/* *	$Id: header.h,v 1.3 1999/04/26 19:46:02 mj Exp $ * *	The PCI Library -- PCI Header Structure (extracted from <linux/pci.h>) * *	Copyright (c) 1997--1999 Martin Mares <mj@atrey.karlin.mff.cuni.cz> * *	Can be freely distributed and used under the terms of the GNU GPL. *//* * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */#define PCI_VENDOR_ID		0x00	/* 16 bits */#define PCI_DEVICE_ID		0x02	/* 16 bits */#define PCI_COMMAND		0x04	/* 16 bits */#define  PCI_COMMAND_IO		0x1	/* Enable response in I/O space */#define  PCI_COMMAND_MEMORY	0x2	/* Enable response in Memory space */#define  PCI_COMMAND_MASTER	0x4	/* Enable bus mastering */#define  PCI_COMMAND_SPECIAL	0x8	/* Enable response to special cycles */#define  PCI_COMMAND_INVALIDATE	0x10	/* Use memory write and invalidate */#define  PCI_COMMAND_VGA_PALETTE 0x20	/* Enable palette snooping */#define  PCI_COMMAND_PARITY	0x40	/* Enable parity checking */#define  PCI_COMMAND_WAIT 	0x80	/* Enable address/data stepping */#define  PCI_COMMAND_SERR	0x100	/* Enable SERR */#define  PCI_COMMAND_FAST_BACK	0x200	/* Enable back-to-back writes */#define PCI_STATUS		0x06	/* 16 bits */#define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */#define  PCI_STATUS_66MHZ	0x20	/* Support 66 Mhz PCI 2.1 bus */#define  PCI_STATUS_UDF		0x40	/* Support User Definable Features */#define  PCI_STATUS_FAST_BACK	0x80	/* Accept fast-back to back */#define  PCI_STATUS_PARITY	0x100	/* Detected parity error */#define  PCI_STATUS_DEVSEL_MASK	0x600	/* DEVSEL timing */#define  PCI_STATUS_DEVSEL_FAST	0x000	#define  PCI_STATUS_DEVSEL_MEDIUM 0x200#define  PCI_STATUS_DEVSEL_SLOW 0x400#define  PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */#define  PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */#define  PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */#define  PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */#define  PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */#define PCI_CLASS_REVISION	0x08	/* High 24 bits are class, low 8					   revision */#define PCI_REVISION_ID         0x08    /* Revision ID */#define PCI_CLASS_PROG          0x09    /* Reg. Level Programming Interface */#define PCI_CLASS_DEVICE        0x0a    /* Device class */#define PCI_CACHE_LINE_SIZE	0x0c	/* 8 bits */#define PCI_LATENCY_TIMER	0x0d	/* 8 bits */#define PCI_HEADER_TYPE		0x0e	/* 8 bits */#define  PCI_HEADER_TYPE_NORMAL	0#define  PCI_HEADER_TYPE_BRIDGE 1#define  PCI_HEADER_TYPE_CARDBUS 2#define PCI_BIST		0x0f	/* 8 bits */#define PCI_BIST_CODE_MASK	0x0f	/* Return result */#define PCI_BIST_START		0x40	/* 1 to start BIST, 2 secs or less */#define PCI_BIST_CAPABLE	0x80	/* 1 if BIST capable *//* * Base addresses specify locations in memory or I/O space. * Decoded size can be determined by writing a value of  * 0xffffffff to the register, and reading it back.  