}
{ForceDpx, $(NoTitle), $(!REG_VT_DWORD), 0}
{MCWA, $(NoTitle), $(!REG_VT_DWORD), 2}
{MWIEnable, $(NoTitle), $(!REG_VT_DWORD), 1}
{MediaType, $(NoTitle), $(!REG_VT_DWORD), 1}
{NetworkAddress, $(NoTitle), $(!REG_VT_SZ), ""}
{NumCoalesce, $(NoTitle), $(!REG_VT_DWORD), 8}
{NumRfd, $(NoTitle), $(!REG_VT_DWORD), 16}
{NumTbdPerTcb, $(NoTitle), $(!REG_VT_DWORD), 1}
{NumTcb, $(NoTitle), $(!REG_VT_DWORD), 8}
{PhyAddress, $(NoTitle), $(!REG_VT_DWORD), 255}
{RxDmaCount, $(NoTitle), $(!REG_VT_DWORD), 0}
{RxFifo, $(NoTitle), $(!REG_VT_DWORD), 8}
{SlotNumber, $(NoTitle), $(!REG_VT_DWORD), $(SlotNumber)}
{Speed, $(NoTitle), $(!REG_VT_DWORD), 0}
{TxDmaCount, $(NoTitle), $(!REG_VT_DWORD), 0}
{TxFifo, $(NoTitle), $(!REG_VT_DWORD), 8}
{UnderrunRetry, $(NoTitle), $(!REG_VT_DWORD), 1}
{UseIo, $(NoTitle), $(!REG_VT_DWORD), 2}
{WaitAfterWin, $(NoTitle), $(!REG_VT_DWORD), 0}
;*******************************************************************************
; Define software and hardware component registry settings that are applied
; after calling AddSoftwareComponent() or AddHardwareComponent(). Each
; parameter is specified in a format ready to be passed into SetRegValue():
; {<name>, $(NoTitle), <reg value type>, <parameter value>}.
;*******************************************************************************
[SoftwareCurrentVersion]
; HKLM\SOFTWARE\[Mfg]\[Product]\CurrentVersion
{SoftwareType, $(NoTitle), $(!REG_VT_SZ), "driver"}
{MajorVersion, $(NoTitle), $(!REG_VT_DWORD), 3}
{MinorVersion, $(NoTitle), $(!REG_VT_DWORD), 0}
{Title, $(NoTitle), $(!REG_VT_SZ), $(SoftwareTitle)}
{Description, $(NoTitle), $(!REG_VT_SZ), $(SoftwareDescription)}
{ServiceName, $(NoTitle), $(!REG_VT_SZ), $(SoftwareName)}
{InstallDate, $(NoTitle), $(!REG_VT_DWORD), *($(Now),1)}
[SoftwareNetBindRules]
; HKLM\SOFTWARE\[Mfg]\[Product]\CurrentVersion\NetRules
{type, $(NoTitle), $(!REG_VT_SZ), +
$(SoftwareName)"Sys ndisDriver "$(SoftwareName)"Driver"}
{use, $(NoTitle), $(!REG_VT_SZ), +
"driver"}
{bindform, $(NoTitle), $(!REG_VT_SZ), +
""""$(SoftwareName)"Sys"" yes no container"}
{class, $(NoTitle), $(!REG_VT_MULTI_SZ), +
{$(SoftwareName)"Driver basic"}}
{bindable, $(NoTitle), $(!REG_VT_MULTI_SZ), +
{$(SoftwareName)"Driver "$(SoftwareName)+
"Adapter non exclusive 100"}}
{InfOption, $(NoTitle), $(!REG_VT_SZ), +
$(Option)}
[NetworkCardValues]
; HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\[x]
{Manufacturer, $(NoTitle), $(!REG_VT_SZ), +
$(Manufacturer)}
{Title, $(NoTitle), $(!REG_VT_SZ), +
"["$(AdapterNumber)"] "$(HardwareTitle)}
{Description, $(NoTitle), $(!REG_VT_SZ), +
$(HardwareDescription)}
{ProductName, $(NoTitle), $(!REG_VT_SZ), +
$(SoftwareName)}
{ServiceName, $(NoTitle), $(!REG_VT_SZ), +
$(SoftwareName)$(AdapterNumber)}
{InstallDate, $(NoTitle), $(!REG_VT_DWORD), +
*($(Now),1)}
{OperationsSupport, $(NoTitle), $(!REG_VT_DWORD), +
255}
[HardwareNetBindRules]
; HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\[x]\NetRules
{type, $(NoTitle), $(!REG_VT_SZ), +
$(SoftwareName)" "$(SoftwareName)"Adapter"}
{bindform, $(NoTitle), $(!REG_VT_SZ), +
""""$(SoftwareName)$(AdapterNumber)""" yes yes container"}
{class, $(NoTitle), $(!REG_VT_MULTI_SZ), +
{$(SoftwareName)"Adapter basic"}}
{InfOption, $(NoTitle), $(!REG_VT_SZ), +
$(Option)}
;*******************************************************************************
; Detect sections. These sections are called using the detect command.
