/***********************************************
 * NAME    : 44BLIB.H                          *
 * Version : 17.Apr.00                         *
 ***********************************************/


#ifndef __44blib_h__
#define __44blib_h__

#ifdef __cplusplus
extern "C" {
#endif

#define DebugOut Uart_Printf

#define min(x1,x2) ((x1<x2)? x1:x2)
#define max(x1,x2) ((x1>x2)? x1:x2)

#define ONESEC0 (62500)	//16us resolution, max 1.04 sec
#define ONESEC1 (31250)	//32us resolution, max 2.09 sec
#define ONESEC2 (15625)	//64us resolution, max 4.19 sec
#define ONESEC3 (7812)	//128us resolution, max 8.38 sec
#define ONESEC4 (MCLK/128/(0xff+1))  //@60Mhz, 128*4us resolution, max 32.53 sec

#define NULL 0

#define EnterPWDN(clkcon) ((void (*)(int))0xe0)(clkcon)


/*44blib.c*/
void Delay(int time); //Watchdog Timer is used.

void *malloc(unsigned nbyte); 
void free(void *pt);

void Port_Init(void);
void Cache_Flush(void);
void Uart_Select(int ch);
void Uart_TxEmpty(int ch);
void Uart_Init(int mclk,int baud);
char Uart_Getch(void);
char Uart_GetKey(void);
int  Uart_GetIntNum(void);
void Uart_SendByte(int data);
void Uart_Printf(char *fmt,...);
void Uart_SendString(char *pt);
int getyorn(void);
#define	getch	Uart_Getch
#define	putch	Uart_SendByte
#define	puts	Uart_SendString
#define	printf	Uart_Printf

void Timer_Start(int divider); //Watchdog Timer is used.
int Timer_Stop(void);          //Watchdog Timer is used.

void Beep(unsigned int time);	//蜂鳴器鳴叫
void Key_Speaker(void);		//
void Led_Set(int LedStatus);		//四個LED 點亮/熄滅狀態設置
void Led_Disp(void);		//跑馬燈程序

void ChangePllValue(int m,int p,int s);

void ChangeMemCon(unsigned *pMemCfg);
void EnableInterrupt(void);
void DisableInterrupt(void);

#ifdef __cplusplus
}
#endif

#endif /*__44blib_h__*/