Only  * 1 bits are decoded. */#define PCI_BASE_ADDRESS_0	0x10	/* 32 bits */#define PCI_BASE_ADDRESS_1	0x14	/* 32 bits [htype 0,1 only] */#define PCI_BASE_ADDRESS_2	0x18	/* 32 bits [htype 0 only] */#define PCI_BASE_ADDRESS_3	0x1c	/* 32 bits */#define PCI_BASE_ADDRESS_4	0x20	/* 32 bits */#define PCI_BASE_ADDRESS_5	0x24	/* 32 bits */#define  PCI_BASE_ADDRESS_SPACE	0x01	/* 0 = memory, 1 = I/O */#define  PCI_BASE_ADDRESS_SPACE_IO 0x01#define  PCI_BASE_ADDRESS_SPACE_MEMORY 0x00#define  PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06#define  PCI_BASE_ADDRESS_MEM_TYPE_32	0x00	/* 32 bit address */#define  PCI_BASE_ADDRESS_MEM_TYPE_1M	0x02	/* Below 1M */#define  PCI_BASE_ADDRESS_MEM_TYPE_64	0x04	/* 64 bit address */#define  PCI_BASE_ADDRESS_MEM_PREFETCH	0x08	/* prefetchable? */#define  PCI_BASE_ADDRESS_MEM_MASK	(~0x0fL)#define  PCI_BASE_ADDRESS_IO_MASK	(~0x03L)/* bit 1 is reserved if address_space = 1 *//* Header type 0 (normal devices) */#define PCI_CARDBUS_CIS		0x28#define PCI_SUBSYSTEM_VENDOR_ID	0x2c#define PCI_SUBSYSTEM_ID	0x2e  #define PCI_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */#define  PCI_ROM_ADDRESS_ENABLE	0x01#define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)#define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry *//* 0x35-0x3b are reserved */#define PCI_INTERRUPT_LINE	0x3c	/* 8 bits */#define PCI_INTERRUPT_PIN	0x3d	/* 8 bits */#define PCI_MIN_GNT		0x3e	/* 8 bits */#define PCI_MAX_LAT		0x3f	/* 8 bits *//* Header type 1 (PCI-to-PCI bridges) */#define PCI_PRIMARY_BUS		0x18	/* Primary bus number */#define PCI_SECONDARY_BUS	0x19	/* Secondary bus number */#define PCI_SUBORDINATE_BUS	0x1a	/* Highest bus number behind the bridge */#define PCI_SEC_LATENCY_TIMER	0x1b	/* Latency timer for secondary interface */#define PCI_IO_BASE		0x1c	/* I/O range behind the bridge */#define PCI_IO_LIMIT		0x1d#define  PCI_IO_RANGE_TYPE_MASK	0x0f	/* I/O bridging type */#define  PCI_IO_RANGE_TYPE_16	0x00#define  PCI_IO_RANGE_TYPE_32	0x01#define  PCI_IO_RANGE_MASK	~0x0f#define PCI_SEC_STATUS		0x1e	/* Secondary status register, only bit 14 used */#define PCI_MEMORY_BASE		0x20	/* Memory range behind */#define PCI_MEMORY_LIMIT	0x22#define  PCI_MEMORY_RANGE_TYPE_MASK 0x0f#define  PCI_MEMORY_RANGE_MASK	~0x0f#define PCI_PREF_MEMORY_BASE	0x24	/* Prefetchable memory range behind */#define PCI_PREF_MEMORY_LIMIT	0x26#define  PCI_PREF_RANGE_TYPE_MASK 0x0f#define  PCI_PREF_RANGE_TYPE_32	0x00#define  PCI_PREF_RANGE_TYPE_64	0x01#define  PCI_PREF_RANGE_MASK	~0x0f#define PCI_PREF_BASE_UPPER32	0x28	/* Upper half of prefetchable memory range */#define PCI_PREF_LIMIT_UPPER32	