?? r_drawa.s
字號:
jz LDoFirst
cmpl %eax,et_u(%esi)
jl LNotFirst
LDoFirst:
// edge->next = newedges[v];
// newedges[v] = edge;
movl %esi,et_next(%edi)
movl %edi,C(newedges)(,%ebx,4)
jmp LSetRemove
// }
LNotFirst:
// else
// {
// pcheck = newedges[v];
//
// while (pcheck->next && pcheck->next->u < u_check)
// pcheck = pcheck->next;
LFindInsertLoop:
movl %esi,%edx
movl et_next(%esi),%esi
testl %esi,%esi
jz LInsertFound
cmpl %eax,et_u(%esi)
jl LFindInsertLoop
LInsertFound:
// edge->next = pcheck->next;
// pcheck->next = edge;
movl %esi,et_next(%edi)
movl %edi,et_next(%edx)
// }
LSetRemove:
// edge->nextremove = removeedges[v2];
// removeedges[v2] = edge;
movl C(removeedges)(,%ecx,4),%eax
movl %edi,C(removeedges)(,%ecx,4)
movl %eax,et_nextremove(%edi)
Ldone:
movl Lstack,%esp // clear temporary variables from stack
popl %ebx // restore register variables
popl %edi
popl %esi
ret
// at least one point is clipped
Lp2:
testl %eax,%eax
jns Lp1
// else
// {
// // point 0 is clipped
// if (d1 < 0)
// {
movl Ld1,%eax
testl %eax,%eax
jns Lp3
// // both points are clipped
// // we do cache fully clipped edges
// if (!leftclipped)
movl C(r_leftclipped),%eax
movl C(r_pedge),%ecx
testl %eax,%eax
jnz Ldone
// r_pedge->framecount = r_framecount;
movl C(r_framecount),%eax
andl $(FRAMECOUNT_MASK),%eax
orl $(FULLY_CLIPPED_CACHED),%eax
movl %eax,C(cacheoffset)
// return;
jmp Ldone
// }
Lp1:
// // point 0 is unclipped
// if (d1 >= 0)
// {
// // both points are unclipped
// continue;
// // only point 1 is clipped
// f = d0 / (d0 - d1);
flds Ld0
flds Ld1
fsubr %st(1),%st(0)
// // we don't cache partially clipped edges
movl $0x7FFFFFFF,C(cacheoffset)
fdivrp %st(0),%st(1)
subl $(mv_size),%esp // allocate space for clipvert
// clipvert.position[0] = pv0->position[0] +
// f * (pv1->position[0] - pv0->position[0]);
// clipvert.position[1] = pv0->position[1] +
// f * (pv1->position[1] - pv0->position[1]);
// clipvert.position[2] = pv0->position[2] +
// f * (pv1->position[2] - pv0->position[2]);
flds mv_position+8(%edx)
fsubs mv_position+8(%esi)
flds mv_position+4(%edx)
fsubs mv_position+4(%esi)
flds mv_position+0(%edx)
fsubs mv_position+0(%esi) // 0 | 1 | 2
// replace pv1 with the clip point
movl %esp,%edx
movl cp_leftedge(%ebx),%eax
testb %al,%al
fmul %st(3),%st(0)
fxch %st(1) // 1 | 0 | 2
fmul %st(3),%st(0)
fxch %st(2) // 2 | 0 | 1
fmulp %st(0),%st(3) // 0 | 1 | 2
fadds mv_position+0(%esi)
fxch %st(1) // 1 | 0 | 2
fadds mv_position+4(%esi)
fxch %st(2) // 2 | 0 | 1
fadds mv_position+8(%esi)
fxch %st(1) // 0 | 2 | 1
fstps mv_position+0(%esp) // 2 | 1
fstps mv_position+8(%esp) // 1
fstps mv_position+4(%esp)
// if (clip->leftedge)
// {
jz Ltestright
// r_leftclipped = true;
// r_leftexit = clipvert;
movl $1,C(r_leftclipped)
movl mv_position+0(%esp),%eax
movl %eax,C(r_leftexit)+mv_position+0
movl mv_position+4(%esp),%eax
movl %eax,C(r_leftexit)+mv_position+4
movl mv_position+8(%esp),%eax
movl %eax,C(r_leftexit)+mv_position+8
jmp Lcontinue
// }
Ltestright:
// else if (clip->rightedge)
// {
testb %ah,%ah
jz Lcontinue
// r_rightclipped = true;
// r_rightexit = clipvert;
movl $1,C(r_rightclipped)
movl mv_position+0(%esp),%eax
movl %eax,C(r_rightexit)+mv_position+0
movl mv_position+4(%esp),%eax
movl %eax,C(r_rightexit)+mv_position+4
movl mv_position+8(%esp),%eax
movl %eax,C(r_rightexit)+mv_position+8
// }
//
// R_ClipEdge (pv0, &clipvert, clip->next);
// return;
// }
jmp Lcontinue
// }
Lp3:
// // only point 0 is clipped
// r_lastvertvalid = false;
movl $0,C(r_lastvertvalid)
// f = d0 / (d0 - d1);
flds Ld0
flds Ld1
fsubr %st(1),%st(0)
// // we don't cache partially clipped edges
movl $0x7FFFFFFF,C(cacheoffset)
fdivrp %st(0),%st(1)
subl $(mv_size),%esp // allocate space for clipvert
// clipvert.position[0] = pv0->position[0] +
// f * (pv1->position[0] - pv0->position[0]);
// clipvert.position[1] = pv0->position[1] +
// f * (pv1->position[1] - pv0->position[1]);
// clipvert.position[2] = pv0->position[2] +
// f * (pv1->position[2] - pv0->position[2]);
flds mv_position+8(%edx)
fsubs mv_position+8(%esi)
flds mv_position+4(%edx)
fsubs mv_position+4(%esi)
flds mv_position+0(%edx)
fsubs mv_position+0(%esi) // 0 | 1 | 2
movl cp_leftedge(%ebx),%eax
testb %al,%al
fmul %st(3),%st(0)
fxch %st(1) // 1 | 0 | 2
fmul %st(3),%st(0)
fxch %st(2) // 2 | 0 | 1
fmulp %st(0),%st(3) // 0 | 1 | 2
fadds mv_position+0(%esi)
fxch %st(1) // 1 | 0 | 2
fadds mv_position+4(%esi)
fxch %st(2) // 2 | 0 | 1
fadds mv_position+8(%esi)
fxch %st(1) // 0 | 2 | 1
fstps mv_position+0(%esp) // 2 | 1
fstps mv_position+8(%esp) // 1
fstps mv_position+4(%esp)
// replace pv0 with the clip point
movl %esp,%esi
// if (clip->leftedge)
// {
jz Ltestright2
// r_leftclipped = true;
// r_leftenter = clipvert;
movl $1,C(r_leftclipped)
movl mv_position+0(%esp),%eax
movl %eax,C(r_leftenter)+mv_position+0
movl mv_position+4(%esp),%eax
movl %eax,C(r_leftenter)+mv_position+4
movl mv_position+8(%esp),%eax
movl %eax,C(r_leftenter)+mv_position+8
jmp Lcontinue
// }
Ltestright2:
// else if (clip->rightedge)
// {
testb %ah,%ah
jz Lcontinue
// r_rightclipped = true;
// r_rightenter = clipvert;
movl $1,C(r_rightclipped)
movl mv_position+0(%esp),%eax
movl %eax,C(r_rightenter)+mv_position+0
movl mv_position+4(%esp),%eax
movl %eax,C(r_rightenter)+mv_position+4
movl mv_position+8(%esp),%eax
movl %eax,C(r_rightenter)+mv_position+8
// }
jmp Lcontinue
// %esi = vec3_t point to transform and project
// %edx preserved
LTransformAndProject:
// // transform and project
// VectorSubtract (world, modelorg, local);
flds mv_position+0(%esi)
fsubs C(modelorg)+0
flds mv_position+4(%esi)
fsubs C(modelorg)+4
flds mv_position+8(%esi)
fsubs C(modelorg)+8
fxch %st(2) // local[0] | local[1] | local[2]
// TransformVector (local, transformed);
//
// if (transformed[2] < NEAR_CLIP)
// transformed[2] = NEAR_CLIP;
//
// lzi0 = 1.0 / transformed[2];
fld %st(0) // local[0] | local[0] | local[1] | local[2]
fmuls C(vpn)+0 // zm0 | local[0] | local[1] | local[2]
fld %st(1) // local[0] | zm0 | local[0] | local[1] |
// local[2]
fmuls C(vright)+0 // xm0 | zm0 | local[0] | local[1] | local[2]
