# ifndef _main
# define _main
#define uchar unsigned char
void Delay2();
void Delay(uchar count);
void Delay1ms(uchar count);
void Start();
void Stop();
void SendByte(uchar Datavalue);
void WaitACK();
uchar GetByte(void);
void SendNoACK(void);
void out_disp(uchar out_data);
void displayclear();
void enable_display(uchar place);
uchar Read_AT24C04(uchar Addr);
void Write_AT24C04(uchar Addr,uchar Datavalue);
void Bit_To_BCD(uchar *Pdata,uchar *BCDresult,uchar cmd);
void Bit_To_BCD_COS(uchar * Pdata, uchar *Udata, uchar *Idata, uchar * BCDresult, uchar cmd);
void float_to_bcd(float result,uchar *BCDresult,uchar cmd);
void Send_5460(uchar Send_data);
uchar Receive_5460();
void Write_To_5460(uchar *Pdata,uchar len);
void Read_T0_5460(uchar *Pdata,uchar cmd);
void Clear_DRDY();
void Wait_DRDY_High();
void Current_Plus_adjust(RX_count1,RX_count2);
void Voltage_Plus_adjust(RX_count1,RX_count2);
void Current_DC_Offset_adjust();
void Voltage_DC_Offset_adjust();
void Send_data();
void Write_UART(uchar cc);
void Phase_Compensation();
# endif