0x2c#define PCI_IO_BASE_UPPER16	0x30	/* Upper half of I/O addresses */#define PCI_IO_LIMIT_UPPER16	0x32/* 0x34-0x3b is reserved */#define PCI_ROM_ADDRESS1	0x38	/* Same as PCI_ROM_ADDRESS, but for htype 1 *//* 0x3c-0x3d are same as for htype 0 */#define PCI_BRIDGE_CONTROL	0x3e#define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */#define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */#define  PCI_BRIDGE_CTL_NO_ISA	0x04	/* Disable bridging of ISA ports */#define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */#define  PCI_BRIDGE_CTL_MASTER_ABORT 0x20  /* Report master aborts */#define  PCI_BRIDGE_CTL_BUS_RESET 0x40	/* Secondary bus reset */#define  PCI_BRIDGE_CTL_FAST_BACK 0x80	/* Fast Back2Back enabled on secondary interface *//* Header type 2 (CardBus bridges) *//* 0x14-0x15 reserved */#define PCI_CB_SEC_STATUS	0x16	/* Secondary status */#define PCI_CB_PRIMARY_BUS	0x18	/* PCI bus number */#define PCI_CB_CARD_BUS		0x19	/* CardBus bus number */#define PCI_CB_SUBORDINATE_BUS	0x1a	/* Subordinate bus number */#define PCI_CB_LATENCY_TIMER	0x1b	/* CardBus latency timer */#define PCI_CB_MEMORY_BASE_0	0x1c#define PCI_CB_MEMORY_LIMIT_0	0x20#define PCI_CB_MEMORY_BASE_1	0x24#define PCI_CB_MEMORY_LIMIT_1	0x28#define PCI_CB_IO_BASE_0	0x2c#define PCI_CB_IO_BASE_0_HI	0x2e#define PCI_CB_IO_LIMIT_0	0x30#define PCI_CB_IO_LIMIT_0_HI	0x32#define PCI_CB_IO_BASE_1	0x34#define PCI_CB_IO_BASE_1_HI	0x36#define PCI_CB_IO_LIMIT_1	0x38#define PCI_CB_IO_LIMIT_1_HI	0x3a#define  PCI_CB_IO_RANGE_MASK	~0x03/* 0x3c-0x3d are same as for htype 0 */#define PCI_CB_BRIDGE_CONTROL	0x3e#define  PCI_CB_BRIDGE_CTL_PARITY	0x01	/* Similar to standard bridge control register */#define  PCI_CB_BRIDGE_CTL_SERR		0x02#define  PCI_CB_BRIDGE_CTL_ISA		0x04#define  PCI_CB_BRIDGE_CTL_VGA		0x08#define  PCI_CB_BRIDGE_CTL_MASTER_ABORT	0x20#define  PCI_CB_BRIDGE_CTL_CB_RESET	0x40	/* CardBus reset */#define  PCI_CB_BRIDGE_CTL_16BIT_INT	0x80	/* Enable interrupt for 16-bit cards */#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100	/* Prefetch enable for both memory regions */#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200#define  PCI_CB_BRIDGE_CTL_POST_WRITES	0x400#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40#define PCI_CB_SUBSYSTEM_ID	0x42#define PCI_CB_LEGACY_MODE_BASE	0x44	/* 16-bit PC Card legacy mode base address (ExCa) *//* 0x48-0x7f reserved *//* Capability lists */#define PCI_CAP_LIST_ID		0	/* Capability ID */#define  PCI_CAP_ID_PM		0x01	/* Power Management */#define  PCI_CAP_ID_AGP		0x02	/* Accelerated Graphics Port */#define PCI_CAP_LIST_NEXT	1	/* Next capability in the list */#define PCI_CAP_FLAGS		2	/* Capability defined flags (16 bits) */#define PCI_CAP_SIZEOF		4/* Power Management Registers */#define  PCI_PM_CAP_VER_MASK	0x0007	/* Version */#define  PCI_PM_CAP_PME_CLOCK	0x0008	/* PME clock required */#define  PCI_PM_CAP_AUX_POWER	0x0010	/* Auxilliary power support */#define  PCI_PM_CAP_DSI		0x0020	/* Device specific initialization */#define  PCI_PM_CAP_D1		0x0200	/* D1 power state support */#define  PCI_PM_CAP_D2		0x0400	/* D2 power state support */#define  PCI_PM_CAP_PME		0x0800	/* PME pin supported */#define PCI_PM_CTRL		4	/* PM control and status register */#define  PCI_PM_CTRL_STATE_MASK	0x0003	/* Current power state (D0 to D3) */#define  PCI_PM_CTRL_PME_ENABLE	0x0100	/* PME pin enable */#define  PCI_PM_CTRL_DATA_SEL_MASK	0x1e00	/* Data select (??) */#define  PCI_PM_CTRL_DATA_SCALE_MASK	0x6000	/* Data scale (??) */#define  PCI_PM_CTRL_PME_STATUS	0x8000	/* PME pin status */#define PCI_PM_PPB_EXTENSIONS	6	/* PPB support extensions (??) */#define  PCI_PM_PPB_B2_B3	0x40	/* Stop clock when in D3hot (??) */#define  PCI_PM_BPCC_ENABLE	0x80	/* Bus power/clock control enable (??) */#define PCI_PM_DATA_REGISTER	7	/* (??) */#define PCI_PM_SIZEOF		8/* AGP registers */#define PCI_AGP_VERSION		2	/* BCD version number */#define PCI_AGP_RFU		3	/* Rest of capability flags */#define PCI_AGP_STATUS		4	/* Status register */#define  PCI_AGP_STATUS_RQ_MASK	0xff000000	/* Maximum number of requests - 1 */#define  PCI_AGP_STATUS_SBA	0x0200	/* Sideband addressing supported */#define  PCI_AGP_STATUS_64BIT	0x0020	/* 64-bit addressing supported */#define  PCI_AGP_STATUS_FW	0x0010	/* FW transfers supported */#define  PCI_AGP_STATUS_RATE4	0x0004	/* 4x transfer rate supported */#define  PCI_AGP_STATUS_RATE2	0x0002	/* 2x transfer rate supported */#define  PCI_AGP_STATUS_RATE1	0x0001	/* 1x transfer rate supported */#define PCI_AGP_COMMAND		8	/* Control register */#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */#define  PCI_AGP_COMMAND_SBA	0x0200	/* Sideband addressing enabled */#define  PCI_AGP_COMMAND_AGP	0x0100	/* Allow processing of AGP transactions */#define  PCI_AGP_COMMAND_64BIT	0x0020 	/* Allow processing of 64-bit addresses */#define  PCI_AGP_COMMAND_FW	0x0010 	/* Force FW transfers */#define  PCI_AGP_COMMAND_RATE4	0x0004	/* Use 4x rate */#define  PCI_AGP_COMMAND_RATE2	0x0002	/* Use 4x rate */#define  PCI_AGP_COMMAND_RATE1	0x0001	/* Use 4x rate */#define PCI_AGP_SIZEOF		12/* * The PCI interface treats multi-function devices as independent * devices.  