?? 2410test.c
字號:
//====================================================================
// File Name : 2410test.c
// Function : S3C2410 Test Main Menu
// Program : Shin, On Pil (SOP)
// Date : June 13, 2003
// Version : 0.0
// History
//====================================================================
#include <stdlib.h>
#include <string.h>
#include "def.h"
#include "option.h"
#include "2410addr.h"
#include "2410lib.h"
#include "2410slib.h"
#include "2410etc.h"
#include "2410IIC.h"
#include "2410iis.h"
#include "2410int.h"
#include "2410RTC.h"
#include "2410swi.h"
//#include "lcdpwr.h"
#include "timer.h"
#include "cpuspeed.h"
#include "adc.h"
#include "dma.h"
#include "dma2.h"
#include "eint.h"
#include "extdma.h"
#include "k9s1208.h"
#include "mmu.h"
#include "nwait.h"
#include "sdi.h"
#include "stone.h"
#include "ts_auto.h"
#include "ts_sep.h"
#include "usbfifo.h"
#include "IrDA.h"
#include "lcd.h"
#include "lcdlib.h"
#include "glib.h"
#include "palette.h"
#include "spi.h"
#include "uart0.h"
#include "uart1.h"
#include "uart2.h"
#include "iis_dual.h"
#include "etc.h"
#include "flash.h"
#include "idle.h"
#include "pd6710.h"
#include "pll.h"
#include "power.h"
#include "pwr_c.h"
#include "PowerOff.h"
#include "cache.h"
void Isr_Init(void);
void HaltUndef(void);
void HaltSwi(void);
void HaltPabort(void);
void HaltDabort(void);
extern void __rt_lib_init( void ) ;
void Temp_Function( void ) { ; }
void * function[][2]=
{
(void *)Temp_Function, " ",
//ADC, TSP
(void *)Test_Adc, "ADC ",
(void *)Test_DMA_Adc, "ADC with DMA ",
(void *)Ts_Sep, "ADC TSP Seperate ",
(void *)Ts_Auto, "ADC TSP Auto ",
//DMA
(void *)Test_DMA, "DMA M2M ",
(void *)Test_DMAWorst, "DMA Worst Test ",
(void *)Test_Dma0Xdreq, "External DMA ",
//EINT
(void *)Test_Eint, "External Interrupt ",
//IIC
(void *)Test_Iic, "IIC(KS24C080)INT ",
(void *)Test_Iic2, "IIC(KS24C080)POL ",
//IIS
(void *)Test_IisRecPlay, "IIS Reco&Play Test ",
(void *)Record_Iis, "Reco IIS UDA1341 ",
(void *)Test_Iis, "Play IIS UDA1341 ",
(void *)Iis_Tx, "IIS Slave Set Test ",
(void *)Iis_Rx, "IIS Master Set Test ",
//Interrupt
(void *)Test_Fiq, "FIQ Interrupt ",
(void *)Change_IntPriorities, "Change INT Priority ",
//IrDA
(void *)Test_IrDA_Rx, "UART2 IrDA Rx ",
(void *)Test_IrDA_Tx, "UART2 IrDA Tx ",
//LCD
(void *)Test_PaletteMemory, "LCD Palette RAM ",
(void *)Test_Lcd_Stn_1Bit, "STN 1Bit ",
(void *)Test_Lcd_Stn_2Bit, "STN 2Bit ",
(void *)Test_Lcd_Stn_4Bit, "STN 4Bit ",
(void *)Test_Lcd_Cstn_8Bit, "CSTN 8Bit ",
(void *)Test_Lcd_Cstn_8Bit_On, "CSTN 8Bit On ",
(void *)Test_Lcd_Cstn_12Bit, "CSTN 12Bit ",
(void *)Test_Lcd_Tft_8Bit_240320, "TFT240320 8Bit ",
(void *)Test_Lcd_Tft_8Bit_240320_On, "TFT240320 8Bit On ",
(void *)Test_Lcd_Tft_16Bit_240320, "TFT240320 16Bit ",
// (void *)Test_Lcd_Tft_8Bit_240320_Bmp, "TFT240320 Bmp ",
(void *)Test_Lcd_Tft_1Bit_640480, "TFT640480 1Bit ",
(void *)Test_Lcd_Tft_8Bit_640480, "TFT640480 8Bit ",
(void *)Test_Lcd_Tft_16Bit_640480, "TFT640480 16Bit ",
(void *)Test_Lcd_Tft_8Bit_640480_Bswp, "TFT640480 BSWP ",
(void *)Test_Lcd_Tft_8Bit_640480_Palette, "TFT640480 Palette ",
(void *)Test_Lcd_Tft_16Bit_640480_Hwswp,"TFT640480 HWSWP ",
// (void *)Test_Lcd_PowerOnOFF, "LCD Power On/Off ",
//Memory
// (void *)WriteMemory, "MEMORY Write ",
// (void *)ReadMemory, "MEMORY Read ",
//MPLL
(void *)Test_PLL, "MPLL Change ",
(void *)ChangePLL, "MPLL MPS Change ",
(void *)Test_PllOnOff, "MPLL On/Off ",
//PMS
(void *)Test_SlowMode, "PMS Slow ",
(void *)Test_HoldMode, "PMS Hold ",
(void *)Test_IdleMode, "PMS Idle ",
(void *)Test_MMUIdleMode, "PMS Idle(MMU) ",
(void *)Test_IdleModeHard, "PMS Idle Hard ",
(void *)Test_InitSDRAM, "PMS SDRAM Init ",
(void *)Test_PowerOffMode, "PMS Power-Off ",
(void *)Test_PowerOffMode_100Hz, "PMS Power-Off 100Hz ",
(void *)MeasurePowerConsumption, "PMS Measure Power ",
//RTC
(void *)Test_Rtc_Alarm, "RTC Alarm ",
(void *)Display_Rtc, "RTC Display ",
(void *)RndRst_Rtc, "RTC Round Reset ",
(void *)Test_Rtc_Tick, "RTC Tick ",
//SDI
(void *)Test_SDI, "SDI Write/Read ",
// (void *)MMC_Protect, "SDI MMC Protect ",
// (void *)MMC_Dma_StrRd, "SDI MMC Read ",
// (void *)MMC_Dma_StrWt, "SDI MMC Write ",
//SPI
(void*) Test_Spi_MS_int, "SPI0 RxTx Int ",
(void *)Test_Spi_MS_poll, "SPI0 RxTx POLL ",
(void *)Test_Spi_M_Tx_DMA1, "SPI0 Master Tx DMA1 ",
(void *)Test_Spi_S_Rx_DMA1, "SPI0 Slave Rx DMA1 ",
(void *)Test_Spi_M_Rx_DMA1, "SPI0 Master Rx DMA1 ",
(void *)Test_Spi_S_Tx_DMA1, "SPI0 Slave Tx DMA1 ",
(void *)Test_Spi_M_Int, "SPI0 Master RxTx INT",
(void *)Test_Spi_S_Int, "SPI0 Slave RxTx INT ",
//Timer
// (void *)Test_TimerChannel, "Timer Channel ",
// (void *)Test_TimerDma, "Timer DMA ",
(void *)Test_TimerInt, "Timer Interrupt ",
(void *)Test_Timer, "Timer Tout ",
//UART
(void *)Test_Uart0_Int, "UART0 Rx/Tx Int ",
(void *)Test_Uart0_Dma, "UART0 Rx/Tx DMA ",
(void *)Test_Uart0_Fifo, "UART0 Rx/Tx FIFO ",
(void *)Test_Uart0_AfcTx, "UART0 AFC Tx ",
(void *)Test_Uart0_AfcRx, "UART0 AFC Rx ",
(void *)Test_Uart1_Int, "UART1 Rx/Tx Int ",
(void *)Test_Uart1_Dma, "UART1 Rx/Tx DMA ",
(void *)Test_Uart1_Fifo, "UART1 Rx/Tx FIFO ",
(void *)Test_Uart1_AfcTx, "UART1 AFC Tx ",
(void *)Test_Uart1_AfcRx, "UART1 AFC Rx ",
(void *)Test_Uart2_Int, "UART2 Rx/Tx Int ",
(void *)Test_Uart2_Dma, "UART2 Rx/Tx DMA ",
(void *)Test_Uart2_Fifo, "UART2 Rx/Tx FIFO ",
//USB
(void *)Test_USBFIFO, "USB FIFO Test ",
//WDT
(void *)Test_WDT_IntReq, "WDT INT Request ",
//ETC
(void *)Test_CpuSpeed, "Core Speed(LED) ",
(void *)Test_XBREQ, "External Bus Reqest ",
(void *)Test_NonalignedAccess, "NonAlgined Access ",
(void *)Test_PD6710, "PC Card (PD6710) ",
(void *)ReadPageMode, "Read Page Mode ",
(void *)Test_SwiIrq, "SWI ",
(void *)Test_WaitPin, "External Wait ",
(void *)Test_ISram, "Stone Test ",
(void *)Test_NecInterrupt, "ETC NEC Int ",
(void *)Test_BattFaultInterrupt, "nBATT_FAULT int ",
(void *)Test_Cache, "Core Cache Test ",
//NAND, NOR Flash
(void *)K9S1208_PrintBadBlockNum, "NAND View Bad Block ",
(void *)K9S1208_PrintBlock, "NAND View Page ",
(void *)K9S1208_Program, "NAND Write ",
(void *)K9S1208_Erase, "NAND Erase ",
(void *)TestECC, "NAND ECC ",
(void *)ProgramFlash, "NOR Flash Program ",
0,0
};
//===================================================================
void Main(void)
{
int i;
Led_Display(15);
MMU_Init();
#if ADS10
__rt_lib_init(); //for ADS 1.0
#endif
// ChangeClockDivider(0,0); // 1:1:1
// ChangeClockDivider(0,1); // 1:1:2
// rCLKDIVN |= (1<<2); // 1:4:4
// ChangeClockDivider(1,0); // 1:2:2
ChangeClockDivider(1,1); // 1:2:4
// ChangeMPllValue(0xa1,0x3,0x3); // FCLK=50.7MHz
// ChangeMPllValue(0x7f,0x2,0x2); // FCLK=101.25MHz
// ChangeMPllValue(0x96,0x5,0x1); // FCLK=135428571Hz
// ChangeMPllValue(0x2a,0x1,0x0); // FCLK=200MHz
// ChangeMPllValue(0x5c,0x1,0x1); // FCLK=200MHz
// ChangeMPllValue(0x5c,0x4,0x0); // FCLK=200MHz
// ChangeMPllValue(0x8e,0x7,0x0); // FCLK=200MHz
ChangeMPllValue(0xa1,0x3,0x1); // FCLK=202.8MHz
// ChangeMPllValue(0x66,0x1,0x1); // FCLK=220MHz
// ChangeMPllValue(0x69,0x1,0x1); // FCLK=226MHz
// ChangeMPllValue(0x96,0x2,0x1); // FCLK=237MHz
// ChangeMPllValue(0x7d,0x4,0x0); // FCLK=266MHz
Port_Init(); //IO端口初始化
Isr_Init();
// Rtc_Init();
Led_Display(0x00); //led閃爍
Led_Display(0x0f);
Led_Display(0x05);
Led_Display(0x0a);
Uart_Init(0,115200);
Uart_Select(0);
//Check whether or not the POWER_OFF wake-up.
Delay(0); //calibrate Delay()
Check_PowerOffWakeUp(); //It's needed for power-off STOP mode test.
//SJS July 15, 2002
//Turn on LCD. All test will be done while the LCD is turned on.
//PWR_Lcd_Tft_16Bit_240320_On();
//Save the wasted power consumption on GPIO.
rIISPSR=(2<<5)|(2<<0); //IIS_LRCK=44.1Khz @384fs,PCLK=50Mhz.
rGPHCON = rGPHCON & ~(0xf<<18)|(0x5<<18); //CLKOUT 0,1=OUTPUT to reduce the power consumption.
//SJS July 15, 2002
//Turn on LCD. All test will be done while the LCD is turned on.
Test_Lcd_Tft_8Bit_240320_On();
/*
while( 1 )
{
Uart_Printf("\n\n") ;
Test_Lcd_Tft_16Bit_240320() ;
//Uart_Printf("\n\n") ;
//Test_Lcd_Tft_16Bit_640480() ;
}
*/
while(1)
{
i = 0;
Uart_Printf("\n\nS3C2410 Board Test Program Ver1.00(2004-3-29 14:19)") ;
Uart_Printf("\tFCLK = %dHz\n\n", FCLK);
while(1)
{ //display menu
Uart_Printf(" %2d:%s",i,function[i][1]);
i++;
if((int)(function[i][0])==0)
{
Uart_Printf("\n");
break;
}
if((i%4)==0)
Uart_Printf("\n");
}
Uart_Printf("\nSelect the function to test : ");
i = Uart_GetIntNum();
Uart_Printf("\n");
//GPG4 Output Port [9:8] 01 -> LCD power On
rGPGCON = (rGPGCON & 0xfffffcff) | (1<<8);
rGPGDAT = (rGPGDAT & 0xffef) | (1<<4);
if(i>=0 && (i<(sizeof(function)/8)) )
( (void (*)(void)) (function[i][0]) )();
}
}
//===================================================================
void Isr_Init(void)
{
pISR_UNDEF = (unsigned)HaltUndef;
pISR_SWI = (unsigned)HaltSwi;
pISR_PABORT = (unsigned)HaltPabort;
pISR_DABORT = (unsigned)HaltDabort;
rINTMOD = 0x0; //All=IRQ mode
// rINTCON=0x5; //Non-vectored,IRQ enable,FIQ disable
rINTMSK = BIT_ALLMSK; //All interrupt is masked.
rINTSUBMSK = BIT_SUB_ALLMSK; //All sub-interrupt is masked. <- April 01, 2002 SOP
// rINTSUBMSK = ~(BIT_SUB_RXD0); //Enable Rx0 Default value=0x7ff
// rINTMSK = ~(BIT_UART0); //Enable UART0 Default value=0xffffffff
// pISR_UART0=(unsigned)RxInt; //pISR_FIQ,pISR_IRQ must be initialized
}
//===================================================================
void HaltUndef(void)
{
Uart_Printf("Undefined instruction exception.\n");
while(1);
}
//===================================================================
void HaltSwi(void)
{
Uart_Printf("SWI exception.\n");
while(1);
}
//===================================================================
void HaltPabort(void)
{
Uart_Printf("Pabort exception.\n");
while(1);
}
//===================================================================
void HaltDabort(void)
{
Uart_Printf("Dabort exception.\n");
while(1);
}
//===================================================================
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -