/* crypto/bn/bn_lcl.h *//* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. *  * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to.  The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code.  The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). *  * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. *  * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software *    must display the following acknowledgement: *    "This product includes cryptographic software written by *     Eric Young (eay@cryptsoft.com)" *    The word 'cryptographic' can be left out if the rouines from the library *    being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from  *    the apps directory (application code) you must include an acknowledgement: *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" *  * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. *  * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed.  i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] *//* ==================================================================== * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer.  * * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in *    the documentation and/or other materials provided with the *    distribution. * * 3. All advertising materials mentioning features or use of this *    software must display the following acknowledgment: *    "This product includes software developed by the OpenSSL Project *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to *    endorse or promote products derived from this software without *    prior written permission. For written permission, please contact *    openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" *    nor may "OpenSSL" appear in their names without prior written *    permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following *    acknowledgment: *    "This product includes software developed by the OpenSSL Project *    for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com).  This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */#ifndef HEADER_BN_LCL_H#define HEADER_BN_LCL_H#include <openssl/bn.h>#ifdef  __cplusplusextern "C" {#endif/* * BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions * * * For window size 'w' (w >= 2) and a random 'b' bits exponent, * the number of multiplications is a constant plus on average * *    2^(w-1) + (b-w)/(w+1); * * here  2^(w-1)  is for precomputing the table (we actually need * entries only for windows that have the lowest bit set), and * (b-w)/(w+1)  is an approximation for the expected number of * w-bit windows, not counting the first one. * * Thus we should use * *    w >= 6  if        b > 671 *     w = 5  if  671 > b > 239 *     w = 4  if  239 > b >  79 *     w = 3  if   79 > b >  23 *    w <= 2  if   23 > b * * (with draws in between).  Very small exponents are often selected * with low Hamming weight, so we use  w = 1  for b <= 23. */#if 1#define BN_window_bits_for_exponent_size(b) \		((b) > 671 ? 6 : \		 (b) > 239 ? 5 : \		 (b) >  79 ? 4 : \		 (b) >  23 ? 3 : 1)#else/* Old SSLeay/OpenSSL table. * Maximum window size was 5, so this table differs for b==1024; * but it coincides for other interesting values (b==160, b==512). */#define BN_window_bits_for_exponent_size(b) \		((b) > 255 ? 5 : \		 (b) > 127 ? 4 : \		 (b) >  17 ? 3 : 1)#endif	 /* Pentium pro 16,16,16,32,64 *//* Alpha       16,16,16,16.64 */#define BN_MULL_SIZE_NORMAL			(16) /* 32 */#define BN_MUL_RECURSIVE_SIZE_NORMAL		(16) /* 32 less than */#define BN_SQR_RECURSIVE_SIZE_NORMAL		(16) /* 32 */#define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL	(32) /* 32 */#define BN_MONT_CTX_SET_SIZE_WORD		(64) /* 32 */#if !defined(NO_ASM) && !defined(NO_INLINE_ASM) && !defined(PEDANTIC)/* * BN_UMULT_HIGH section. * * No, I'm not trying to overwhelm you when stating that the * product of N-bit numbers is 2*N bits wide:-) No, I don't expect * you to be impressed when I say that if the compiler doesn't * support 2*N integer type, then you have to replace every N*N * multiplication with 4 (N/2)*(N/2) accompanied by some shifts * and additions which unavoidably results in severe performance * penalties. Of course provided that the hardware is capable of * producing 2*N result... That's when you normally start * considering assembler implementation. However! It should be * pointed out that some CPUs (most notably Alpha, PowerPC and * upcoming IA-64 family:-) provide *separate* instruction * calculating the upper half of the product placing the result * into a general purpose register. Now *if* the compiler supports * inline assembler, then it's not impossible to implement the * "bignum" routines (and have the compiler optimize 'em) * exhibiting "native" performance in C. That's what BN_UMULT_HIGH * macro is about:-) * *					<appro@fy.chalmers.se> */# if defined(__alpha) && (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT))#  if defined(__DECC)#   include <c_asm.h>#   define BN_UMULT_HIGH(a,b)	(BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b))#  elif defined(__GNUC__)#   define BN_UMULT_HIGH(a,b)	({	\	register BN_ULONG ret;		\	asm ("umulh	%1,%2,%0"	\	     : "=r"(ret)		\	     : "r"(a), "r"(b));		\	ret;			})#  endif	/* compiler */# elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG)#  if defined(__GNUC__)#   define BN_UMULT_HIGH(a,b)	({	\	register BN_ULONG ret;		\	asm ("mulhdu	%0,%1,%2"	\	     : "=r"(ret)		\	     : "r"(a), "r"(b));		\	ret;			})#  endif	/* compiler */# endif		/* cpu */#endif		/* NO_ASM *//************************************************************* * Using the long long type */#define Lw(t)    (((BN_ULONG)(t))&BN_MASK2)#define Hw(t)    (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2)/* This is used for internal error checking and is not normally used */#ifdef BN_DEBUG# include <assert.h># define bn_check_top(a) assert ((a)->top >= 0 && (a)->top <= (a)->dmax);#else# define bn_check_top(a)#endif/* This macro is to add extra stuff for development checking */#ifdef BN_DEBUG#define	bn_set_max(r) ((r)->max=(r)->top,BN_set_flags((r),BN_FLG_STATIC_DATA))#else#define	bn_set_max(r)#endif/* These macros are used to 'take' a section of a bignum for read only use */#define bn_set_low(r,a,n) \	{ \	(r)->top=((a)->top > (n))?(n):(a)->top; \	(r)->d=(a)->d; \	(r)->neg=(a)->neg; \	(r)->flags|=BN_FLG_STATIC_DATA; \	bn_set_max(r); \	}#define bn_set_high(r,a,n) \	{ \	if ((a)->top > (n)) \		{ \		(r)->top=(a)->top-n; \		(r)->d= &((a)->d[n]); \		} \	else \		(r)->top=0; \	(r)->neg=(a)->neg; \	(r)->flags|=BN_FLG_STATIC_DATA; \	bn_set_max(r); \	}#ifdef BN_LLONG#define mul_add(r,a,w,c) { \	BN_ULLONG t; \	t=(BN_ULLONG)w * (a) + (r) + (c); \	(r)= Lw(t); \	(c)= Hw(t); \	}#define mul(r,a,w,c) { \	BN_ULLONG t; \	t=(BN_ULLONG)w * (a) + (c); \	(r)= Lw(t); \	(c)= Hw(t); \	}#define sqr(r0,r1,a) { \	BN_ULLONG t; \	t=(BN_ULLONG)(a)*(a); \	(r0)=Lw(t); \	(r1)=Hw(t); \	}#elif defined(BN_UMULT_HIGH)#define mul_add(r,a,w,c) {		\	BN_ULONG high,low,ret,tmp=(a);	\	ret =  (r);			\	high=  BN_UMULT_HIGH(w,tmp);	\	ret += (c);			\	low =  (w) * tmp;		\	(c) =  (ret<(c))?1:0;		\	(c) += high;			\	ret += low;			\	(c) += (ret<low)?1:0;		\	(r) =  ret;			\	}#define mul(r,a,w,c)	{		\	BN_ULONG high,low,ret,ta=(a);	\	low =  (w) * ta;		\	high=  BN_UMULT_HIGH(w,ta);	\	ret =  low + (c);		\	(c) =  high;			\	(c) += (ret<low)?1:0;		\	(r) =  ret;			\	}#define sqr(r0,r1,a)	{		\	BN_ULONG tmp=(a);		\	(r0) = tmp * tmp;		\	(r1) = BN_UMULT_HIGH(tmp,tmp);	\	}#else/************************************************************* * No long long type */#define LBITS(a)	((a)&BN_MASK2l)#define HBITS(a)	(((a)>>BN_BITS4)&BN_MASK2l)#define	L2HBITS(a)	((BN_ULONG)((a)&BN_MASK2l)<<BN_BITS4)#define LLBITS(a)	((a)&BN_MASKl)#define LHBITS(a)	(((a)>>BN_BITS2)&BN_MASKl)#define	LL2HBITS(a)	((BN_ULLONG)((a)&BN_MASKl)<<BN_BITS2)#define mul64(l,h,bl,bh) \	{ \	BN_ULONG m,m1,lt,ht; \ \	lt=l; \	ht=h; \	m =(bh)*(lt); \	lt=(bl)*(lt); \	m1=(bl)*(ht); \	ht =(bh)*(ht); \	m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS(1L); \	ht+=HBITS(m); \	m1=L2HBITS(m); \	lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \	(l)=lt; \	(h)=ht; \	}#define sqr64(lo,ho,in) \	{ \	BN_ULONG l,h,m; \ \	h=(in); \	l=LBITS(h); \	h=HBITS(h); \	m =(l)*(h); \	l*=l; \	h*=h; \	h+=(m&BN_MASK2h1)>>(BN_BITS4-1); \	m =(m&BN_MASK2l)<<(BN_BITS4+1); \	l=(l+m)&BN_MASK2; if (l < m) h++; \	(lo)=l; \	(ho)=h; \	}#define mul_add(r,a,bl,bh,c) { \	BN_ULONG l,h; \ \	h= (a); \	l=LBITS(h); \	h=HBITS(h); \	mul64(l,h,(bl),(bh)); \ \	/* non-multiply part */ \	l=(l+(c))&BN_MASK2; if (l < (c)) h++; \	(c)=(r); \	l=(l+(c))&BN_MASK2; if (l < (c)) h++; \	(c)=h&BN_MASK2; \	(r)=l; \	}#define mul(r,a,bl,bh,c) { \	BN_ULONG l,h; \ \	h= (a); \	l=LBITS(h); \	h=HBITS(h); \	mul64(l,h,(bl),(bh)); \ \	/* non-multiply part */ \	l+=(c); if ((l&BN_MASK2) < (c)) h++; \	(c)=h&BN_MASK2; \	(r)=l&BN_MASK2; \	}#endif /* !BN_LLONG */void bn_mul_normal(BN_ULONG *r,BN_ULONG *a,int na,BN_ULONG *b,int nb);void bn_mul_comba8(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);void bn_mul_comba4(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);void bn_sqr_normal(BN_ULONG *r, BN_ULONG *a, int n, BN_ULONG *tmp);void bn_sqr_comba8(BN_ULONG *r,BN_ULONG *a);void bn_sqr_comba4(BN_ULONG *r,BN_ULONG *a);int bn_cmp_words(BN_ULONG *a,BN_ULONG *b,int n);void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,BN_ULONG *t);void bn_mul_part_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,	int tn, int n,BN_ULONG *t);void bn_sqr_recursive(BN_ULONG *r,BN_ULONG *a, int n2, BN_ULONG *t);void bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n);void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,	BN_ULONG *t);void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2,	BN_ULONG *t);#ifdef  __cplusplus}#endif#endif