* include/pkgconf/io_serial.h: Fixed CDL string for BAUD rate option.1999-06-04  Gary Thomas  <gthomas@cygnus.co.uk>	* tests/ser_test_protocol.inl: Disable testing at 115200	for Cogent CMA230 (ARM).	* src/arm/cma230_serial.c: Fix interrupt for port B.1999-05-31  Jesper Skov  <jskov@cygnus.co.uk>	* src/sh/sh_serial.c: Fixed receive interrupts and added handler for	error interrupts.1999-05-28  Jesper Skov  <jskov@cygnus.co.uk>	* io/serial/current/src/PKGconf.mak:	* io/serial/current/tests/ser_test_protocol.inl:	* include/pkgconf/io_serial.h: 	Renamed SH platform package to edk7708.1999-05-27  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl: Added ability to change options in	host software.1999-05-27  Jonathan Larmour  <jlarmour@cygnus.co.uk>	* src/mn10300/mn10300_serial.c (mn10300_serial_config_port): 	Wait for the serial device to become acquiescent before disabling	it. This prevents cygmon's outgoing characters getting corrupted	due to transmission being disabled.	Fix for PR 20047	1999-05-26  Gary Thomas  <gthomas@cygnus.co.uk>	* include/pkgconf/io_serial.h: 	* tests/ser_test_protocol.inl: Add Cogent CMA230 setup.		* src/arm/cma230_serial.c: Make names compatible with Cogent	PowerPC board.1999-05-26  Gary Thomas  <gthomas@cygnus.co.uk>	* tests/ser_test_protocol.inl: Add Cirrus Logic CL7211 setup.1999-05-26  Jesper Skov  <jskov@cygnus.co.uk>	* src/sh/sh_serial.c: Added more baud rate values. Disabled	interrupt driven receive. Fixed config_port to enable proper	interrupt flags.1999-05-25  Jonathan Larmour  <jlarmour@cygnus.co.uk>	* tests/ser_test_protocol.inl: 	Change all mentions of CYGPKG_HAL_TX39_JMR3904 to	CYGPKG_HAL_MIPS_TX39_JMR39041999-05-25  Jonathan Larmour  <jlarmour@cygnus.co.uk>	* src/PKGconf.mak (EXTRAS_COMPILE): Change CYG_HAL_TX39 to	CYG_HAL_MIPS_TX391999-05-25  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl: Added sh entry.1999-05-24  Jesper Skov  <jskov@cygnus.co.uk>	* src/PKGconf.mak:	* include/pkgconf/io_serial.h: 	* src/sh/sh_serial.c: 	Added sh driver.1999-05-18  Jesper Skov  <jskov@cygnus.co.uk>        PR 19926	* src/sparclite/sleb_sdtr.c (sleb_sdtr_rx_DSR): Only read chan if	there is one.1999-05-18  Jesper Skov  <jskov@cygnus.co.uk>        PR 19926	* src/arm/cl7211_serial.c (cl7211_serial_rx_DSR): Only read char	if there is one.1999-05-16  Gary Thomas  <gthomas@cygnus.co.uk>	* src/arm/cl7211_serial.c: Clean up, first working version.1999-05-14  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl: Removed workaround for spurious	Cogent reads.	* src/arm/aeb_serial.c:	* src/arm/aeb_serial.h: 	* src/arm/pid_serial_with_ints.c: 	* src/arm/pid_serial.h: 	* src/powerpc/cogent_serial.h: 	* src/powerpc/cogent_serial_with_ints.c:	Check for receive interrupt before reading.1999-05-13  Nick Garnett  <nickg@cygnus.co.uk>	The follow changes were made in a branch an have now been merged:    1999-04-21  Gary Thomas  <gthomas@cygnus.co.uk>	* src/mips/vrc4373_serial.c: Small changes to get working with	interrupts.	    1999-04-20  John Dallaway  <jld@cygnus.co.uk>	* include/pkgconf/io_serial.h: Fix CYGPKG_IO_SERIAL_TX39_JMR3904	parent attribute.1999-05-11  Gary Thomas  <gthomas@cygnus.co.uk>	* src/arm/cl7211_serial.c: Fix compile problems from merged code.1999-05-05  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl: Tidied up a bit and added	description of protocol.1999-05-05  Jesper Skov  <jskov@cygnus.co.uk>	* src/common/serial.c (serial_write, serial_read): Clear abort	flag at entry.1999-05-05  Jesper Skov  <jskov@cygnus.co.uk>	* tests/serial4.c (serial_test): Handle config fails correctly.	