#-----------------------------------------------#Specify kernel version and include path#-----------------------------------------------KERNELRELEASE=$(shell uname -r)INCLUDEPATH=-I /usr/src/linux-$(KERNELRELEASE)/include/INSTALLPATH=/lib/modules/$(KERNELRELEASE)/kernel/drivers/net/wireless#-----------------------------------------------#Specify compiler and compile flags.#-----------------------------------------------XCC = gccLD = ldMODCFLAGS := -O6 -Wall -DMODULE -D__KERNEL__ -DLINUX#-----------------------------------------------#IO_FLAGS#Specify pci I/O space mapping#if High memory configuration has been turned on,#RTL_IO_MAP is the suggestion since ioremap #would fail. #-----------------------------------------------#IO_FLAGS = RTL_MEM_MAPIO_FLAGS = RTL_IO_MAP#-----------------------------------------------#ENDIAN_FLAGS#Specify memory access mothed. #RTL_LITTLE_ENDIAN is the suggestion on i386.#-----------------------------------------------#ENDIAN_FLAGS = RTL_BIG_ENDIANENDIAN_FLAGS = RTL_LITTLE_ENDIAN#-----------------------------------------------# Wireless LAN operation mode. #-----------------------------------------------#OP_MODE_FLAGS = RTL_ACT_AS_APOP_MODE_FLAGS = RTL_ACT_AS_STA#-----------------------------------------------# Wireless LAN driver flags.#-----------------------------------------------DRV_FLAGS = -D$(IO_FLAGS) -D$(ENDIAN_FLAGS) -D${OP_MODE_FLAGS} -DRTL8180_DRV_ON_PC -DENABLE_DBG_PRINT#-----------------------------------------------# Driver Target#-----------------------------------------------RTL8180_TARGET = rtl8180_24x.o#-----------------------------------------------#module initialization and interface.#-----------------------------------------------OPEN_SRCS = r8180_pci_init.c r8180_if.cOPEN_OBJS = ${OPEN_SRCS:.c=.o}# SUFFIXES fules.SUFFIXES: .c .o.c.o:	$(XCC) $(MODCFLAGS) $(INCLUDEPATH) ${DRV_FLAGS} -c -o $*.o $<#.PHONY: all cleanall: $(RTL8180_TARGET)$(RTL8180_TARGET): open_part	@echo "--- Generate rtl8180 linux driver  $(RTL8180_TARGET) on $(KERNELRELEASE) ---"	@$(LD) -r -o $@ ${^:=.o} priv_part.o	@rm -f ${^:=.o};	@echo ""open_part: ${OPEN_OBJS}	@echo "--- Generate open part open_part.o ---"	@$(LD) -r -o $@.o ${OPEN_OBJS}	@rm -f ${OPEN_OBJS}	@echo ""${OPEN_OBJS}: %.o: %.h r8180_type.h r8180_export.hinstall:	cp $(RTL8180_TARGET) $(INSTALLPATH)clean:	mv priv_part.o priv_part;\	rm -f *.o;\	mv priv_part priv_part.o