?? system.lst
字號:
C51 COMPILER V7.06 SYSTEM 11/26/2004 11:32:44 PAGE 1
C51 COMPILER V7.06, COMPILATION OF MODULE SYSTEM
OBJECT MODULE PLACED IN .\8052-obj\system.obj
COMPILER INVOKED BY: C:\Keil\C51\BIN\C51.EXE ..\system.c LARGE OPTIMIZE(SIZE) BROWSE INTVECTOR(0X2000) INCDIR(D:\Work\op
-entcp\1-0-2\src\include\) DEFINE(MONITOR,CS8900) DEBUG OBJECTEXTEND CODE SYMBOLS PRINT(.\8052-lst\system.lst) PREPRINT(.
-\8052-lst\system.i) OBJECT(.\8052-obj\system.obj)
stmt level source
1 /*
2 *Copyright (c) 2000-2002 Viola Systems Ltd.
3 *All rights reserved.
4 *
5 *Redistribution and use in source and binary forms, with or without
6 *modification, are permitted provided that the following conditions
7 *are met:
8 *
9 *1. Redistributions of source code must retain the above copyright
10 *notice, this list of conditions and the following disclaimer.
11 *
12 *2. Redistributions in binary form must reproduce the above copyright
13 *notice, this list of conditions and the following disclaimer in the
14 *documentation and/or other materials provided with the distribution.
15 *
16 *3. The end-user documentation included with the redistribution, if
17 *any, must include the following acknowledgment:
18 * "This product includes software developed by Viola
19 * Systems (http://www.violasystems.com/)."
20 *
21 *Alternately, this acknowledgment may appear in the software itself,
22 *if and wherever such third-party acknowledgments normally appear.
23 *
24 *4. The names "OpenTCP" and "Viola Systems" must not be used to
25 *endorse or promote products derived from this software without prior
26 *written permission. For written permission, please contact
27 *opentcp@opentcp.org.
28 *
29 *5. Products derived from this software may not be called "OpenTCP",
30 *nor may "OpenTCP" appear in their name, without prior written
31 *permission of the Viola Systems Ltd.
32 *
33 *THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED
34 *WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
35 *MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
36 *IN NO EVENT SHALL VIOLA SYSTEMS LTD. OR ITS CONTRIBUTORS BE LIABLE
37 *FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
38 *CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
39 *SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
40 *BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
41 *WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
42 *OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
43 *EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
44 *====================================================================
45 *
46 *OpenTCP is the unified open source TCP/IP stack available on a series
47 *of 8/16-bit microcontrollers, please see <http://www.opentcp.org>.
48 *
49 *For more information on how to network-enable your devices, or how to
50 *obtain commercial technical support for OpenTCP, please see
51 *<http://www.violasystems.com/>.
52 */
53
C51 COMPILER V7.06 SYSTEM 11/26/2004 11:32:44 PAGE 2
54 /** \file system.c
55 * \brief Various OpenTCP system functions
56 * \author
57 * \li Jari Lahti (jari.lahti@violasystems.com)
58 * \version 1.0
59 * \date 23.6.2002
60 * \bug
61 * \warning
62 * \todo
63 *
64 * This file contains system related functions and variables. See
65 * system.h for a list of function declarations, constants, etc.
66 *
67 */
68
69 #include <inet/arch/config.h>
*** WARNING C318 IN LINE 69 OF ..\system.c: can't open file 'inet/arch/config.h'
70 #include <inet/datatypes.h>
*** WARNING C318 IN LINE 70 OF ..\system.c: can't open file 'inet/datatypes.h'
71 #include <inet/system.h>
*** WARNING C318 IN LINE 71 OF ..\system.c: can't open file 'inet/system.h'
72 #include <inet/debug.h>
*** WARNING C318 IN LINE 72 OF ..\system.c: can't open file 'inet/debug.h'
73 #include <inet/arch/at89s8252/serial-io.h>
*** WARNING C318 IN LINE 73 OF ..\system.c: can't open file 'inet/arch/at89s8252/serial-io.h'
74 UINT32 base_timer; /**< System 1.024 msec timer */
*** ERROR C129 IN LINE 74 OF ..\SYSTEM.C: missing ';' before 'base_timer'
75
76 UINT8 sleep_mode = 0; /**< Used to store information about power-saving state we're in (if any) */
77
78 /** \brief Transmit buffer used by all OpenTCP applications
79 *
80 * This buffer is the transmit buffer used by all OpenTCP applications
81 * for sending of data. Please note the warnings below for correct usage
82 * of this buffer that ensures proper operation of the applications.
83 *
84 * \warning
85 * \li <b>Transmit buffer start</b> - to avoid data copying, the TCP/IP
86 * stack will use first part of the net_buf buffer to add it's data. This
87 * means that applications using TCP and/or UDP <b>must not</b> write
88 * application-level data from the beginning of the buffer but from certain
89 * offset. This offset depends on the transport-layer protocol (it's
90 * header size that is). For TCP this value is defined by the
91 * TCP_APP_OFFSET and for the UDP it is UDP_APP_OFFSET.
