/* *  linux/arch/i386/entry.S * *  Copyright (C) 1991, 1992  Linus Torvalds *//* * entry.S contains the system-call and fault low-level handling routines. * This also contains the timer-interrupt handler, as well as all interrupts * and faults that can result in a task-switch. * * NOTE: This code handles signal-recognition, which happens every time * after a timer-interrupt and after each system call. * * I changed all the .align's to 4 (16 byte alignment), as that's faster * on a 486. * * Stack layout in 'ret_from_system_call': * 	ptrace needs to have all regs on the stack. *	if the order here is changed, it needs to be *	updated in fork.c:copy_process, signal.c:do_signal, *	ptrace.c and ptrace.h * *	 0(%esp) - %ebx *	 4(%esp) - %ecx *	 8(%esp) - %edx *       C(%esp) - %esi *	10(%esp) - %edi *	14(%esp) - %ebp *	18(%esp) - %eax *	1C(%esp) - %ds *	20(%esp) - %es *	24(%esp) - orig_eax *	28(%esp) - %eip *	2C(%esp) - %cs *	30(%esp) - %eflags *	34(%esp) - %oldesp *	38(%esp) - %oldss * * "current" is in register %ebx during any slow entries. */#include <linux/config.h>#include <linux/sys.h>#include <linux/linkage.h>#include <asm/segment.h>#include <asm/smp.h>EBX		= 0x00ECX		= 0x04EDX		= 0x08ESI		= 0x0CEDI		= 0x10EBP		= 0x14EAX		= 0x18DS		= 0x1CES		= 0x20ORIG_EAX	= 0x24EIP		= 0x28CS		= 0x2CEFLAGS		= 0x30OLDESP		= 0x34OLDSS		= 0x38CF_MASK		= 0x00000001IF_MASK		= 0x00000200NT_MASK		= 0x00004000VM_MASK		= 0x00020000/* * these are offsets into the task-struct. */state		=  0flags		=  4sigpending	=  8addr_limit	= 12exec_domain	= 16need_resched	= 20tsk_ptrace	= 24processor	= 52ENOSYS = 38#define SAVE_ALL \	cld; \	pushl %es; \	pushl %ds; \	pushl %eax; \	pushl %ebp; \	pushl %edi; \	pushl %esi; \	pushl %edx; \	pushl %ecx; \	pushl %ebx; \	movl $(__KERNEL_DS),%edx; \	movl %edx,%ds; \	movl %edx,%es;#define RESTORE_ALL	\	popl %ebx;	\	popl %ecx;	\	popl %edx;	\	popl %esi;	\	popl %edi;	\	popl %ebp;	\	popl %eax;	\1:	popl %ds;	\2:	popl %es;	\	addl $4,%esp;	\3:	iret;		\.section .fixup,"ax";	\4:	movl $0,(%esp);	\	jmp 1b;		\5:	movl $0,(%esp);	\	jmp 2b;		\6:	pushl %ss;	\	popl %ds;	\	pushl %ss;	\	popl %es;	\	pushl $11;	\	call do_exit;	\.previous;		\.section __ex_table,"a";\	.align 4;	\	.long 1b,4b;	\	.long 2b,5b;	\	.long 3b,6b;	\.previous#define GET_CURRENT(reg) \	movl $-8192, reg; \	andl %esp, regENTRY(lcall7)	pushfl			# We get a different stack layout with call gates,	pushl %eax		# which has to be cleaned up later..	SAVE_ALL	movl EIP(%esp),%eax	# due to call gates, this is eflags, not eip..	movl CS(%esp),%edx	# this is eip..	movl EFLAGS(%esp),%ecx	# and this is cs..	movl %eax,EFLAGS(%esp)	#	movl %edx,EIP(%esp)	# Now we move them to their "normal" places	movl %ecx,CS(%esp)	#	movl %esp,%ebx	pushl %ebx	andl $-8192,%ebx	# GET_CURRENT	movl exec_domain(%ebx),%edx	# Get the execution domain	movl 4(%edx),%edx	# Get the lcall7 handler for the domain	pushl $0x7	call *%edx	addl $4, %esp	popl %eax	jmp ret_from_sys_callENTRY(lcall27)	pushfl			# We get a different stack layout with call gates,	pushl %eax		# which has to be cleaned up later..	SAVE_ALL	movl EIP(%esp),%eax	# due to call gates, this is eflags, not eip..	movl CS(%esp),%edx	# this is eip..	movl EFLAGS(%esp),%ecx	# and this is cs..	movl %eax,EFLAGS(%esp)	#	movl %edx,EIP(%esp)	# Now we move them to their "normal" places	movl %ecx,CS(%esp)	#	movl %esp,%ebx	pushl %ebx	andl $-8192,%ebx	# GET_CURRENT	movl exec_domain(%ebx),%edx	# Get the execution domain	movl 4(%edx),%edx	# Get the lcall7 handler for the domain	pushl $0x27	call *%edx	addl $4, %esp	popl %eax	jmp ret_from_sys_callENTRY(ret_from_fork)	pushl %ebx	call SYMBOL_NAME(schedule_tail)	addl $4, %esp	GET_CURRENT(%ebx)	testb $0x02,tsk_ptrace(%ebx)	# PT_TRACESYS	jne tracesys_exit	jmp	ret_from_sys_call/* * Return to user mode is not as complex as all this looks, * but we want the default path for a system call return to * go as quickly as possible which is why some of this is * less clear than it otherwise should be. */ENTRY(system_call)	pushl %eax			# save orig_eax	SAVE_ALL	GET_CURRENT(%ebx)	testb $0x02,tsk_ptrace(%ebx)	# PT_TRACESYS	jne tracesys	cmpl $(NR_syscalls),%eax	jae badsys	call *SYMBOL_NAME(sys_call_table)(,%eax,4)	movl %eax,EAX(%esp)		# save the return valueENTRY(ret_from_sys_call)	cli				# need_resched and signals atomic test	cmpl $0,need_resched(%ebx)	jne reschedule	cmpl $0,sigpending(%ebx)	jne signal_returnrestore_all:	RESTORE_ALL	ALIGNsignal_return:	sti				# we can get here from an interrupt handler	testl $(VM_MASK),EFLAGS(%esp)	movl %esp,%eax	jne v86_signal_return	xorl %edx,%edx	call SYMBOL_NAME(do_signal)	jmp restore_all	ALIGNv86_signal_return:	call SYMBOL_NAME(save_v86_state)	movl %eax,%esp	xorl %edx,%edx	call SYMBOL_NAME(do_signal)	jmp restore_all	ALIGNtracesys:	movl $-ENOSYS,EAX(%esp)	call SYMBOL_NAME(syscall_trace)	movl ORIG_EAX(%esp),%eax	cmpl $(NR_syscalls),%eax	jae tracesys_exit	call *SYMBOL_NAME(sys_call_table)(,%eax,4)	movl %eax,EAX(%esp)		# save the return valuetracesys_exit:	call SYMBOL_NAME(syscall_trace)	jmp ret_from_sys_callbadsys:	movl $-ENOSYS,EAX(%esp)	jmp ret_from_sys_call	ALIGNENTRY(ret_from_intr)	GET_CURRENT(%ebx)ret_from_exception:	movl EFLAGS(%esp),%eax		# mix EFLAGS and CS	movb CS(%esp),%al	testl $(VM_MASK | 3),%eax	# return to VM86 mode or non-supervisor?	jne ret_from_sys_call	jmp restore_all	ALIGNreschedule:	call SYMBOL_NAME(schedule)    # test	jmp ret_from_sys_callENTRY(divide_error)	pushl $0		# no error code	pushl $ SYMBOL_NAME(do_divide_error)	ALIGNerror_code:	pushl %ds	pushl %eax	xorl %eax,%eax	pushl %ebp	pushl %edi	pushl %esi	pushl %edx	decl %eax			# eax = -1	pushl %ecx	pushl %ebx	cld	movl %es,%ecx	movl ORIG_EAX(%esp), %esi	# get the error code	movl ES(%esp), %edi		# get the function address	movl %eax, ORIG_EAX(%esp)	movl %ecx, ES(%esp)	movl %esp,%edx	pushl %esi			# push the error code	pushl %edx			# push the pt_regs pointer	movl $(__KERNEL_DS),%edx	movl %edx,%ds	movl %edx,%es	GET_CURRENT(%ebx)	call *%edi	addl $8,%esp	jmp ret_from_exceptionENTRY(coprocessor_error)	pushl $0	pushl $ SYMBOL_NAME(do_coprocessor_error)	jmp error_codeENTRY(simd_coprocessor_error)	pushl $0	pushl $ SYMBOL_NAME(do_simd_coprocessor_error)	jmp error_codeENTRY(device_not_available)	pushl $-1		# mark this as an int	SAVE_ALL	GET_CURRENT(%ebx)	movl %cr0,%eax	testl $0x4,%eax			# EM (math emulation bit)	jne device_not_available_emulate	call SYMBOL_NAME(math_state_restore)	jmp ret_from_exceptiondevice_not_available_emulate:	pushl $0		# temporary storage for ORIG_EIP	call  SYMBOL_NAME(math_emulate)	addl $4,%esp	jmp ret_from_exceptionENTRY(debug)	pushl $0	pushl $ SYMBOL_NAME(do_debug)	jmp error_code