;*******************************************************************************
[Date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
;*******************************************************************************
; Returns information to Setup about the type of driver or drivers that
; can be installed by this INF file.
;*******************************************************************************
[Identify]
Return STATUS_SUCCESSFUL NetAdapter ""
;*******************************************************************************
; This section returns information to the Setup program, listing the
; names of any drivers that can be installed by this INF file. It also
; returns the text strings for each driver (in the requested language)
; to be used in the dialog box that asks the user to select the driver
; to install.
;*******************************************************************************
[ReturnOptions]
Set Status = STATUS_SUCCESSFUL
Set OptionList = ^(Options, 1)
Set OptionTextList = ^(OptionsText, 1)
IfStr(i) $($1) != ""
IfContains(i) $($1) not-in "PCI"
Set Status = STATUS_NOTSUPPORTED
Set OptionList = {}
Set OptionTextList = {}
EndIf
EndIf
Return $(Status) $(OptionList) $(OptionTextList)
;*******************************************************************************
; If the [ReturnOptions] section returns successfully, indicating the
; language is supported, Setup displays a dialog box from which the user
; can select a driver to install. If the user proceeds with the
; installation, Setup calls the [InstallOption] section.
;*******************************************************************************
[InstallOption]
Set Option = $($1)
Set SrcDir = $($2)
Set AddCopy = $($3)
Set DoCopy = $($4)
Set DoConfig = $($5)
read-syms FileConstants
detect Date
;-----------------------------------------------------------------------
; Switch on the install mode option and goto the appropriate sub.
;-----------------------------------------------------------------------
IfStr(i) $(!NTN_InstallMode) == deinstall
Set StartLabel = RemoveAdapter
Else-IfStr(i) $(!NTN_InstallMode) == update
Set StartLabel = UpdateAdapter
Else-IfStr(i) $(!NTN_InstallMode) == bind
return STATUS_USERCANCEL
Else-IfStr(i) $(!NTN_InstallMode) == configure
Set StartLabel = ConfigureAdapter
Else-IfStr(i) $(!NTN_InstallMode) == install
Set StartLabel = InstallAdapters
EndIf
Set from = FatalError
Set to = FatalError
Goto $(StartLabel)
;*******************************************************************************
; Called when the user clicks the Add button in the NCPA.
;*******************************************************************************
InstallAdapters = +
;-----------------------------------------------------------------------
; NT 3.50 & 3.51 are not supported, so give user the bad news
;-----------------------------------------------------------------------
OpenRegKey $(!REG_H_LOCAL) "" +
"SOFTWARE\Microsoft\Windows NT\CurrentVersion" +
$(!REG_KEY_READ) hKeyWinNT
GetRegValue $(hKeyWinNT) "CurrentVersion" CurrentVersion
Set WinNTVersion = *($(CurrentVersion), 4)
CloseRegKey $(hKeyWinNT)
ifcontains(i) $(WinNTVersion) in {"3.50", "3.51"}
Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "STATUS" +
"NT 3.50 and NT 3.51 are not supported."
return STATUS_USERCANCEL
EndIf
;-----------------------------------------------------------------------
; Find Adapter(s) by doing a PCI scan (of registry) with Utility.inf.
; The bus/slot/function of each adapter found are returned in a list
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -