To write the CIS run (Without Card and socket services loaded !!):
WRITECIS SDUAL400.210 (or LDUAL400.210) <for dual function card 91C94/96 based>
WRITECIS SDUAL8k.210  (or LDUAL8K.210) <for dual function card 91C95 based>
WRITECIS SSINGLE.210  (or SSINGLE.21) <for single function card>

The following files, which use the LAN9000 name instead of SMC9000 have 
been added:
LDUAL400.210
LDUAL8K.210
LSINGLE.210
Be aware that drivers dated earlier than July '98 will not work with the 
new CISs. Any driver dated after July '98 will work with either the old 
or new CISs


Select from the menu the card you are programming.
Single function cards use option 1.
Dual function cards based on 91C94/96 use option 2.
Dual function cards based on 91C95 use option 3.

WARNING: The CIS was preprogrammed at SMC, you shouldn't need to do this
	 unless you want to change it. Also, by using the files provided
	 in this directory the Unique Node address currently written in 
	 the card's CIS  will be overwritten with:
		00800F000000	for single function cards
		00800F000001	for dual function cards
	 You can set each board's node address uniquely by editing
	 the CIS file and changing the number before programing each
	 board.

	 The files DUALXXXX.500 are 5.0 compliant CISs for the dual function 
	 card. All drivers found in this package are written for the 2.1
	 compliant CIS which makes them incompatible with the 5.0 ones. 
	 If you would like to use a card with a 5.0 CIS contact SMC 
	 Components Division for the proper drivers.