fxch %st(2) // local[0] | zm0 | xm0 | local[1] | local[2]
fmuls C(vup)+0 // ym0 | zm0 | xm0 | local[1] | local[2]
fld %st(3) // local[1] | ym0 | zm0 | xm0 | local[1] |
// local[2]
fmuls C(vpn)+4 // zm1 | ym0 | zm0 | xm0 | local[1] |
// local[2]
fld %st(4) // local[1] | zm1 | ym0 | zm0 | xm0 |
// local[1] | local[2]
fmuls C(vright)+4 // xm1 | zm1 | ym0 | zm0 | xm0 |
// local[1] | local[2]
fxch %st(5) // local[1] | zm1 | ym0 | zm0 | xm0 |
// xm1 | local[2]
fmuls C(vup)+4 // ym1 | zm1 | ym0 | zm0 | xm0 |
// xm1 | local[2]
fxch %st(1) // zm1 | ym1 | ym0 | zm0 | xm0 |
// xm1 | local[2]
faddp %st(0),%st(3) // ym1 | ym0 | zm2 | xm0 | xm1 | local[2]
fxch %st(3) // xm0 | ym0 | zm2 | ym1 | xm1 | local[2]
faddp %st(0),%st(4) // ym0 | zm2 | ym1 | xm2 | local[2]
faddp %st(0),%st(2) // zm2 | ym2 | xm2 | local[2]
fld %st(3) // local[2] | zm2 | ym2 | xm2 | local[2]
fmuls C(vpn)+8 // zm3 | zm2 | ym2 | xm2 | local[2]
fld %st(4) // local[2] | zm3 | zm2 | ym2 | xm2 | local[2]
fmuls C(vright)+8 // xm3 | zm3 | zm2 | ym2 | xm2 | local[2]
fxch %st(5) // local[2] | zm3 | zm2 | ym2 | xm2 | xm3
fmuls C(vup)+8 // ym3 | zm3 | zm2 | ym2 | xm2 | xm3
fxch %st(1) // zm3 | ym3 | zm2 | ym2 | xm2 | xm3
faddp %st(0),%st(2) // ym3 | zm4 | ym2 | xm2 | xm3
fxch %st(4) // xm3 | zm4 | ym2 | xm2 | ym3
faddp %st(0),%st(3) // zm4 | ym2 | xm4 | ym3
fxch %st(1) // ym2 | zm4 | xm4 | ym3
faddp %st(0),%st(3) // zm4 | xm4 | ym4
fcoms Lfp_near_clip
fnstsw %ax
testb $1,%ah
jz LNoClip
fstp %st(0)
flds Lfp_near_clip
LNoClip:
fdivrs float_1 // lzi0 | x | y
fxch %st(1) // x | lzi0 | y
// // FIXME: build x/yscale into transform?
// scale = xscale * lzi0;
// u0 = (xcenter + scale*transformed[0]);
flds C(xscale) // xscale | x | lzi0 | y
fmul %st(2),%st(0) // scale | x | lzi0 | y
fmulp %st(0),%st(1) // scale*x | lzi0 | y
fadds C(xcenter) // u0 | lzi0 | y
// if (u0 < r_refdef.fvrectx_adj)
// u0 = r_refdef.fvrectx_adj;
// if (u0 > r_refdef.fvrectright_adj)
// u0 = r_refdef.fvrectright_adj;
// FIXME: use integer compares of floats?
fcoms C(r_refdef)+rd_fvrectx_adj
fnstsw %ax
testb $1,%ah
jz LClampP0
fstp %st(0)
flds C(r_refdef)+rd_fvrectx_adj
LClampP0:
fcoms C(r_refdef)+rd_fvrectright_adj
fnstsw %ax
testb $0x45,%ah
jnz LClampP1
fstp %st(0)
flds C(r_refdef)+rd_fvrectright_adj
LClampP1:
fld %st(1) // lzi0 | u0 | lzi0 | y
// scale = yscale * lzi0;
// v0 = (ycenter - scale*transformed[1]);
fmuls C(yscale) // scale | u0 | lzi0 | y
fmulp %st(0),%st(3) // u0 | lzi0 | scale*y
fxch %st(2) // scale*y | lzi0 | u0
fsubrs C(ycenter) // v0 | lzi0 | u0
// if (v0 < r_refdef.fvrecty_adj)
// v0 = r_refdef.fvrecty_adj;
// if (v0 > r_refdef.fvrectbottom_adj)
// v0 = r_refdef.fvrectbottom_adj;
// FIXME: use integer compares of floats?
fcoms C(r_refdef)+rd_fvrecty_adj
fnstsw %ax
testb $1,%ah
jz LClampP2
fstp %st(0)
flds C(r_refdef)+rd_fvrecty_adj
LClampP2:
fcoms C(r_refdef)+rd_fvrectbottom_adj
fnstsw %ax
testb $0x45,%ah
jnz LClampP3
fstp %st(0)
flds C(r_refdef)+rd_fvrectbottom_adj
LClampP3:
ret
#endif // id386
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -