GTKTerm : a GTK+ serial port terminal=====================================         (c) Julien Schmitt - julien@jls-info.com         http://www.jls-info.com/julien/linuxThis program is released under the terms of the GPL V.2	 ** Use at your own risks ! **Command line options--help or -h : this help screen--config <configuration> or -c : load configuration--port <device> or -p : serial port device (default /dev/ttyS0)--speed <speed> or -s : serial port speed (default 9600)--bits <bits> or -b : number of bits (default 8)--stopbits <stopbits> or -t : number of stopbits (default 1)--parity <odd | even> or -a : partity (default none)--flow <Xon | CTS> or -w : flow control (default none)--delay <ms> or -d : end of line delay in ms (default none)--char <char> or -r : wait for a special char at end of line (default none)--file <filename> or -f : default file to send (default none)--echo or -e : switch on local echo