The slot/function address of each device is encoded * in a single byte as follows: * *	7:3 = slot *	2:0 = function */#define PCI_DEVFN(slot,func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)#define PCI_FUNC(devfn)		((devfn) & 0x07)/* Device classes and subclasses */#define PCI_CLASS_NOT_DEFINED		0x0000#define PCI_CLASS_NOT_DEFINED_VGA	0x0001#define PCI_BASE_CLASS_STORAGE		0x01#define PCI_CLASS_STORAGE_SCSI		0x0100#define PCI_CLASS_STORAGE_IDE		0x0101#define PCI_CLASS_STORAGE_FLOPPY	0x0102#define PCI_CLASS_STORAGE_IPI		0x0103#define PCI_CLASS_STORAGE_RAID		0x0104#define PCI_CLASS_STORAGE_OTHER		0x0180#define PCI_BASE_CLASS_NETWORK		0x02#define PCI_CLASS_NETWORK_ETHERNET	0x0200#define PCI_CLASS_NETWORK_TOKEN_RING	0x0201#define PCI_CLASS_NETWORK_FDDI		0x0202#define PCI_CLASS_NETWORK_ATM		0x0203#define PCI_CLASS_NETWORK_OTHER		0x0280#define PCI_BASE_CLASS_DISPLAY		0x03#define PCI_CLASS_DISPLAY_VGA		0x0300#define PCI_CLASS_DISPLAY_XGA		0x0301#define PCI_CLASS_DISPLAY_OTHER		0x0380#define PCI_BASE_CLASS_MULTIMEDIA	0x04#define PCI_CLASS_MULTIMEDIA_VIDEO	0x0400#define PCI_CLASS_MULTIMEDIA_AUDIO	0x0401#define PCI_CLASS_MULTIMEDIA_OTHER	0x0480#define PCI_BASE_CLASS_MEMORY		0x05#define  PCI_CLASS_MEMORY_RAM		0x0500#define  PCI_CLASS_MEMORY_FLASH		0x0501#define  PCI_CLASS_MEMORY_OTHER		0x0580#define PCI_BASE_CLASS_BRIDGE		0x06#define  PCI_CLASS_BRIDGE_HOST		0x0600#define  PCI_CLASS_BRIDGE_ISA		0x0601#define  PCI_CLASS_BRIDGE_EISA		0x0602#define  PCI_CLASS_BRIDGE_MC		0x0603#define  PCI_CLASS_BRIDGE_PCI		0x0604#define  PCI_CLASS_BRIDGE_PCMCIA	0x0605#define  PCI_CLASS_BRIDGE_NUBUS		0x0606#define  PCI_CLASS_BRIDGE_CARDBUS	0x0607#define  PCI_CLASS_BRIDGE_OTHER		0x0680#define PCI_BASE_CLASS_COMMUNICATION	0x07#define PCI_CLASS_COMMUNICATION_SERIAL	0x0700#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701#define PCI_CLASS_COMMUNICATION_OTHER	0x0780#define PCI_BASE_CLASS_SYSTEM		0x08#define PCI_CLASS_SYSTEM_PIC		0x0800#define PCI_CLASS_SYSTEM_DMA		0x0801#define PCI_CLASS_SYSTEM_TIMER		0x0802#define PCI_CLASS_SYSTEM_RTC		0x0803#define PCI_CLASS_SYSTEM_OTHER		0x0880#define PCI_BASE_CLASS_INPUT		0x09#define PCI_CLASS_INPUT_KEYBOARD	0x0900#define PCI_CLASS_INPUT_PEN		0x0901#define PCI_CLASS_INPUT_MOUSE		0x0902#define PCI_CLASS_INPUT_OTHER		0x0980#define PCI_BASE_CLASS_DOCKING		0x0a#define PCI_CLASS_DOCKING_GENERIC	0x0a00#define PCI_CLASS_DOCKING_OTHER		0x0a01#define PCI_BASE_CLASS_PROCESSOR	0x0b#define PCI_CLASS_PROCESSOR_386		0x0b00#define PCI_CLASS_PROCESSOR_486		0x0b01#define PCI_CLASS_PROCESSOR_PENTIUM	0x0b02#define PCI_CLASS_PROCESSOR_ALPHA	0x0b10#define PCI_CLASS_PROCESSOR_POWERPC	0x0b20#define PCI_CLASS_PROCESSOR_CO		0x0b40#define PCI_BASE_CLASS_SERIAL		0x0c#define PCI_CLASS_SERIAL_FIREWIRE	0x0c00#define PCI_CLASS_SERIAL_ACCESS		0x0c01#define PCI_CLASS_SERIAL_SSA		0x0c02#define PCI_CLASS_SERIAL_USB		0x0c03#define PCI_CLASS_SERIAL_FIBER		0x0c04#define PCI_CLASS_OTHERS		0xff/* Several ID's we need in the library */#define PCI_VENDOR_ID_INTEL		0x8086#define PCI_VENDOR_ID_COMPAQ		0x0e11