01h reduced capability driver
		2Bh full capability driver (before v4.00)
Program: ANSIPLUS.SYS is a CON device driver by Kristofer Sweger which
	  replaces the normal ANSI.SYS with a more powerful version having
	  many additional features
Notes:	ANSIPLUS also identifies itself as ANSI.SYS if BX,CX, or DX differ
	  from the magic values above
	an additional installation check is to test for the signature
	  "ANSIPLUS" 12 bytes before the INT 29 entry point; the version
	  number is also available as a four-character ASCII string (e.g.
	  "4.00") four bytes before the entry point
SeeAlso: AX=1AA5h,AX=1AA6h,AX=1AA7h,AX=1AA8h,AX=1AA9h,AX=1AAAh,AX=D44Fh
--------V-2F1A00BX4156-----------------------
INT 2F - AVATAR.SYS - INSTALLATION CHECK
	AX = 1A00h
	BX = 4156h ('AV')
	CX = 4154h ('AT')
	DX = 4152h ('AR')
Return: AL = FFh if installed
	    CF clear
	    BX = AVATAR protocol level supported
	    CX = driver type
		0000h AVATAR.SYS
		4456h DVAVATAR.COM inside DESQview window
	    DX = 0016h
Program: AVATAR.SYS is a CON replacement by George Adam Stanislav which
	  interprets AVATAR command codes in the same way that ANSI interprets
	  ANSI command codes
Notes:	AVATAR also identifies itself as ANSI.SYS if BX, CX, or DX differ from
	  the magic values
SeeAlso: AX=1A21h,AX=1A3Ch,AX=1A3Fh,AX=1A52h,AX=1A72h,AX=1A7Dh,AX=1AADh"AVATAR"
--------V-2F1A01-----------------------------
INT 2F U - DOS 4.0+ ANSI.SYS internal - GET/SET DISPLAY INFORMATION
	AX = 1A01h
	CL = function
	    7Fh for GET
	    5Fh for SET
	DS:DX -> parm block as for INT 21,AX=440Ch,CX=037Fh/035Fh respectively
Return: CF clear if successful
	    AX destroyed
	CF set on error
	    AX = error code (many non-standard)
Note:	presumably this is the DOS IOCTL interface to ANSI.SYS
SeeAlso: AX=1A02h,INT 21/AX=440Ch
--------V-2F1A02-----------------------------
INT 2F U - DOS 4.0+ ANSI.SYS internal - MISCELLANEOUS REQUESTS
	AX = 1A02h
	DS:DX -> parameter block (see #02735)
Return: CF clear if successful
	CF set on error
	    AX = error code
Note:	DOS 5+ chains to previous handler if AL > 02h on call
SeeAlso: AX=1A01h

Format of ANSI.SYS parameter block:
Offset	Size	Description	(Table 02735)
 00h	BYTE	subfunction
		00h set/reset interlock
		01h get /L flag
 01h	BYTE	interlock state
		00h=reset, 01h=set
		  This interlock prevents some of the ANSI.SYS post-processing
		  in its hook onto INT 10, AH=00h mode set
 02h	BYTE	(returned)
		00h if /L not in effect
		01h if /L in effect
--------V-2F1A21-----------------------------
INT 2F - AVATAR.SYS - SET DRIVER STATE
	AX = 1A21h (AL='!')
	DS:SI -> command string with one or more state characters (see #02736)
	CX = length of command string
Return: CF set on error (invalid subfunction)
	CF clear if successful
Note:	the characters in the state string are interpreted left to right, and
	  need not be in any particular order
SeeAlso: AX=1A00h/BX=4156h,AX=1A3Fh

(Table 02736)
Values for AVATAR.SYS state characters:
 'a'	activate driver
 'd'	disable driver
 'f'	use fast screen output
 'g'	always convert gray keys (+ and -) to function keys
 'G'	never convert gray keys
 'l'	convert gray keys only when ScrollLock active
 's'	use slow screen output
 't'	Tandy 1000 keyboard (not yet implemented)
--------V-2F1A3C-----------------------------
INT 2F U - AVATAR.SYS v0.11 - ???
	AX = 1A3Ch
	???
Return: CX = 0000h
SeeAlso: AX=1A00h/BX=4156h,AX=1A21h,AX=1A3Eh
--------V-2F1A3E-----------------------------
INT 2F U - AVATAR.SYS v0.11 - ???
	AX = 1A3Eh
	CL = ???
	CH = ???
	DL = ???
	DH = ???
Return: CL = ???
	CH = ???
	DL = ???
	DH = ???
SeeAlso: AX=1A3Ch,AX=1A3Fh
--------V-2F1A3F-----------------------------
INT 2F - AVATAR.SYS - QUERY DRIVER STATE
	AX = 1A3Fh (AL='?')
	ES:DI -> buffer
	CX = length of buffer in bytes
Return: CF clear
	CX = actual size of returned info
Note:	the returned information consists of multiple letters whose meanings
	  are described under AX=1A21h
SeeAlso: AX=1A00h/BX=4156h,AX=1A21h,AX=1A44h
--------S-2F1A42BX4156-----------------------
INT 2F - AVATAR Serial Dispatcher - INSTALL IRQ3 HANDLER
	AX = 1A42h
	BX = 4156h ('AV')
	ES:DI -> FAR handler for serial port using IRQ3
	DS = data segment needed by handler
Return: AX = status/return value
	    0000h if no more room
	    1A42h if ASD not installed
	    else handle to use when uninstalling
Notes:	the handler need not save/restore registers or signal EOI to the
	  interrupt controller
	the handler should return AX=0000h if the interrupt was meant for it,
	  and either leave AX unchanged or return a non-zero value otherwise
	the most recently installed handler will be called first, continuing
	  to earlier handlers until one returns AX=0000h
SeeAlso: AX=1A43h,AX=1A62h
--------S-2F1A43BX4156-----------------------
INT 2F - AVATAR Serial Dispatcher - INSTALL IRQ4 HANDLER
	AX = 1A43h
	BX = 4156h ('AV')
	ES:DI -> FAR handler for serial port using IRQ4
	DS = data segment needed by handler
Return: AX = status/return value
	    0000h if no more room
	    1A43h if ASD not installed
	    else handle to use when uninstalling
Notes:	(see AX=1A42h)
SeeAlso: AX=1A42h,AX=1A63h
--------V-2F1A44BX4156-----------------------
INT 2F - AVATAR.SYS v0.11+ - GET DATA SEGMENT
	AX = 1A44h
	BX = 4156h ('AV')
Return: AX = 0000h
	DS = data segment
	CX = size of data segment
Note:	AVATAR.SYS calls this function whenever it is invoked.	If each
	  process under a multitasker hooks this function and provides a
	  separate data segment, AVATAR.SYS becomes fully reentrant.
SeeAlso: AX=1A21h,AX=1A3Fh,AX=1A52h
--------V-2F1A52-----------------------------
INT 2F U - AVATAR.SYS v0.11 - GET ???
	AX = 1A52h
	CX = size of buffer
	ES:DI -> buffer
Return: ??? copied into user buffer
Note:	the maximum size of the data which may be copied is returned by
	  AX=1A72h
SeeAlso: AX=1A53h,AX=1A72h
--------V-2F1A53-----------------------------
INT 2F U - AVATAR.SYS v0.11 - ???
	AX = 1A53h
	CL = ??? (00h-05h)
	???
Return: ???
SeeAlso: AX=1A00h/BX=4156h,AX=1A52h,AX=1A72h
--------S-2F1A62BX4156-----------------------
INT 2F - AVATAR Serial Dispatcher - UNINSTALL IRQ3 HANDLER
	AX = 1A62h
	BX = 4156h ('AV')
	CX = handle for IRQ routine returned by AX=1A42h
SeeAlso: AX=1A42h,AX=1A63h
--------S-2F1A63BX4156-----------------------
INT 2F - AVATAR Serial Dispatcher - UNINSTALL IRQ4 HANDLER
	AX = 1A63h
	BX = 4156h ('AV')
	CX = handle for IRQ routine returned by AX=1A43h
SeeAlso: AX=1A43h,AX=1A62h
--------V-2F1A72-----------------------------
INT 2F U - AVATAR.SYS v0.11 - GET ??? SIZE
	AX = 1A72h
Return: CX = maximum size of ???
SeeAlso: AX=1A00h/BX=4156h,AX=1A52h,AX=1A7Bh,AX=1AADh"AVATAR"
--------V-2F1A7B-----------------------------
INT 2F U - AVATAR.SYS v0.11 - ???
	AX = 1A7Bh
Return: AX = 0000h
	CX = 0000h
SeeAlso: AX=1A00h/BX=4156h,AX=1A72h,AX=1A7Dh
--------V-2F1A7D-----------------------------
INT 2F U - AVATAR.SYS v0.11 - ???
	AX = 1A7Dh
Return: AX = ???
SeeAlso: AX=1A00h/BX=4156h,AX=1A7Bh
--------V-2F1AA3-----------------------------
INT 2F - ANSIPLUS v4.03+ - GET/SET ANSIPLUS INTERNAL VARIABLES
	AX = 1AA3h
	BH = function
	    00h get current/default colors
		Return: CH = default colors
			CL = current colors
	    01h set current/default colors
		CH = default colors (00h = leave unchanged)
		CL = current colors
	    02h get current subscreen region
		Return: BH,BL = true screen rows,columns
			CH,CL = top left row,column of region
			DH,DL = bottom right row,column of region
	    03h set subscreen region
		CH,CL = top left row,column of region
		DH,DL = bottom right row,column of region
	    04h get driver features (bits 0-31)
		Return: DX:CX = current feature bits
	    05h set driver features (bits 0-31)
		DX:CX = feature bits
	    06h get driver features (bits 32-63)
		Return: DX:CX = current feature bits
	    07h set driver features (bits 32-63)
		DX:CX = feature bits
	    other: reserved for future use
SeeAlso: AX=1AA4h,AX=1AA5h
--------V-2F1AA4-----------------------------
INT 2F - ANSIPLUS v4.02+ - GET/SET ANSIPLUS SMOOTH SCROLLING RATE
	AX = 1AA4h
	BL = function
	    00h get scrolling rate
	    01h set scrolling rate
		BH = new minimum scrolling rate in scan lines per retrace
Return: BH = smooth scrolling rate
SeeAlso: AX=1AA3h,AX=1AA5h
--------V-2F1AA5-----------------------------
INT 2F - ANSIPLUS v4.00+ - GET/SET ANSIPLUS CLIPBOARD
	AX = 1AA5h
	DH = subfunction
	    00h get clipboard information
	    01h get clipboard text
	    02h set clipboard text
	    03h append text to clipboard
	    04h clear clipboard
	    05h paste clipboard to keyboard
	ES:BX -> data area for subfunctions 01h, 02h, and 03h
	CX = size of data area (maximum size for subfunction 01h, actual size
	    to add to clipboard for subfunctions 02h and 03h)
Return: AL = status
	    00h successful
	    01h unsupported subfunction (reduced capability driver)
	    02h insufficient space
	    A5h unsupported function (ANSIPLUS before v4.00)
	ES:BX -> ANSIPLUS local clipboard data
	CX = number of bytes currently in local clipboard
	DX = maximum size of local clipboard
SeeAlso: AX=1A00h/BX=414Eh,AX=1AA4h,AX=1AA6h
--------V-2F1AA6-----------------------------
INT 2F - ANSIPLUS v4.00+ - ENABLE/DISABLE ANSIPLUS DRIVER
	AX = 1AA6h
	BH = function
	    00h get hooked interrupts
	    01h set hooked interrupts mask
		BL = new interrupts mask (see #02737)
Return: BL = previous interrupts mask (see #02737)
SeeAlso: AX=1A00h/BX=414Eh,AX=1AA7h

Desc:	used to temporarily disable any prior copies of ANSIPLUS when a new
	  copy is installed, such as in a multitasking system like DESQview
Note:	only the most-recently loaded copy of ANSIPLUS on the current INT 2F
	  chain responds to this call

Bitfields for ANSIPLUS hooked interrupts mask:
Bit(s)	Description	(Table 02737)
 0	INT 09 hook disabled
 1	INT 10 hook disabled
 2	INT 15 hook disabled
 3	INT 16 hook disabled
 4	INT 1C hook disabled
 5	reset all bits when INT 29 called
 6	INT 29 hook disabled
 7	INT 33, INT 74, or other mouse event hook disabled
--------V-2F1AA7-----------------------------
INT 2F - ANSIPLUS v4.00+ - ENABLE/DISABLE ANSIPLUS FEATURES
	AX = 1AA7h
	BL = function
	    00h prevent scroll-back saves
	    01h enable scroll-back saves
	    02h disable key reprogramming and lock changes by escape sequences
	    03h enable key reprogramming by escape sequences
	    04h	disable and lock key stacking changes by escape sequences
	    05h allow key stacking by escape sequences
Return: nothing
SeeAlso: AX=1AA6h
--------V-2F1AA8-----------------------------
INT 2F - ANSIPLUS v3.10+ - GET NEXT ANSIPLUS SCROLLBACK LINE
	AX = 1AA8h
Return: AL = status
	    00h successful
		ES:BX -> screen line (character and attribute pairs)
		CX = length of line in bytes, 0000h if no more lines or
		      unsupported video mode
	    01h unsupported video mode active
	    02h screen currently scrolled back
	    03h reduced capability driver
	    A8h unsupported function (driver before v3.10)
SeeAlso: AX=1A00h/BX=414Eh,AX=1AA9h
--------V-2F1AA9-----------------------------
INT 2F - ANSIPLUS v3.10+ - GET ANSIPLUS SCROLLBACK INFORMATION
	AX = 1AA9h
Return: AL = status
	    00h successful
		BX = current number of lines in scrollback buffer
		CX = number of bytes in one line
	    01h unsupported video mode active
	    02h screen currently scrolled back
	    03h reduced capability driver
	    A9h unsupported function (driver before v3.10)
Desc:	determine how much data is in the scrollback buffer and initialize
	  scrollback retrieval to return the first line on the next call to
	  AX=1AA8h
SeeAlso: AX=1A00h/BX=414Eh,AX=1AA8h
--------V-2F1AAA-----------------------------
INT 2F - ANSIPLUS v3.01+ - GET/SET ANSIPLUS SCREEN SAVER BLANKING TIME
	AX = 1AAAh
	BX = function
	    FFFFh to get current blanking time
	    other to set time
		CX = blanking time in clock ticks (0000h-7FFFh)
Return: BX = current blanking time
	CX = blanking time when last set
SeeAlso: AX=1A00h/BX=414Eh,AX=1AABh