* tests/ser_test_protocol.inl: Better change_config	handling. Simple recovery and negotiation isn't timing	dependant. 1999-05-05  Jesper Skov  <jskov@cygnus.co.uk>	* tests/timeout.inl: Updated with the below changes.1999-05-05  Gary Thomas  <gthomas@cygnus.co.uk>	* misc/timeout.inl (timeout): Timeouts are relative, but alarms 	need absolute time values.1999-05-04  Jesper Skov  <jskov@cygnus.co.uk>        PR 20018	* tests/serial1.c (serial_test): Always PASS, regardless of	configuration.1999-05-04  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl: Reverse order of configurations -	run tests with slow baud rate first.	Only check CYG_KERNEL_DIAG_GDB_SERIAL_DIRECT for SLEB on RAM startup.1999-05-04  Jesper Skov  <jskov@cygnus.co.uk> 	* src/mn10300/mn10300_serial.c: 	Use interrupt enable/disable feature of serial port2 to allow 	coexistence with CygMon/hal_diag.  	* tests/ser_test_protocol.inl: Use port2 for MN10300.1999-04-28  Bart Veer  <bartv@cygnus.co.uk>	* src/PKGconf.mak (EXTRAS_COMPILE):	Use the new rules for generating libextras.a1999-04-26  Gary Thomas  <gthomas@cygnus.co.uk>	* include/pkgconf/io_serial.h: Add support for Cirrus Logic CL7211.1999-04-20  Gary Thomas  <gthomas@cygnus.co.uk>	* src/arm/aeb_serial.c: 	* src/arm/pid_serial_with_ints.c: Fix default baud rate if unbuffered.1999-04-20  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl: Added some comments. Disabled 38400	for SLEB. Only run test on SLEB if CygMon isn't used for diag	output.	1999-04-15  Jesper Skov  <jskov@cygnus.co.uk>        PR 19752	* tests/serial3.c:	* tests/serial5.c:	Run these tests at a lower baud rate on ARM AEB.	1999-04-14  Jesper Skov  <jskov@cygnus.co.uk>        PR 19839	* src/mn10300/mn10300_serial.c: 	Fix compiler warnings.1999-04-14  Bart Veer  <bartv@cygnus.co.uk>	* include/pkgconf/io_serial.h:	Reparent the board-specific serial devices below the actual boards.	1999-04-13  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl:	NA when run from simulator.1999-04-12  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl:	Disabled 115200 for MN10300.	Reclaim interrupt vectors from CygMon when testing on SLEB.1999-04-09  Gary Thomas  <gthomas@cygnus.co.uk>	* include/serial.h: Change SERIAL_CHANNEL setup so all channels	have serial callbacks, regardless of buffering.1999-04-09  Jesper Skov  <jskov@cygnus.co.uk>	* src/common/tty.c: 	* include/pkgconf/io_serial.h:	Added new ttydiag device layered on top of haldiag, so that tty0	can be layered on top of ser0.1999-04-08  Jesper Skov  <jskov@cygnus.co.uk>	* tests/tty1.c:                [added]	* tests/tty2.c:                [added]	* tests/PKGconf.mak: 	* tests/ser_test_protocol.inl:	Added two simple TTY tests.1999-04-07  Hugo Tyson  <hmt@cygnus.co.uk>	* src/sparclite/sleb_sdtr.h: Include cyg/hal/hal_io.h for I/O	macros instead of hal_diag.h where they had evolved before.1999-04-06  Jesper Skov  <jskov@cygnus.co.uk>	* tests/serial4.c (serial_test): 	* tests/serial3.c (serial_test): 	Reduce packet sizes.1999-03-31  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl: Added remaining targets to the	test.1999-03-31  Gary Thomas  <gthomas@cygnus.co.uk>	* src/sparclite/sleb_sdtr.c (sleb_sdtr_start_xmit): Fix timing race	when enabling xmit interrupts.1999-03-26  Gary Thomas  <gthomas@cygnus.co.uk>	* src/sparclite/sleb_sdtr.c: Change how the port is set up.  The transmitter	is now always enabled, just the interrupts are masked/unmasked to control it.	This lets the serial driver cooperate with Cygmon on the port used for GDB.	Note that currently serial input does not work for CON1 since Cygmon is	taking all of the receive interrupts for itself.	(sleb_sdtr_tx_DSR): Need to keep track whether xmit interrupt should be 	enabled - otherwise it can get enabled incorrectly and we get interrupted	to death!1999-03-26  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl: Send a DONE message after a no-echo	binary packet.1999-03-26  Hugo Tyson  <hmt@cygnus.co.uk>	* tests/serial5.c: 	* tests/serial4.c:	* tests/serial3.c:	* tests/serial2.c:	* tests/serial1.c:	Make these build when no kernel present; include of testcase	was the wrong side of the ifdef.1999-03-26  Jesper Skov  <jskov@cygnus.co.uk>	* tests/serial5.c:	* tests/serial4.c:	* tests/serial3.c:	* tests/serial2.c:	* tests/serial1.c:	Moved NOP check to ser_test_protocol open call.		* tests/ser_test_protocol.inl: Make sure the proper device is	selected for testing. Do NOP check in open call.1999-03-25  Gary Thomas  <gthomas@cygnus.co.uk>	* include/pkgconf/io_serial.h: 	* misc/console.c: 	* src/arm/aeb_serial.c: 	* src/arm/pid_serial_with_ints.c: 	* src/common/tty.c: 	* src/mips/tx3904_serial.c: 	* src/mn10300/mn10300_serial.c: 	* src/powerpc/cogent_serial_with_ints.c: 	* src/sparclite/sleb_sdtr.c: Update CDL to follow naming conventions.	* src/mips/tx3904_serial.c (tx3904_serial_config_port): 	Make sure port is enabled (CDL) before using it.	* src/mn10300/mn10300_serial.c (mn10300_serial_config_port): 	* src/powerpc/cogent_serial_with_ints.c (cogent_serial_config_port): 	* src/arm/aeb_serial.c (aeb_serial_config_port): 	* src/arm/pid_serial_with_ints.c (pid_serial_config_port): Change so that	the physical port is not modified unless the provided configuration is valid.	* src/sparclite/sleb_sdtr.c (sleb_sdtr_config_port): 	Using wrong config data.	* include/serialio.h: Add macros to support baud rate from CDL.	* include/pkgconf/io_serial.h: 	* src/mn10300/mn10300_serial.c: 	* src/mips/tx3904_serial.c (tx3904_serial_ISR): 	* src/sparclite/sleb_sdtr.c: 	* src/powerpc/cogent_serial_with_ints.c: 	* src/arm/pid_serial_with_ints.c: 	* src/arm/aeb_serial.c: Add configury for baud rate and buffer size.1999-03-24  Nick Garnett  <nickg@cygnus.co.uk>	* src/mips/tx3904_serial.c:	Now uses CYGHWR_HAL_MIPS_CPU_FREQ_ACTUAL to get CPU	frequency. This is a little more accurate than using	CYGHWR_HAL_MIPS_CPU_FREQ.1999-03-24  Gary Thomas  <gthomas@cygnus.co.uk>	* include/serialio.h (CYGNUM_SERIAL_BAUD_MIN/MAX): Add for completeness.	* src/arm/aeb_serial.c (aeb_serial_stop_xmit): 	* src/arm/pid_serial_with_ints.c (pid_serial_stop_xmit): Fix typo in comment.1999-03-24  Jesper Skov  <jskov@cygnus.co.uk>	* tests/ser_test_protocol.inl: Weeded out configs TX39 doesn't	like.	* src/powerpc/cogent_serial.h: 	Added copyright header.		* tests/ser_test_protocol.inl: 	* tests/serial1.c: 	* tests/serial2.c: 	* tests/serial3.c: 	* tests/serial4.c: 	* tests/serial5.c: 	Don't try to run tests when no IO device has been specified.	1999-03-23  Jesper Skov  <jskov@cygnus.co.uk>	* misc/serial1.c, misc/serial2.c, misc/serial3.c, misc/serial4.c,	* misc/serial5.c, misc/ser_test_protocol.inl	Deleted.1999-03-23  Jesper Skov  <jskov@cygnus.co.uk>	* misc/PKGconf.mak: 	* tests/timeout.inl: 	* tests/PKGconf.mak:	* tests/serial1.c: 	* tests/serial2.c: 	* tests/serial3.c: