;
; Copyright (c) Microsoft Corporation.  All rights reserved.
;
;
; Use of this source code is subject to the terms of the Microsoft end-user
; license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
; If you did not accept the terms of the EULA, you are not authorized to use
; this source code. For a copy of the EULA, please see the LICENSE.RTF on your
; install media.
;

; Our variables
#define BUILTIN_ROOT HKEY_LOCAL_MACHINE\Drivers\BuiltIn
#define DRIVERS_DIR $(_PUBLICROOT)\common\oak\drivers


; @CESYSGEN IF WCESHELLFE_MODULES_CTLPNL
; This registry setting controls the checkboxes displayed in the Sounds CPL
; under "enable clicks & taps". Set bit0 if you have a keyboard, set bit1 if
; you have a touch screen. Set bit2 if you have HW buttons (NOTE: for now
; HW buttons are mutually exclusive with the keyboard)
[HKEY_LOCAL_MACHINE\ControlPanel]
    "InputConfig"=dword:3   ; 3 => keybd and touch screen
; @CESYSGEN ENDIF WCESHELLFE_MODULES_CTLPNL

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
    "DriverName"="touch.dll"
    "MaxCalError"=dword:7

; @CESYSGEN IF WCESHELLFE_MODULES_EXPLORER
; This registry setting controls display of the Explorer's suspend menu button
[HKEY_LOCAL_MACHINE\Explorer]
    "Suspend"=dword:1
    
; Disable Suspend
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power]
	"BattPowerOff"=dword:0
	"ExtPowerOff"=dword:0
	"WakeupPowerOff"=dword:0
	"ScreenPowerOff"=dword:0
; @CESYSGEN ENDIF WCESHELLFE_MODULES_EXPLORER


; @CESYSGEN IF CE_MODULES_DEVICE

; HIVE BOOT SECTION
[HKEY_LOCAL_MACHINE\Drivers\Resources\IRQ]
   "Identifier"=dword:1
   "Minimum"=dword:1
   "Space"=dword:20
   "Ranges"="1-0x20"
;  "Shared"=""

[HKEY_LOCAL_MACHINE\Drivers\Resources\IO]
   "Identifier"=dword:2
   "Minimum"=dword:0
   "Space"=dword:10000
   "Ranges"="0-0xFFFF"
; END HIVE BOOT SECTION


; @CESYSGEN IF CE_MODULES_BATTDRVR
#include "$(DRIVERS_DIR)\battdrvr\battdrvr.reg"
; @CESYSGEN ENDIF CE_MODULES_BATTDRVR

; @CESYSGEN IF CE_MODULES_NLEDDRVR
#include "$(DRIVERS_DIR)\nleddrvr\nleddrvr.reg"
; @CESYSGEN ENDIF CE_MODULES_NLEDDRVR

; @CESYSGEN IF CE_MODULES_POINTER   
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
  "MaxCalError"=dword:7
; portrait 
;  "CalibrationData"="500,512 762,268 758,760 244,758 241,266 "
; Landscape 
;   "CalibrationData"="515,503 763,748 258,749 269,255 764,255 "
; @CESYSGEN ENDIF CE_MODULES_POINTER   

; @CESYSGEN IF CE_MODULES_SERIAL
;=============== UART0 (physical COM1 connector P1) (Serial) ===============
IF BSP_NOSERIAL !
#include "$(_TARGETPLATROOT)\src\drivers\serial\ser_smdk2410.reg"
ENDIF BSP_NOSERIAL !
;=========== End of UART(Serial) ===============
; @CESYSGEN ENDIF CE_MODULES_SERIAL

; @CESYSGEN IF CE_MODULES_KEYBD
; Keybd driver is the same.
IF BSP_NOKEYBD !
#include "$(DRIVERS_DIR)\keybd\keybd.reg"

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
    "DriverName"="kbdmouse.dll"
    "Irq"=dword:1
    "IOBase"=dword:B1600000
    "SSPBase"=dword:B1900000

#include "$(DRIVERS_DIR)\keybd\LayMgr.reg"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\$(input_locale)]
	"Matrix"="kbdmouse.dll"


