?? tpbulk.c
字號:
/*
//*************************************************************************
//
// P H I L I P S P R O P R I E T A R Y
//
// COPYRIGHT (c) 1999 BY PHILIPS SINGAPORE.
// -- ALL RIGHTS RESERVED --
//
// File Name: TPBulk.C
// Author: ZhenYu Zhang
// Created: Nov. 26, 1999
// Modified:
// Revision: 0.0
//
//*************************************************************************
//
// USB Mass Storage
// Class Spec 1.0 Oct. 1998
// Bulk Only Transport 1.0 Jun.21 1999
//
// Notes:
// 3. Share Mem between CBW & CSW to minimize Operations as well as RAM
// 2. CSW structure size is 13[0xd] bytes
// 1. bInterfaceProtocol for Bulk-Only Transport
// 0x50 = 'P'
//
//
//
*/
#include <reg51.h> /* special function register declarations */
#undef GLOBAL_EXT
#include "SysCnfg.h"
#include "BasicTyp.h"
#include "usb100.h"
#include "common.h"
#include "Hal4Sys.h"
#include "Hal4d12.h"
#include "ATA.h"
#include "RBCCmd.h"
#include "RBC.h"
#include "HAL4ATA.h"
#include "MainLoop.h"
#include "Chap_9.h"
#include "TPBulk.h"
/*
//*************************************************************************
// Public Data
//*************************************************************************
*/
// bit Flags
STRUC_EXT BITFLAGS BDATA_SEG bFlags;
// MCU Timer bit flags
BIT_EXT MCUBF_Timer;
INT8_EXT Hal4Sys_ClockTicks;
// D12 bit flags
BIT_EXT D12BF_SetupOverwritten;
BIT_EXT D12BF_Configuration;
//USB
// DefaultControlPipe Finite State Machine [One-Hot]
INT8_EXT BDATA_SEG DCPFSMstate;
BIT_EXT DCPFSM_SetupProc;
BIT_EXT DCPFSM_DataIn;
BIT_EXT DCPFSM_DataOut;
BIT_EXT DCPFSM_COhandshake;
BIT_EXT DCPFSM_CIhandshake;
BIT_EXT DCPFSM_Stall;
// DCP FSM
// SETUP Stage -> SETUP Proc -> DATA OUT Stage -> CONTROL OUT Handshake -> STATUS Stage -> IDLE
// SETUP Stage -> SETUP Proc -> CONTROL OUT Handshake -> STATUS Stage -> IDLE
// SETUP Stage -> SETUP Proc -> DATA IN Stage-> CONTROL IN Handshake ->STATUS Stage -> IDLE
//
INT16_EXT DCPXfer_wResidue;
INT8_EXT * DCPXfer_pData;
// USB Device Request
STRUC_EXT DEVICE_REQUEST DCPDeviceRequest;
INT8_EXT UsbReq_Recipient;
INT8_EXT UsbReq_Type;
INT8_EXT UsbReq_Request;
BIT_EXT REQBF_DCPRequest_dir;
BIT_EXT REQBF_StallDCPRequest;
BIT_EXT REQBF_DCPRequest_EPdir;
// Bulk-Only TP Finite State Machine [One-Hot]
INT8_EXT BDATA_SEG BOTFSMstate;
BIT_EXT BOTFSM_CBWProc;
BIT_EXT BOTFSM_DataIn;
BIT_EXT BOTFSM_DataOut;
BIT_EXT BOTFSM_CSWProc;
BIT_EXT BOTFSM_CSW;
BIT_EXT BOTFSM_IDLE;
BIT_EXT BOTFSM_Stall;
// BOT FSM
// IDLE Stage -> CBW -> CBW Proc -> DATA OUT Stage -> CSW Proc -> CSW Stage -> IDLE
// IDLE Stage -> CBW -> CBW Proc -> DATA IN Stage -> CSW Proc -> CSW Stage -> IDLE
// STALL Stage -> IDLE
//
INT16_EXT BOTXfer_wResidue;
INT8_EXT * BOTXfer_pData;
//INT8_EXT * BOTXfer_pData;
STRUC_EXT TPBLK_STRUC DATA_SEG TPBulk_Block;
#define TPBulk_CBW TPBulk_Block.TPBulk_CommandBlock
#define RBC_CDB TPBulk_CBW.cdbRBC
#define RBC_LUN TPBulk_CBW.bCBW_LUN
#define TPBulk_CSW TPBulk_Block.TPBulk_CommandStatus
BIT_EXT BOTXfer_Abort;
BIT_EXT BOTBF_StallAtBulkOut;
BIT_EXT BOTBF_StallAtBulkIn;
// XferSpace
INT8_EXT BDATA_SEG Xfer_Space;
// DCPXfer space
BIT_EXT DCPXfer_atMCUCODE;
BIT_EXT DCPXfer_atMCURAM;
BIT_EXT DCPXfer_atEEROM;
BIT_EXT DCPXfer_atATA;
// Bulk Only Tranport Xfer Space
BIT_EXT BOTXfer_atRAM;
BIT_EXT BOTXfer_atATA;
BIT_EXT BOTXfer_atROM;
/*
//*************************************************************************
// Public temp var
//*************************************************************************
*/
// Public temp var
STRUC_EXT FLEXI_INT32 tempvars4UsbReq;
INT8_EXT BDATA_SEG FlexByte;
BIT_EXT FlexByte_b0 ;
BIT_EXT FlexByte_b1;
BIT_EXT FlexByte_b2;
BIT_EXT FlexByte_b3;
BIT_EXT FlexByte_b4;
BIT_EXT FlexByte_b5;
BIT_EXT FlexByte_b6;
BIT_EXT FlexByte_b7;
STRUC_EXT HW_ATA_DEVICES_EXTENSION Hal4ATA_DevExt;
/*
//*************************************************************************
// Private Data
//*************************************************************************
*/
/*
//*************************************************************************
// Class Request Subroutines
// Public Functions
//*************************************************************************
*/
#define USB_CLASS_REQUEST_USBSTOR_RESET 0xFF
#define USB_CLASS_REQUEST_USBSTOR_GETMAXLUN 0xFE
/*
//*************************************************************************
//Bulk-Only TP-Bulk Hanlder
//*************************************************************************
*/
void TPBulk_CBWHandler( void )
{
//如果接收到的數據的長度與CBW長度一致,
if( sizeof(CBW) == Hal4D12_ReadEndpoint(4,EP2_PACKET_SIZE,(PINT8)&(TPBulk_CBW)) )
{
if(TPBulksup_IsCBWValid())
{
RBC_Handler(); //有效CBW，命令處理
return;
}
}
TPBulksup_ErrorHandler(CASECBW,0); //無效CBW，錯誤處理
TPBulk_CSWHandler();// Goto USBFSM4BOT_CSWPROC;
}
void
TPBulksup_ErrorHandler(INT8 HostDevCase,INT16 wByteCounterDevWillXfer)
{
TPBulk_CSW.dCSW_DataResidue = TPBulk_CBW.dCBW_DataXferLen - wByteCounterDevWillXfer;
switch(HostDevCase)
{
case CASEOK:
case CASE1: /* Hn=Dn*/
case CASE6: /* Hi=Di*/
TPBulk_CSW.bCSW_Status = CSW_GOOD;
break;
case CASE12: /* Ho=Do*/
TPBulk_CSW.bCSW_Status = CSW_GOOD;
break;
case CASE2: /* Hn<Di*/
case CASE3: /* Hn<Do*/
//BOTBF_StallAtBulkIn = 1; // may or may-not
TPBulk_CSW.bCSW_Status = CSW_PHASE_ERROR;
break;
case CASE4: /* Hi>Dn*/
case CASE5: /* Hi>Di*/
BOTBF_StallAtBulkIn = 1;
TPBulk_CSW.bCSW_Status = CSW_FAIL;//CSW_GOOD or CSW_FAIL
break;
case CASE7: /* Hi<Di*/
case CASE8: /* Hi<>Do */
//BOTBF_StallAtBulkIn = 1; // may or may-not
TPBulk_CSW.bCSW_Status = CSW_PHASE_ERROR;
break;
case CASE9: /* Ho>Dn*/
case CASE11: /* Ho>Do*/
//BOTBF_StallAtBulkOut = 1; // may or may-not
TPBulk_CSW.bCSW_Status = CSW_FAIL;//CSW_GOOD or CSW_FAIL
break;
case CASE10: /* Ho<>Di */
case CASE13: /* Ho<Do*/
//TBF_StallAtBulkIn = 1;// may or may-not
//TBF_StallAtBulkOut = 1;// may or may-not
TPBulk_CSW.bCSW_Status = CSW_PHASE_ERROR;
break;
case CASECBW: /* invalid CBW */
//BOTBF_StallAtBulkIn = 1; //
//BOTBF_StallAtBulkOut = 1;
TPBulk_CSW.bCSW_Status = CSW_PHASE_ERROR;
break;
case CASECMDFAIL:
BOTBF_StallAtBulkIn = 1;
TPBulk_CSW.bCSW_Status = CSW_FAIL;
break;
default:
break;
}
TPBulk_CSW.dCSW_Signature = CSW_SIGNATURE; //0x55534253 CSW后固有的特征碼
}
void TPBulk_CSWHandler( void ) //CSW處于理
{
if(BOTBF_StallAtBulkIn)
{
Hal4D12_SetEndpointStatus(5,1); //Bulk-In設置端點5狀態為停止
TPBulk_CSW.dCSW_DataResidue += BOTXfer_wResidue;
TPBulk_CSW.dCSW_DataResidue = Hal4Sys_SwapINT32(TPBulk_CSW.dCSW_DataResidue);
Xfer_Space &= BOTXFERSPACE_MASK;
BOTXfer_atRAM = 1;
BOTXfer_pData = (PINT8) &TPBulk_CSW; // CSW數據指針
BOTXfer_wResidue = sizeof(CSW); // CSW包的數據長度
BOTFSMstate = USBFSM4BOT_CSW; // 設置CSW包傳輸標志位
}
else if(BOTBF_StallAtBulkOut)
{
Hal4D12_SetEndpointStatus(4,1); //Bulk-Out設置端點4狀態為停止
BOTFSMstate = USBFSM4BOT_STALL; // 設置端點4空閑標志位
}
else
{
TPBulk_CSW.dCSW_DataResidue += BOTXfer_wResidue;
TPBulk_CSW.dCSW_DataResidue = Hal4Sys_SwapINT32(TPBulk_CSW.dCSW_DataResidue); // 轉換數據格式
Xfer_Space &= BOTXFERSPACE_MASK; // 清各傳輸地址標志位
BOTXfer_atRAM = 1; // 從RAM傳輸數據
BOTXfer_pData = (PINT8) &TPBulk_CSW; // 設置CSW包數據指針
BOTXfer_wResidue = sizeof(CSW); // CSW包數據長度
BOTFSMstate = USBFSM4BOT_CSW; // 設置CSW包傳輸標志位
}
}
/*
//*************************************************************************
//Bulk-Only TP - Class Request Handler
//*************************************************************************
*/
void TPBulk_ResetATA(void)
{
Hal4ATA_IdeHardReset(); //IDE硬件復位
Chap9sup_SingleTransmitEP0(0,0);
}
void TPBulk_GetMaxLUN(void) //
{
// INT8 c = 0;
// Chap9sup_SingleTransmitEP0(&c,1);
Hal4D12_StallEP0(); //設端點0 停止
}
/*
//*************************************************************************
//Bulk Only Transport support functions
//*************************************************************************
*/
INT8 TPBulksup_ReadFrBOEP(INT8 Length) //批量讀取數據
{
if(Length>EP2_PACKET_SIZE)
Length = EP2_PACKET_SIZE;
if( BOTXfer_atROM )
Length = Hal4D12_ReadEPAtCode(4,Length); //讀取數據到ROM（實際丟棄）
else if(BOTXfer_atRAM)
Length = Hal4D12_ReadEndpoint(4,Length,BOTXfer_pData);
return Length; //返回已讀數據長度
}
INT8 TPBulksup_WriteToBIEP(INT8 Length) //批量發送數據
{
if(Length > EP2_PACKET_SIZE)
Length = EP2_PACKET_SIZE;
if( BOTXfer_atROM )
Length = Hal4D12_WriteEPAtCode(5,Length,BOTXfer_pData);
else if(BOTXfer_atRAM)
Length = Hal4D12_WriteEndpoint(5,Length,BOTXfer_pData );
return Length; //返回已寫數據長度
}
BOOLEAN TPBulksup_IsCBWValid( void) //CBW是否有效,效檢
{
TPBulk_CBW.dCBW_DataXferLen = Hal4Sys_SwapINT32(TPBulk_CBW.dCBW_DataXferLen);
if( TPBulk_CBW.dCBW_Signature == CBW_SIGNATURE \
&& TPBulk_CBW.bCBW_LUN <= 1 \
&& TPBulk_CBW.bCBW_CDBLen <= MAX_CDBLEN )
return(1); //有效返回1
else
return(0); //無效返回0
}?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -