/* -*- C -*- * main.c -- the bare scullp char module * * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet * Copyright (C) 2001 O'Reilly & Associates * * The source code in this file can be freely used, adapted, * and redistributed in source or binary form, so long as an * acknowledgment appears in derived source files.  The citation * should list that the code comes from the book "Linux Device * Drivers" by Alessandro Rubini and Jonathan Corbet, published * by O'Reilly & Associates.   No warranty is attached; * we cannot take responsibility for errors or fitness for use. * * $Id: _main.c.in,v 1.19 2001/07/18 22:28:18 rubini Exp $ */#ifndef __KERNEL__#  define __KERNEL__#endif#ifndef MODULE#  define MODULE#endif#include <linux/config.h>#include <linux/module.h>/* modversion stuff: no #ifdef needed if 2.0 support is not needed */#ifdef CONFIG_MODVERSIONS#  include <linux/modversions.h>#endif#include <linux/kernel.h> /* printk() */#include <linux/malloc.h> /* kmalloc() */#include <linux/fs.h>     /* everything... */#include <linux/errno.h>  /* error codes */#include <linux/types.h>  /* size_t */#include <linux/proc_fs.h>#include <linux/fcntl.h>        /* O_ACCMODE */#include <asm/system.h>   /* cli(), *_flags */#include "scullp.h"        /* local definitions *//* * I don't use static symbols here, because register_symtab is called */int scullp_major =   SCULLP_MAJOR;int scullp_devs =    SCULLP_DEVS;    /* number of bare scullp devices */int scullp_qset =    SCULLP_QSET;int scullp_order =   SCULLP_ORDER;MODULE_PARM(scullp_major, "i");MODULE_PARM(scullp_devs, "i");MODULE_PARM(scullp_qset, "i");MODULE_PARM(scullp_order, "i");MODULE_AUTHOR("Alessandro Rubini");ScullP_Dev *scullp_devices; /* allocated in scullp_init */int scullp_trim(ScullP_Dev *dev);#ifdef SCULLP_USE_PROC /* don't waste space if unused *//* * The proc filesystem: function to read and entry */void scullp_proc_offset(char *buf, char **start, off_t *offset, int *len){    if (*offset == 0)        return;    if (*offset >= *len) {      /* Not there yet */        *offset -= *len;        *len = 0;    }    else {                      /* We're into the interesting stuff now */        *start = buf + *offset;        *offset = 0;    }}int scullp_read_procmem(char *buf, char **start, off_t offset,                   int count, int *eof, void *data){    int i, j, order, qset, len = 0;    int limit = count - 80; /* Don't print more than this */    ScullP_Dev *d;    *start = buf;    for(i=0; i<scullp_devs; i++) {        d=&scullp_devices[i];        if (down_interruptible (&d->sem))                return -ERESTARTSYS;        qset=d->qset;  /* retrieve the features of each device */        order=d->order;        len += sprintf(buf+len,"\nDevice %i: qset %i, order %i, sz %li\n",                       i, qset, order, (long)(d->size));        for (; d; d=d->next) { /* scan the list */            len += sprintf(buf+len,"  item at %p, qset at %p\n",d,d->data);            scullp_proc_offset (buf, start, &offset, &len);            if (len > limit)                goto out;            if (d->data && !d->next) /* dump only the last item - save space */                for (j=0; j<qset; j++) {                    if (d->data[j])                        len += sprintf(buf+len,"    % 4i:%8p\n",j,d->data[j]);                    scullp_proc_offset (buf, start, &offset, &len);                    if (len > limit)                        goto out;		}        }    out:        up (&scullp_devices[i].sem);	if (len > limit)	    break;    }    *eof = 1;    return len;}#ifdef USE_PROC_REGISTERstatic int scullp_get_info (char *buf, char **start, off_t offset,                int len, int unused){    int eof = 0;    return scullp_read_procmem(buf, start, offset, len, &eof, NULL);}struct proc_dir_entry scullp_proc_entry = {        0,                 /* low_ino: the inode -- dynamic */        9, "scullpmem",     /* len of name and name */        S_IFREG | S_IRUGO, /* mode */        1, 0, 0,           /* nlinks, owner, group */        0, NULL,           /* size - unused; operations -- use default */        scullp_get_info,   /* function used to read data */        /* nothing more */    };static inline void create_proc_read_entry (const char *name, mode_t mode,                struct proc_dir_entry *base, void *read_func, void *data){    proc_register_dynamic (&proc_root, &scullp_proc_entry);}static inline void remove_proc_entry (char *name, void *parent){    proc_unregister (&proc_root, scullp_proc_entry.low_ino);}#endif /* USE_PROC_REGISTER */#endif /* SCULLP_USE_PROC *//* * Open and close */int scullp_open (struct inode *inode, struct file *filp){    int num = MINOR(inode->i_rdev);    ScullP_Dev *dev; /* device information */    /*  check the device number */    if (num >= scullp_devs) return -ENODEV;    dev = &scullp_devices[num];    /* now trim to 0 the length of the device if open was write-only */     if ( (filp->f_flags & O_ACCMODE) == O_WRONLY) {        if (down_interruptible (&dev->sem))            return -ERESTARTSYS;        scullp_trim(dev); /* ignore errors */        up (&dev->sem);    }    /* and use filp->private_data to point to the device data */    filp->private_data = dev;    MOD_INC_USE_COUNT;    return 0;          /* success */}int scullp_release (struct inode *inode, struct file *filp){    MOD_DEC_USE_COUNT;    return 0;}/* * Follow the list  */ScullP_Dev *scullp_follow(ScullP_Dev *dev, int n){    while (n--) {        if (!dev->next) {            dev->next = kmalloc(sizeof(ScullP_Dev), GFP_KERNEL);            memset(dev->next, 0, sizeof(ScullP_Dev));        }        dev = dev->next;        continue;    }    return dev;}/* * Data management: read and write */ssize_t scullp_read (struct file *filp, char *buf, size_t count,                loff_t *f_pos){    ScullP_Dev *dev = filp->private_data; /* the first listitem */    ScullP_Dev *dptr;    int quantum = PAGE_SIZE << dev->order;    int qset = dev->qset;    int itemsize = quantum * qset; /* how many bytes in the listitem */    int item, s_pos, q_pos, rest;    ssize_t retval = 0;    if (down_interruptible (&dev->sem))            return -ERESTARTSYS;    if (*f_pos > dev->size)         goto nothing;    if (*f_pos + count > dev->size)        count = dev->size - *f_pos;    /* find listitem, qset index, and offset in the quantum */    item = ((long) *f_pos) / itemsize;    rest = ((long) *f_pos) % itemsize;    s_pos = rest / quantum; q_pos = rest % quantum;    /* follow the list up to the right position (defined elsewhere) */    dptr = scullp_follow(dev, item);    if (!dptr->data)        goto nothing; /* don't fill holes */    if (!dptr->data[s_pos])        goto nothing;    if (count > quantum - q_pos)        count = quantum - q_pos; /* read only up to the end of this quantum */    if (copy_to_user (buf, dptr->data[s_pos]+q_pos, count)) {        retval = -EFAULT;        goto nothing;    }    up (&dev->sem);    *f_pos += count;    return count;  nothing:    up (&dev->sem);    return retval;}ssize_t scullp_write (struct file *filp, const char *buf, size_t count,                loff_t *f_pos){    ScullP_Dev *dev = filp->private_data;    ScullP_Dev *dptr;    int quantum = PAGE_SIZE << dev->order;    int qset = dev->qset;    int itemsize = quantum * qset;    int item, s_pos, q_pos, rest;    ssize_t retval = -ENOMEM; /* our most likely error */    if (down_interruptible (&dev->sem))            return -ERESTARTSYS;    /* find listitem, qset index and offset in the quantum */    item = ((long) *f_pos) / itemsize;    rest = ((long) *f_pos) % itemsize;    s_pos = rest / quantum; q_pos = rest % quantum;    /* follow the list up to the right position */    dptr = scullp_follow(dev, item);    if (!dptr->data) {        dptr->data = kmalloc(qset * sizeof(void *), GFP_KERNEL);        if (!dptr->data)            goto nomem;        memset(dptr->data, 0, qset * sizeof(char *));    }    /* Here's the allocation of a single quantum */    if (!dptr->data[s_pos]) {        dptr->data[s_pos] =	  (void *)__get_free_pages(GFP_KERNEL, dptr->order);        if (!dptr->data[s_pos])            goto nomem;        memset(dptr->data[s_pos], 0, PAGE_SIZE << dptr->order);    }