/* Remote debugging interface for AMD 29000 EBMON on IBM PC, for GDB.   Copyright 1990, 1991, 1992 Free Software Foundation, Inc.   Contributed by Cygnus Support.  Written by Jim Kingdon for Cygnus.This file is part of GDB.This program is free software; you can redistribute it and/or modifyit under the terms of the GNU General Public License as published bythe Free Software Foundation; either version 2 of the License, or(at your option) any later version.This program is distributed in the hope that it will be useful,but WITHOUT ANY WARRANTY; without even the implied warranty ofMERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See theGNU General Public License for more details.You should have received a copy of the GNU General Public Licensealong with this program; if not, write to the Free SoftwareFoundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  *//* This is like remote.c but is for an esoteric situation--   having a 29k board in a PC hooked up to a unix machine with   a serial line, and running ctty com1 on the PC, through which   the unix machine can run ebmon.  Not to mention that the PC   has PC/NFS, so it can access the same executables that gdb can,   over the net in real time.  */#define	 TM_FILE_OVERRIDE#include "defs.h"#include <string.h>#include "tm-29k.h"#include "inferior.h"#include "wait.h"#include "value.h"#include <ctype.h>#include <fcntl.h>#include <signal.h>#include <errno.h>#include "terminal.h"#include "target.h"#include "gdbcore.h"extern struct target_ops eb_ops;		/* Forward declaration */static void eb_close();#define LOG_FILE "eb.log"#if defined (LOG_FILE)FILE *log_file;#endifstatic int timeout = 24;/* Descriptor for I/O to remote machine.  Initialize it to -1 so that   eb_open knows that we don't have a file open when the program   starts.  */int eb_desc = -1;/* stream which is fdopen'd from eb_desc.  Only valid when   eb_desc != -1.  */FILE *eb_stream;/* Read a character from the remote system, doing all the fancy   timeout stuff.  */static intreadchar (){  char buf;  buf = '\0';#ifdef HAVE_TERMIO  /* termio does the timeout for us.  */  read (eb_desc, &buf, 1);#else  alarm (timeout);  if (read (eb_desc, &buf, 1) < 0)    {      if (errno == EINTR)	error ("Timeout reading from remote system.");      else	perror_with_name ("remote");    }  alarm (0);#endif  if (buf == '\0')    error ("Timeout reading from remote system.");#if defined (LOG_FILE)  putc (buf & 0x7f, log_file);#endif  return buf & 0x7f;}/* Keep discarding input from the remote system, until STRING is found.    Let the user break out immediately.  */static voidexpect (string)     char *string;{  char *p = string;  immediate_quit = 1;  while (1)    {      if (readchar() == *p)	{	  p++;	  if (*p == '\0')	    {	      immediate_quit = 0;	      return;	    }	}      else	p = string;    }}/* Keep discarding input until we see the ebmon prompt.   The convention for dealing with the prompt is that you   o give your command   o *then* wait for the prompt.   Thus the last thing that a procedure does with the serial line   will be an expect_prompt().  Exception:  eb_resume does not   wait for the prompt, because the terminal is being handed over   to the inferior.  However, the next thing which happens after that   is a eb_wait which does wait for the prompt.   Note that this includes abnormal exit, e.g. error().  This is   necessary to prevent getting into states from which we can't   recover.  */static voidexpect_prompt (){#if defined (LOG_FILE)  /* This is a convenient place to do this.  The idea is to do it often     enough that we never lose much data if we terminate abnormally.  */  fflush (log_file);#endif  expect ("\n# ");}/* Get a hex digit from the remote system & return its value.   If ignore_space is nonzero, ignore spaces (not newline, tab, etc).  */static intget_hex_digit (ignore_space)     int ignore_space;{  int ch;  while (1)    {      ch = readchar ();      if (ch >= '0' && ch <= '9')	return ch - '0';      else if (ch >= 'A' && ch <= 'F')	return ch - 'A' + 10;      else if (ch >= 'a' && ch <= 'f')	return ch - 'a' + 10;      else if (ch == ' ' && ignore_space)	;      else	{	  expect_prompt ();	  error ("Invalid hex digit from remote system.");	}    }}/* Get a byte from eb_desc and put it in *BYT.  Accept any number   leading spaces.  */static voidget_hex_byte (byt)     char *byt;{  int val;  val = get_hex_digit (1) << 4;  val |= get_hex_digit (0);  *byt = val;}/* Get N 32-bit words from remote, each preceded by a space,   and put them in registers starting at REGNO.  */static voidget_hex_regs (n, regno)     int n;     int regno;{  long val;  int i;  for (i = 0; i < n; i++)    {      int j;            val = 0;      for (j = 0; j < 8; j++)	val = (val << 4) + get_hex_digit (j == 0);      supply_register (regno++, &val);    }}/* Called when SIGALRM signal sent due to alarm() timeout.  */#ifndef HAVE_TERMIO#ifndef __STDC__#define volatile /**/#endifvolatile int n_alarms;voideb_timer (){#if 0  if (kiodebug)    printf ("eb_timer called\n");#endif  n_alarms++;}#endif/* malloc'd name of the program on the remote system.  */static char *prog_name = NULL;/* Nonzero if we have loaded the file ("yc") and not yet issued a "gi"   command.  "gi" is supposed to happen exactly once for each "yc".  */static int need_gi = 0;/* Number of SIGTRAPs we need to simulate.  That is, the next   NEED_ARTIFICIAL_TRAP calls to eb_wait should just return   SIGTRAP without actually waiting for anything.  */static int need_artificial_trap = 0;/* This is called not only when we first attach, but also when the   user types "run" after having attached.  */static voideb_create_inferior (execfile, args, env)     char *execfile;     char *args;     char **env;{  int entry_pt;  if (args && *args)    error ("Can't pass arguments to remote EBMON process");  if (execfile == 0 || exec_bfd == 0)    error ("No exec file specified");  entry_pt = (int) bfd_get_start_address (exec_bfd);#ifdef CREATE_INFERIOR_HOOK  CREATE_INFERIOR_HOOK (0);		/* No process-ID */#endif    {    /* OK, now read in the file.  Y=read, C=COFF, D=no symbols       0=start address, %s=filename.  */    fprintf (eb_stream, "YC D,0:%s", prog_name);    if (args != NULL)	fprintf(eb_stream, " %s", args);    fprintf (eb_stream, "\n");    fflush (eb_stream);    expect_prompt ();    need_gi = 1;  }/* The "process" (board) is already stopped awaiting our commands, and   the program is already downloaded.  We just set its PC and go.  */  clear_proceed_status ();  /* Tell wait_for_inferior that we've started a new process.  */  init_wait_for_inferior ();  /* Set up the "saved terminal modes" of the inferior     based on what modes we are starting it with.  */  target_terminal_init ();  /* Install inferior's terminal modes.  */  target_terminal_inferior ();  /* insert_step_breakpoint ();  FIXME, do we need this?  */  proceed ((CORE_ADDR)entry_pt, -1, 0);		/* Let 'er rip... */}/* Translate baud rates from integers to damn B_codes.  Unix should   have outgrown this crap years ago, but even POSIX wouldn't buck it.  */#ifndef B19200#define B19200 EXTA#endif#ifndef B38400#define B38400 EXTB#endifstruct {int rate, damn_b;} baudtab[] = {	{0, B0},	{50, B50},	{75, B75},	{110, B110},	{134, B134},	{150, B150},	{200, B200},	{300, B300},	{600, B600},	{1200, B1200},	{1800, B1800},	{2400, B2400},	{4800, B4800},	{9600, B9600},	{19200, B19200},	{38400, B38400},	{-1, -1},};int damn_b (rate)     int rate;{  int i;  for (i = 0; baudtab[i].rate != -1; i++)    if (rate == baudtab[i].rate) return baudtab[i].damn_b;  return B38400;	/* Random */}/* Open a connection to a remote debugger.   NAME is the filename used for communication, then a space,   then the name of the program as we should name it to EBMON.  */static int baudrate = 9600;static char *dev_name;voideb_open (name, from_tty)     char *name;     int from_tty;{  TERMINAL sg;  char *p;  target_preopen (from_tty);    /* Find the first whitespace character, it separates dev_name from     prog_name.  */  if (name == 0)    goto erroid;  for (p = name;       *p != '\0' && !isspace (*p); p++)    ;  if (*p == '\0')erroid:    error ("\Please include the name of the device for the serial port,\n\the baud rate, and the name of the program to run on the remote system.");  dev_name = alloca (p - name + 1);  strncpy (dev_name, name, p - name);  dev_name[p - name] = '\0';  /* Skip over the whitespace after dev_name */  for (; isspace (*p); p++)    /*EMPTY*/;    if (1 != sscanf (p, "%d ", &baudrate))    goto erroid;  /* Skip the number and then the spaces */  for (; isdigit (*p); p++)    /*EMPTY*/;  for (; isspace (*p); p++)    /*EMPTY*/;    if (prog_name != NULL)    free (prog_name);  prog_name = savestring (p, strlen (p));  eb_close (0);  eb_desc = open (dev_name, O_RDWR);  if (eb_desc < 0)    perror_with_name (dev_name);  ioctl (eb_desc, TIOCGETP, &sg);#ifdef HAVE_TERMIO  sg.c_cc[VMIN] = 0;		/* read with timeout.  */  sg.c_cc[VTIME] = timeout * 10;  sg.c_lflag &= ~(ICANON | ECHO);  sg.c_cflag = (sg.c_cflag & ~CBAUD) | damn_b (baudrate);#else  sg.sg_ispeed = damn_b (baudrate);  sg.sg_ospeed = damn_b (baudrate);  sg.sg_flags |= RAW | ANYP;  sg.sg_flags &= ~ECHO;#endif  ioctl (eb_desc, TIOCSETP, &sg);  eb_stream = fdopen (eb_desc, "r+");  push_target (&eb_ops);  if (from_tty)    printf ("Remote %s debugging %s using %s\n", target_shortname,	    prog_name, dev_name);#ifndef HAVE_TERMIO#ifndef NO_SIGINTERRUPT  /* Cause SIGALRM's to make reads fail with EINTR instead of resuming     the read.  */  if (siginterrupt (SIGALRM, 1) != 0)    perror ("eb_open: error in siginterrupt");#endif  /* Set up read timeout timer.  */  if ((void (*)) signal (SIGALRM, eb_timer) == (void (*)) -1)    perror ("eb_open: error in signal");#endif#if defined (LOG_FILE)  log_file = fopen (LOG_FILE, "w");  if (log_file == NULL)    perror_with_name (LOG_FILE);#endif  /* Hello?  Are you there?  */  write (eb_desc, "\n", 1);    expect_prompt ();}/* Close out all files and local state before this target loses control. */static voideb_close (quitting)     int quitting;{  /* Due to a bug in Unix, fclose closes not only the stdio stream,     but also the file descriptor.  So we don't actually close     eb_desc.  */  if (eb_stream)    fclose (eb_stream);	/* This also closes eb_desc */  if (eb_desc >= 0)    /* close (eb_desc); */  /* Do not try to close eb_desc again, later in the program.  */  eb_stream = NULL;  eb_desc = -1;#if defined (LOG_FILE)  if (log_file) {    if (ferror (log_file))      printf ("Error writing log file.\n");    if (fclose (log_file) != 0)      printf ("Error closing log file.\n");  }#endif}/* Terminate the open connection to the remote debugger.   Use this when you want to detach and do something else   with your gdb.  */voideb_detach (from_tty)     int from_tty;{  pop_target();		/* calls eb_close to do the real work */  if (from_tty)    printf ("Ending remote %s debugging\n", target_shortname);} /* Tell the remote machine to resume.  */voideb_resume (step, sig)     int step, sig;{  if (step)    {      write (eb_desc, "t 1,s\n", 6);      /* Wait for the echo.  */      expect ("t 1,s\r");      /* Then comes a line containing the instruction we stepped to.  */      expect ("\n@");      /* Then we get the prompt.  */      expect_prompt ();      /* Force the next eb_wait to return a trap.  Not doing anything         about I/O from the target means that the user has to type         "continue" to see any.  This should be fixed.  */      need_artificial_trap = 1;    }  else    {      if (need_gi)