; @CESYSGEN IF CE_MODULES_KBDA1
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000401]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDA1

; @CESYSGEN IF CE_MODULES_KBDHEB
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\0000040D]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDHEB

; @CESYSGEN IF CE_MODULES_KBDTH0
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\0000041E]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDTH0

; @CESYSGEN IF CE_MODULES_KBDINHIN
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00010439]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINHIN

; @CESYSGEN IF CE_MODULES_KBDINMAR
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\0000044E]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINMAR

; @CESYSGEN IF CE_MODULES_KBDINPUN
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000446]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINPUN

; @CESYSGEN IF CE_MODULES_KBDINTEL
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\0000044A]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINTEL

; @CESYSGEN IF CE_MODULES_KBDINGUJ
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000447]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINGUJ

; @CESYSGEN IF CE_MODULES_KBDINKAN
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\0000044B]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINKAN

; @CESYSGEN IF CE_MODULES_KBDINTAM
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000449]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDINTAM

; @CESYSGEN IF CE_MODULES_KBDDV
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00010409]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDDV

; @CESYSGEN IF CE_MODULES_KBDUS
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000409]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDUS

; @CESYSGEN IF CE_MODULES_KBDJPN
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000411]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDJPN

; @CESYSGEN IF CE_MODULES_KBDKOR
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\00000412]
	"Matrix"="kbdmouse.dll"
; @CESYSGEN ENDIF CE_MODULES_KBDKOR


ENDIF BSP_NOKEYBD !
; @CESYSGEN ENDIF CE_MODULES_KEYBD


; @CESYSGEN IF CE_MODULES_PCCARD
IF BSP_NOPCCARD !
#include "$(_TARGETPLATROOT)\src\drivers\pccard\pcc_smdk2410.reg"
#include "$(DRIVERS_DIR)\pccard\mdd\pcc_serv.reg"
[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA]
   "Dll"="pcmcia.dll"
   "NoConfig"=dword:1
   "NoISR"=dword:1 ; Do not load any ISR.
   "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA Card Services"
ENDIF BSP_NOPCCARD !
; @CESYSGEN ENDIF CE_MODULES_PCCARD

; @CESYSGEN IF CE_MODULES_SDBUS
IF BSP_SDHC_SC2410

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC_SMDK2410]
    "Order"=dword:21
    "Dll"="sdhc_sc2410.dll"
    "Prefix"="SDH"
    
    "DMAChannel"=dword:0            ; DMA channel to use.  Set to 0xffffffff to disable DMA
    "DMAIrq"=dword:11
    "DMA_IST_Priority"=dword:96

    "SDIOIrq"=dword:15
    "SDIO_IST_Priority"=dword:97
    
    "PollingTimeout"=dword:100      ; 100 ms
    "CardDetect_Thread_Priority"=dword:98
    
    "CardDetectGPIO"="G"            ; card detect on GPG10
    "CardDetectMask"=dword:400
    "CardDetectFlag"=dword:0
    "CardDetectControlMask"=dword:fffcffff
    "CardDetectControlFlag"=dword:0
    "CardDetectPullupMask"=dword:ffffffef
    "CardDetectPullupFlag"=dword:10
    
    "CardReadWriteGPIO"="H"         ; card R/W on GPH8
    "CardReadWriteMask"=dword:100
    "CardReadWriteFlag"=dword:100
    "CardReadWriteControlMask"=dword:ffcfffff
    "CardReadWriteControlFlag"=dword:0
    "CardReadWritePullupMask"=dword:ffffffbf
    "CardReadWritePullupFlag"=dword:40

    "HandleBusyFinishOnCommand38"=dword:1
    "DmaTransferTimeoutFactor"=dword:8
    "DmaTransferTimeoutConstant"=dword:3000

ENDIF BSP_SDHC_SC2410
; @CESYSGEN ENDIF CE_MODULES_SDBUS

;=======================================================================
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDMMCLoader]
    "Dll"="SDMMCLoader.dll"
    "Prefix"="SML"
    "Index"=dword:0
    "Order"=dword:0

IF BSP_NOPWRBTN !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PBUT2410]
    "Dll"="pwrbtn2410.dll"
    "Prefix"="DSK"
    "Index"=dword:2
    "Order"=dword:2
    "Ioctl"=dword:4
    "FSD"= "fatfs.dll"
ENDIF BSP_NOPWRBTN !


