# drivers/mtd/maps/Config.in# $Id: Config.in,v 1.28 2002/03/08 16:34:35 rkaiser Exp $mainmenu_option next_commentcomment 'Mapping drivers for chip access'dep_tristate '  CFI Flash device in physical memory map' CONFIG_MTD_PHYSMAP $CONFIG_MTD_GEN_PROBEif [ "$CONFIG_MTD_PHYSMAP" = "y" -o "$CONFIG_MTD_PHYSMAP" = "m" ]; then   hex '    Physical start address of flash mapping' CONFIG_MTD_PHYSMAP_START 0x8000000   hex '    Physical length of flash mapping' CONFIG_MTD_PHYSMAP_LEN 0x4000000   int '    Bus width in octets' CONFIG_MTD_PHYSMAP_BUSWIDTH 2fidep_tristate '  CFI Flash device mapped on Dragonix VZ' CONFIG_MTD_DRAGONIX $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_CFI_AMDSTD $CONFIG_MTD_PARTITIONSdep_tristate '  CFI Flash device mapped on SnapGear/SecureEdge' CONFIG_MTD_NETtel $CONFIG_MTD_PARTITIONSdep_tristate '  CFI Flash device mapped on SnapGear/SecureEdge (uClinux)' CONFIG_MTD_NETteluC $CONFIG_UCLINUX $CONFIG_MTD_PARTITIONSif [ "$CONFIG_MTD_NETteluC" = "y" ]; then   choice '  FLASH size' \           " AUTO  CONFIG_FLASHAUTO \            128KB  CONFIG_FLASH128KB \              1MB  CONFIG_FLASH1MB \              2MB  CONFIG_FLASH2MB \              4MB  CONFIG_FLASH4MB \              6MB  CONFIG_FLASH6MB \              8MB  CONFIG_FLASH8MB \             16MB  CONFIG_FLASH16MB" AUTOfidep_tristate '  CFI Flash device mapped on Key Technology devices' CONFIG_MTD_KeyTechnology $CONFIG_UCLINUX $CONFIG_MTD_PARTITIONSif [ "$CONFIG_SPARC" = "y" -o "$CONFIG_SPARC64" = "y" ]; then   dep_tristate '  Sun Microsystems userflash support' CONFIG_MTD_SUN_UFLASH $CONFIG_MTD_CFIfiif [ "$CONFIG_X86" = "y" ]; then   dep_tristate '  CFI Flash device mapped on Photron PNC-2000' CONFIG_MTD_PNC2000 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS   dep_tristate '  CFI Flash device mapped on AMD SC520 CDP' CONFIG_MTD_SC520CDP $CONFIG_MTD_CFI   dep_tristate '  CFI Flash device mapped on AMD NetSc520'  CONFIG_MTD_NETSC520 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS   dep_tristate '  CFI Flash device mapped on Arcom SBC-GXx boards' CONFIG_MTD_SBC_GXX $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS   dep_tristate '  CFI Flash device mapped on Arcom ELAN-104NC' CONFIG_MTD_ELAN_104NC $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS   dep_tristate '  CFI Flash device mapped on DIL/Net PC' CONFIG_MTD_DILNETPC $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS $CONFIG_MTD_CONCAT   if [ "$CONFIG_MTD_DILNETPC" = "y" -o "$CONFIG_MTD_DILNETPC" = "m" ]; then     hex '    Size of boot partition' CONFIG_MTD_DILNETPC_BOOTSIZE 0x80000   fi   dep_tristate '  JEDEC Flash device mapped on Mixcom piggyback card' CONFIG_MTD_MIXMEM $CONFIG_MTD_JEDEC   dep_tristate '  JEDEC Flash device mapped on Octagon 5066 SBC' CONFIG_MTD_OCTAGON $CONFIG_MTD_JEDEC   dep_tristate '  JEDEC Flash device mapped on Tempustech VMAX SBC301' CONFIG_MTD_VMAX $CONFIG_MTD_JEDEC   dep_tristate '  BIOS flash chip on Intel L440GX boards' CONFIG_MTD_L440GX $CONFIG_MTD_JEDECPROBE   dep_tristate ' ROM connected to AMD766 southbridge' CONFIG_MTD_AMD766ROM $CONFIG_MTD_GEN_PROBE      dep_tristate ' ROM connected to Intel Hub Controller 2' CONFIG_MTD_ICH2ROM $CONFIG_MTD_JEDECPROBEfiif [ "$CONFIG_PPC" = "y" ]; then   dep_tristate '  CFI Flash device mapped on TQM8XXL' CONFIG_MTD_TQM8XXL $CONFIG_MTD_CFI $CONFIG_TQM8xxL   dep_tristate '  CFI Flash device mapped on RPX Lite or CLLF' CONFIG_MTD_RPXLITE $CONFIG_MTD_CFI   dep_tristate '  System flash on MBX860 board' CONFIG_MTD_MBX860 $CONFIG_MTD_CFI   dep_tristate '  CFI Flash device mapped on D-Box2' CONFIG_MTD_DBOX2 $CONFIG_MTD_CFI   dep_tristate '  CFI Flash device mapping on FlagaDM' CONFIG_MTD_CFI_FLAGADM $CONFIG_MTD_CFIfiif [ "$CONFIG_MIPS" = "y" ]; then   dep_tristate '  Pb1000 boot flash device' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000   dep_tristate '  Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500   if [ "$CONFIG_MTD_PB1500" = "y" -o "$CONFIG_MTD_PB1500" = "m" ]; then      bool '  Pb1500 boot flash device' CONFIG_MTD_PB1500_BOOT       bool '  Pb1500 user flash device (2nd 32MB bank)' CONFIG_MTD_PB1500_USER   fi   dep_tristate '  Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS    if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then      hex '    Physical start address of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_START 0x8000000      hex '    Physical length of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_LEN 0x4000000      int '    Bus width in octets' CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH 2   fi   dep_tristate '  Momenco Ocelot boot flash device' CONFIG_MTD_OCELOT $CONFIG_MOMENCO_OCELOTfiif [ "$CONFIG_SUPERH" = "y" ]; then   dep_tristate '  CFI Flash device mapped on Hitachi SolutionEngine' \      CONFIG_MTD_SOLUTIONENGINE $CONFIG_MTD_PARTITIONS $CONFIG_MTD_CFI   if [ "$CONFIG_MTD_SOLUTIONENGINE" != "n" ]; then      hex '  Default reserved Flash size'  CONFIG_MTD_SUPERH_RESERVE 0x00010000   fifiif [ "$CONFIG_ARM" = "y" ]; then   dep_tristate '  CFI Flash device mapped on Nora' CONFIG_MTD_NORA $CONFIG_MTD_CFI   dep_tristate '  CFI Flash device mapped on ARM Integrator/P720T' CONFIG_MTD_ARM_INTEGRATOR $CONFIG_MTD_CFI   dep_tristate '  Cirrus CDB89712 evaluation board mappings' CONFIG_MTD_CDB89712 $CONFIG_MTD_CFI $CONFIG_ARCH_CDB89712   dep_tristate '  CFI Flash device mapped on StrongARM SA11x0' CONFIG_MTD_SA1100 $CONFIG_MTD_CFI $CONFIG_ARCH_SA1100 $CONFIG_MTD_PARTITIONS   dep_tristate '  CFI Flash device mapped on DC21285 Footbridge' CONFIG_MTD_DC21285 $CONFIG_MTD_CFI $CONFIG_ARCH_FOOTBRIDGE $CONFIG_MTD_PARTITIONS   dep_tristate '  CFI Flash device mapped on the XScale IQ80310 board' CONFIG_MTD_IQ80310 $CONFIG_MTD_CFI $CONFIG_ARCH_IQ80310   dep_tristate '  CFI Flash device mapped on Epxa10db' CONFIG_MTD_EPXA10DB $CONFIG_MTD_CFI  $CONFIG_MTD_PARTITIONS $CONFIG_ARCH_CAMELOT   dep_tristate '  CFI Flash device mapped on MBA-44B0' CONFIG_MTD_MBA44B0 $CONFIG_MTD_PARTITIONS $CONFIG_ARCH_S3C44B0   dep_tristate '  NV-RAM mapping AUTCPU12 board' CONFIG_MTD_AUTCPU12 $CONFIG_ARCH_AUTCPU12fiif [ "$CONFIG_M5272" = "y" -a "$CONFIG_senTec" = "y" ]; then	dep_tristate '  CFI Flash device mapped on COBRA5272' CONFIG_MTD_COBRA5272 $CONFIG_MTD_CFIfiif [ "$CONFIG_ALPHA" = "y" ]; then   dep_tristate '  Flash chip mapping on TSUNAMI' CONFIG_MTD_TSUNAMI $CONFIG_MTD_GENPROBEfi# This needs CFI or JEDEC, depending on the cards found.dep_tristate '  PCI MTD driver' CONFIG_MTD_PCI $CONFIG_MTD $CONFIG_PCIif [ "$CONFIG_M5272C3" ]; then   dep_tristate '  CFI Flash device mapped on Motorola M5272C3' CONFIG_MTD_M5272C3 $CONFIG_MTD_CFIfiendmenu