92 * \li <b>Buffer sharing</b> - since all applications share this buffer among each other,
93 * and with the TCP/IP stack as well, care must be taken not to
94 * overwrite other applications' data before it is sent. This is best
95 * achieved if all applications work in the main loop and when they
96 * wish to send data they fill in the buffer and send it immediately.
97 *
98 */
99 UINT8 net_buf[NETWORK_TX_BUFFER_SIZE]; /* Network transmit buffer */
100
101 /********************************************************************************
102 Function: strlen
103
104 Parameters: UINT8* str - start address of string buffer
105 UINT16 len - buffer length
106
107 Return val: INT16 - (-1) Not a string
108 (>=0) Length of string
109
C51 COMPILER V7.06 SYSTEM 11/26/2004 11:32:44 PAGE 3
110 Date: 12.8.2002
111
112 Desc: Calculates the length of given string
113 *********************************************************************************/
114
115
116 INT16 strlen (UINT8* buf, UINT16 len)
117 {
118 UINT16 i;
119
120 for(i=0; i<len; i++) {
121 if(*buf == '\0')
122 return( i );
123
124 buf++;
125 }
126
127 /* Not found */
128
129 return(-1);
130
131
132 }
133
134
135 /********************************************************************************
136 Function: bufsearch
137
138 Parameters: UINT8* startadr - start address of given buffer
139 UINT16 len - buffer length
140 UINT8* str - given searchstring
141
142 Return val: INT16 - (-1) Not found
143 (>=0) Start of matched string from startadr
144
145 Date: 12.7.2002
146
147 Desc: Seeks given string from given buffer
148 *********************************************************************************/
149
150 INT16 bufsearch (UINT8* startadr, UINT16 len, UINT8* str)
151 {
152 UINT16 i;
153 INT16 position;
154 UINT8 matchesneeded;
155 UINT8 matchesnow;
156 UINT8* target;
157 UINT8* key;
158
159 target = startadr;
160 position = -1;
161 key = str;
162 matchesnow = 0;
163 matchesneeded = 0;
164
165 /* How many matches we need? */
166
167 while( *key++ != '\0' ) {
168 /* Break possible deadlock */
169
170 matchesneeded++;
171 if(matchesneeded > 30)
C51 COMPILER V7.06 SYSTEM 11/26/2004 11:32:44 PAGE 4
172 return(-1);
173 }
174
175 /* Search for first mark and continue searching if found */
176
177 key = str;
178
179 for(i=0; i<len; i++) {
180 if( *target == *key) {
181 /* We found matching character */
182
183 matchesnow++;
184
185 /* Move to next character of key */
186
187 key++;
188 target++;
189
190 if(matchesnow == 1) {
191 /* First character match */
192
193 position = i;
194 }
195
196 if(matchesneeded == matchesnow) {
197 /* Whole string matched */
198
199 return(position);
200 }
201
202 } else {
203
204 if( matchesnow != 0) {
205 /* It wasn't a complete match... */
206 /* Initialize counters and start again */
207
208 matchesnow = 0;
209 key = str;
210
211 /* Move to next character of target after */
212 /* previous matching character */
213
214 target = startadr;
215 target += position;
216 target += 1;
217
218 i = position;
219 } else {
220 /* Just continue searching the first match */
221 target++;
222 }
223 }
224
225 }
226
227 /* No matches found... */
228
229 return(-1);
230
231 }
232
233
C51 COMPILER V7.06 SYSTEM 11/26/2004 11:32:44 PAGE 5
234 /********************************************************************************
235 Function: tolower
236
237 Parameters: UINT8 ch - ASCII character to be converted lowercase
238
239 Return val: UINT8 - converted character
240
241 Date: 21.8.2002
242
243 Desc: If ch is UPPERCASE letter it is converted to lowercase and
244 returned. Otherwise original character is returned
245 *********************************************************************************/
246
247 UINT8 tolower (UINT8 ch)
248 {
249 if( (ch < 91) && (ch > 64) )
250 return(ch + 32);
251
252 return(ch);
253
254 }
255
256
257 /********************************************************************************
258 Function: toupper
259
260 Parameters: UINT8 ch - ASCII character to be converted UPPERCASE
261
262 Return val: UINT8 - converted character
263
264 Date: 21.8.2002
265
266 Desc: If ch is lowercase letter it is converted to UPPERCASE and
267 returned. Otherwise original character is returned
268 *********************************************************************************/
269
270 UINT8 toupper (UINT8 ch)
271 {
272 if( (ch < 123) && (ch > 96) )
273 return(ch - 32);
274
275 return(ch);
276
277 }
278
279 /* Is the given ASCII code numerical */
280 /* e.g. '0','1','2' ... '9' */
281
282 UINT8 isnumeric (UINT8 ch)
283 {
284 if( (ch < 58) && (ch > 47) )
285 return(1);
286 return(0);
287 }
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -