module dk3300_1
pa7 PIN 21;  "Reserved for Peripheral I/O mode
pa6 PIN 22;  "Reserved for Peripheral I/O mode
pa5 PIN 24;  "Reserved for Peripheral I/O mode
pa4 PIN 26;  "Reserved for Peripheral I/O mode
pa3 PIN 28;  "Reserved for Peripheral I/O mode
pa2 PIN 32;  "Reserved for Peripheral I/O mode
pa1 PIN 34;  "Reserved for Peripheral I/O mode
pa0 PIN 35;  "Reserved for Peripheral I/O mode
LCD_e PIN 66;
LCD_a1 PIN 67;
LCD_a0 PIN 71;
En_EB PIN 74;
En_EA PIN 76;
En_DirOut PIN 78;
En_PulseOut PIN 80;
tdo PIN 6; "TDO
tdi PIN 7; "TDI
tck PIN 16; "TCK
tms PIN 20;  "TMS
ale PIN 4; "ALE output
_psen PIN 63;
_rd PIN 65;
_wr PIN 62;
a11 PIN 57; "Address line
a10 PIN 55; "Address line
a9 PIN 53; "Address line
a8 PIN 51; "Address line
a7 PIN 47;  "Data/address bus line
a6 PIN 45;  "Data/address bus line
a5 PIN 43;  "Data/address bus line
a4 PIN 41;  "Data/address bus line
a3 PIN 39;  "Data/address bus line
a2 PIN 38;  "Data/address bus line
a1 PIN 37;  "Data/address bus line
a0 PIN 36;  "Data/address bus line
JTAG_debug_pin PIN 8; "JTAG debug pin
Xtal1 PIN 48; "Xtal1
Xtal2 PIN 49; "Xtal2
_Reset_In PIN 68;
VREF PIN 70; "VREF input
psel0 node;
rs0 node;
csiop node;
csboot0 node;
_reset node 543;
a12 node 512;
a13 node 513;
a14 node 514;
a15 node 515;
En_counter0 NODE istype 'reg_D';
En_PA NODE istype 'reg_D';
En_PB NODE istype 'reg_D';
En_Dir NODE istype 'reg_D';

X = .x.;
address = [a15..a0];
Vcc = 1;
Gnd = 0;




// Begin user preserved declarations (not affected by iterations of DA usage) ===================

//temp_pattern=[En_direction, En_counter2, En_counter1, En_counter0];
WSIPSD PROPERTY 'DataBus_OMC D[0:0]:En_counter[0:0] MCELLAB';     
                                                 
//WSIPSD PROPERTY 'DataBus_OMC D[3:3]:En_direction[0:0] MCELLBC'; 

DCOUNT = [En_counter0];				// 3-bit up-down counter
Count = (DCOUNT == 0);

// End user preserved declarations (not affected by iterations of DA usage) ===================



equations


rs0 = ((address >= ^h2000) & (address <= ^h3FFF));
csiop = ((address >= ^h0200) & (address <= ^h02FF));
csboot0 = ((address >= ^h0000) & (address <= ^h1FFF));
psel0 = ((address >= ^h0300) & (address <= ^h03FF) & (_psen));
LCD_e = ((address >= ^h0300) & (address <= ^h03FF) & (!_wr))
     # ((address >= ^h0300) & (address <= ^h03FF) & (!_rd));
LCD_a1 = a1;
LCD_a1.oe = Vcc;
LCD_a0 = a0;
LCD_a0.oe = Vcc;
En_DirOut = En_Dir;
En_DirOut.oe = Vcc;
En_PulseOut = En_PA& En_PB;
En_PulseOut.oe = Vcc;
En_counter0.ck = !(En_PA & En_PB);
En_counter0.re = !_reset;
En_counter0.pr = Gnd;
En_PA := Vcc;
En_PA.ck = Vcc;
En_PA.re = !(En_EA #( !En_EB));
En_PA.pr = En_EA &( !En_EB);
En_PB := Vcc;
En_PB.ck = Vcc;
En_PB.re = !(En_EA # En_EB);
En_PB.pr = En_EA & En_EB;
En_Dir := En_EB;
En_Dir.ck = !(En_PA & En_PB);
En_Dir.re = !_reset;
En_Dir.pr = Gnd;



// Begin user preserved equations (not affected by iterations of DA usage) ===================
//when(En_PulseA==0)
//then
//{
//	En_direction0.D=0;
//	En_direction0.C=En_PulseB;
//}
//when(En_PulseB==0)
//then
//{
//	En_direction0.D=1;
//	En_direction0.C=En_PulseA;
//}

//	En_direction.D=!En_direction&!En_PulseB			#En_direction	&En_PulseA;
//	En_direction.C=!En_direction&!En_PulseB&En_PulseA	#En_direction	&!En_PulseA&En_PulseB;
//	En_Pulse.D=En_direction&!En_PulseB#!En_direction&!En_PulseA;
//	En_Pulse.C=En_direction&(!En_PulseB&En_PulseA#En_PulseB&!En_PulseA) #!En_direction&
//			(!En_PulseB&En_PulseA#En_PulseB&!En_PulseA);
	


when Count then DCOUNT := DCOUNT + 1;			"Count up


/////////////////////////////////////////////////////////////////////

// End user preserved equations (not affected by iterations of DA usage) ===================

end dk3300_1