IF BSP_NOAUDIO !
; @CESYSGEN IF CE_MODULES_WAVEAPI
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio]
   "Prefix"="WAV"
   "Dll"="s3c2410x_wavedev.dll"
   "Index"=dword:1
   "Order"=dword:0
   ; publish mixer interface
   "IClass"=multi_sz:"{37168569-61C4-45fd-BD54-9442C7DBA46F}"
   
; @CESYSGEN ENDIF CE_MODULES_WAVEAPI
ENDIF BSP_NOAUDIO !


;================= USB =================
; @CESYSGEN IF CE_MODULES_USBD
IF BSP_NOUSB !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\OHCI]
   "InterfaceType"=dword:0     ; Internal
   "Prefix"="HCD"
   "Dll"="ohci2.dll"
   "Index"=dword:1
   "Order"=dword:1
   "Irq"=dword:1a		; 26
   "SysIntr"=dword:11		; (SYSINTR_FIRMWARE+1)
   "MemBase"=dword:49000000
   "MemLen"=dword:1000
   "UseExistingSettings"=dword:0
ENDIF

;============= End of USB =================
; @CESYSGEN ENDIF CE_MODULES_USBD

; @CESYSGEN IF CE_MODULES_USBFN
IF BSP_NOUSBFN !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SC2410USBFN]
   "Dll"="sc2410usbfn.dll"
   "Prefix"="UFN"
   "Priority256"=dword:64
   "IoBase"=dword:B1200000
   "IoLen"=dword:1000        ; Use one page
   "Irq"=dword:19
   "BusIoctl"=dword:2a0048
   "IClass"=multi_sz:"{E2BDC372-598F-4619-BC50-54B3F7848D35}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b"
ENDIF BSP_NOUSBFN !
; @CESYSGEN ENDIF CE_MODULES_USBFN

[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Serial_Class]
   "FriendlyName"="SC2410 USB Cable:"
   "Index"=dword:9
   "Order"=dword:2
   "DevConfig"=hex: 10,00,00,00,05,00,00,00,00,01,00,00,00,4B,00,00,00,00,08,00,00,00,00,00,00


; @CESYSGEN ENDIF CE_MODULES_DEVICE



; @CESYSGEN IF FILESYS_FSREGHIVE
; HIVE BOOT SECTION

; Valid Bits for Flags registry value
; If no flags are set, the hive will be stored in the object store.
;
; 0x00000001    Start storage manager in boot phase 1 for hive-based registry
; 0x00000002    Start device manager in boot phase 1 for hive-based registry
; 0x00000004    Start storage manager in boot phase 1 for registry in
;               external ROM (such as BINFS)
; 0x00000008    Start device manager in boot phase 1 for registry in
;               external ROM (such as BINFS)

[HKEY_LOCAL_MACHINE\init\BootVars]
   "SystemHive"="Documents and Settings\\system.hv"
   "ProfileDir"="Documents and Settings"
   "Flags"=dword:3
; END HIVE BOOT SECTION
; @CESYSGEN ENDIF FILESYS_FSREGHIVE


; @CESYSGEN IF FILESYS_FSREGHIVE
; HIVE BOOT SECTION
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\FlashDisk]
    "Profile"="FlashDisk"
    "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
    "Order"=dword:0
    "FriendlyName"="ZLG_FFS NAND Flash Driver"
    "Dll"="flashdisk.dll"
    "Prefix"="DSK"

[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\FlashDisk]
    "DriverPath"="Drivers\\BuiltIn\\FlashDisk"
   ; LoadFlags 0x01 == load synchronously
    "LoadFlags"=dword:1
    "Order"=dword:0
    "BootPhase"=dword:0

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk]
    "DefaultFileSystem"="FATFS"
    "PartitionDriver"="mspart.dll"
    ;"MountAsROM"=dword:1
    ;"MountAsHidden"=dword:1
    "Folder"="Flash Disk"
    "Name"="FLASH Disk Block Device"

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS]
    "MountFlags"=dword:2
; END HIVE BOOT SECTION
; @CESYSGEN ENDIF FILESYS_FSREGHIVE


; @CESYSGEN IF CE_MODULES_DISPLAY
IF BSP_NODISPLAY !
[HKEY_LOCAL_MACHINE\Drivers\Display\S3C2410\CONFIG]
	"DisplayDll"="s3c2410x_lcd.dll"
	"LCDVirtualFrameBase"=dword:ac100000
	"LCDPhysicalFrameBase"=dword:30100000

[HKEY_LOCAL_MACHINE\System\GDI\Drivers]
    "Display"="s3c2410x_lcd.dll"

; S2410 IrDA(UART2)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IRDA2410]
   "DeviceArrayIndex"=dword:1
   "Irq"=dword:09
   "IoBase"=dword:50008000
   "IoLen"=dword:2C
   "Prefix"="COM"
   "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}"
   "Dll"="IRDA2410.Dll"
   "Order"=dword:0
   "Priority"=dword:0
   "Port"="COM3:"
   "DeviceType"=dword:0  ; IRDA modem, 0 -> null modem
   "FriendlyName"="S2410 IRDA2410"
;   "Index"=dword:2

; GWES will pass this value to the LCD driver; the driver will open the
; key to which it points to read its configuration.
[HKEY_LOCAL_MACHINE\System\GDI\DisplayCandidates]
	"Candidate10"="Drivers\\Display\\S3C2410\\CONFIG"
ENDIF BSP_NODISPLAY !
; @CESYSGEN ENDIF CE_MODULES_DISPLAY

; ----------------------------------------------------------------------------
; Select a Direct3D Mobile Driver

; @CESYSGEN IF DIRECTX_MODULES_D3DM
IF BSP_D3DM_NULL
IF BSP_D3DM_NULL_REMOTE
[HKEY_LOCAL_MACHINE\System\D3DM\Drivers]
   "RemoteHook"="d3dm_nulldrv.dll"
ELSE
[HKEY_LOCAL_MACHINE\System\D3DM\Drivers]
   "LocalHook"="d3dm_nulldrv.dll"
ENDIF BSP_D3DM_NULL_REMOTE
ENDIF BSP_D3DM_NULL
; @CESYSGEN ENDIF DIRECTX_MODULES_D3DM



; @CESYSGEN IF CE_MODULES_PRNPORT
; Printer Port settings
[HKEY_LOCAL_MACHINE\Printers\Ports]
    "Port1"="COM9: 9600"
    "Port2"="COM9: 57600"
    "Port3"="IRDA"
    "Port4"="NET0:"
; @CESYSGEN ENDIF



; added for DM9000
IF BSP_NOETHER !
IF SYSGEN_ETHERNET

#include "$(_TARGETPLATROOT)\src\drivers\DM9000\dm9000.reg"

ENDIF
ENDIF


; I2C 
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\I2C]
	"Index"=dword:1
	"Prefix"="IIC"
	"Dll"="I2C.dll"
	"Order"=dword:0

; pwm 
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PWM]
	"Index"=dword:1
	"Prefix"="PWM"
	"Dll"="pwm.dll"
	"Order"=dword:0

; adc 
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ADC]
	"Index"=dword:1
	"Prefix"="ADC"
	"Dll"="adc.dll"
	"Order"=dword:0

; S3C2410 GPIO
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GPIO]
	"Index"=dword:1
	"Prefix"="PIO"
	"Dll"="gpio.dll"
	"Order"=dword:0	

; S3C2410 SDMMCLoader
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDMMCLoader]
	"Index"=dword:1
	"Prefix"="SML"
	"Dll"="SDMMCLoader.dll"
	"Order"=dword:0

; CAN Bus
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\CAN]
	"Index"=dword:1
	"Order"=dword:0
	"Prefix"="CAN"
	"Dll"="can.dll"
	"FriendlyName"="CAN Driver"