?? adsp-bf533_c.ldf
字號:
/*
** LDF for ADSP-BF533.
**
** There are a number of configuration options that can be specified
** either by compiler flags, or by linker flags directly. The options are:
**
** USE_PROFILER0
** Enabled by -p. Link in profiling library, and write results to
** both stdout and mon.out.
** USE_PROFILER1
** Enabled by -p1. Only write profiling data to mon.out.
** USE_PROFILER2
** Enabled by -p2. Only write profiling data to stdout.
** USE_PROFILER
** Equivalent to USE_PROFILER0.
** __WORKAROUNDS_ENABLED
** Defined by compiler when -workaround is used to direct LDF to
** link with libraries that have been built with work-arounds
** enabled.
** USE_FILEIO
** Always defined; enables the File I/O Support, which is necessary
** for printf() to produce any output.
** USE_CACHE
** Makes use of Some L1 memory as cache. Implies the presence
** of at least some external memory.
*/
ARCHITECTURE(ADSP-BF533)
#ifndef __NO_STD_LIB
SEARCH_DIR( $ADI_DSP/Blackfin/lib )
#endif
/* Moving to primIO means that we must always include the FileIO support,
** so that printf() will work.
*/
#ifndef USE_FILEIO /* { */
#define USE_FILEIO 1
#endif /* } */
#ifdef USE_PROFILER /* { */
#define USE_PROFILER0
#endif /* } */
#ifdef USE_PROFILER0 /* { */
#ifdef __WORKAROUNDS_ENABLED /* { */
#define PROFFLAG prfflg0_532y.doj
#else
#define PROFFLAG prfflg0_532.doj
#endif /* } */
// The profiler needs File I/O to write its results.
#define USE_FILEIO 1
#ifndef USE_PROFILER /* { */
#define USE_PROFILER
#endif /* } */
#endif /* } */
#ifdef USE_PROFILER1 /* { */
#ifdef __WORKAROUNDS_ENABLED /* { */
#define PROFFLAG prfflg1_532y.doj
#else
#define PROFFLAG prfflg1_532.doj
#endif /* } */
#define USE_FILEIO 1
#ifndef USE_PROFILER /* { */
#define USE_PROFILER
#endif /* } */
#endif /* } */
#ifdef USE_PROFILER2 /* { */
#ifdef __WORKAROUNDS_ENABLED /* { */
#define PROFFLAG prfflg2_532y.doj
#else
#define PROFFLAG prfflg2_532.doj
#endif /* } */
#define USE_FILEIO 1
#ifndef USE_PROFILER /* { */
#define USE_PROFILER
#endif /* } */
#endif /* } */
#ifdef __WORKAROUNDS_ENABLED /* { */
#define OMEGA idle532y.doj
#else
#define OMEGA idle532.doj
#endif /* } */
#define MEMINIT __initsbsz532.doj,
#ifdef __WORKAROUNDS_ENABLED /* { */
#define LIBSMALL libsmall532y.dlb,
#else
#define LIBSMALL libsmall532.dlb,
#endif /* } */
#ifdef M3_RESERVED /* { */
#ifdef __WORKAROUNDS_ENABLED /* { */
#define LIBM3 libm3res532y.dlb
#define LIBDSP libdspm3res532y.dlb
#define SFTFLT libsftflt532y.dlb
#else
#define LIBM3 libm3res532.dlb
#define LIBDSP libdspm3res532.dlb
#define SFTFLT libsftflt532.dlb
#endif /* } */
#else
#ifdef __WORKAROUNDS_ENABLED /* { */
#define LIBM3 libm3free532y.dlb
#define LIBDSP libdsp532y.dlb
#define SFTFLT libsftflt532y.dlb
#else
#define LIBM3 libm3free532.dlb
#define LIBDSP libdsp532.dlb
#define SFTFLT libsftflt532.dlb
#endif /* } */
#endif /* } */
#ifdef IEEEFP /* { */
#define FPLIBS SFTFLT, LIBDSP
#else
#define FPLIBS LIBDSP, SFTFLT
#endif /* } */
#ifdef __WORKAROUNDS_ENABLED /* { */
#ifdef __ADI_LIBEH__
#define LIBS LIBSMALL MEMINIT libc532y.dlb, LIBM3, libevent532y.dlb, libx532y.dlb, libio532y.dlb, libcpp532yx.dlb, libcpprt532yx.dlb, FPLIBS, libetsi532.dlb, OMEGA
#else
#define LIBS LIBSMALL MEMINIT libc532y.dlb, LIBM3, libevent532y.dlb, libx532y.dlb, libio532y.dlb, libcpp532y.dlb, libcpprt532y.dlb, FPLIBS, libetsi532.dlb, OMEGA
#endif
#else
#ifdef __ADI_LIBEH__
#define LIBS LIBSMALL MEMINIT libc532.dlb, LIBM3, libevent532.dlb, libx532.dlb, libio532.dlb, libcpp532x.dlb, libcpprt532x.dlb, FPLIBS, libetsi532.dlb, OMEGA
#else
#define LIBS LIBSMALL MEMINIT libc532.dlb, LIBM3, libevent532.dlb, libx532.dlb, libio532.dlb, libcpp532.dlb, libcpprt532.dlb, FPLIBS, libetsi532.dlb, OMEGA
#endif
#endif /* } */
#if defined(USE_FILEIO) || defined(USE_PROFGUIDE)
#ifdef __WORKAROUNDS_ENABLED /* { */
$LIBRARIES = LIBS, librt_fileio532y.dlb;
#else
$LIBRARIES = LIBS, librt_fileio532.dlb;
#endif /* } */
#else
#ifdef __WORKAROUNDS_ENABLED /* { */
$LIBRARIES = LIBS, librt532y.dlb;
#else
$LIBRARIES = LIBS, librt532.dlb;
#endif /* } */
#endif /* } */
// Libraries from the command line are included in COMMAND_LINE_OBJECTS.
#ifdef USE_PROFILER /* { */
#ifdef USE_FILEIO /* { */
#ifdef __WORKAROUNDS_ENABLED /* { */
#define CRT crtsfpc532y.doj, libprofile532y.dlb, PROFFLAG
#else
#define CRT crtsfpc532.doj, libprofile532.dlb, PROFFLAG
#endif /* } */
#else
#ifdef __WORKAROUNDS_ENABLED /* { */
#define CRT crtscp532y.doj, libprofile532y.dlb, PROFFLAG
#else
#define CRT crtscp532.doj, libprofile532.dlb, PROFFLAG
#endif /* } */
#endif /* USE_FILEIO */ /* } */
#else
#ifdef USE_FILEIO /* { */
#ifdef __WORKAROUNDS_ENABLED /* { */
#define CRT crtsfc532y.doj
#else
#define CRT crtsfc532.doj
#endif /* } */
#else
#ifdef __WORKAROUNDS_ENABLED /* { */
#define CRT crtsc532y.doj
#else
#define CRT crtsc532.doj
#endif /* } */
#endif /* USE_FILEIO */ /* } */
#endif /* USE_PROFILER */ /* } */
#ifdef __WORKAROUNDS_ENABLED /* { */
#define ENDCRT , crtn532y.doj
#else
#define ENDCRT , crtn532.doj
#endif /* } */
$OBJECTS = CRT, $COMMAND_LINE_OBJECTS ,cplbtab533.doj ENDCRT;
MEMORY
{
#if 0
MEM_CORE_MMRS { /* Core memory-mapped registers - 2MB */
TYPE(RAM) WIDTH(8)
START(0xFFE00000) END(0xFFFFFFFF)
}
#endif
MEM_SYS_MMRS { /* System memory-mapped registers - 2MB */
TYPE(RAM) WIDTH(8)
START(0xFFC00000) END(0xFFDFFFFF)
}
MEM_L1_SCRATCH {
TYPE(RAM) WIDTH(8)
START(0xFFB00000) END(0xFFB00FFF)
}
/* Instruction SRAM, 82K, some useable as cache */
MEM_L1_CODE_CACHE { /* L1 Instruction SRAM/Cache - 16K */
TYPE(RAM) WIDTH(8)
START(0xFFA10000) END(0xFFA13FFF)
}
MEM_L1_CODE { /* L1 Instruction - 16K */
TYPE(RAM) WIDTH(8)
START(0xFFA00000) END(0xFFA0FFFF)
}
/* Data Bank B - 32K, half usable as cache. */
/* Split into sections for program layout. */
/* Data - normal data, 16K */
MEM_L1_DATA_B_CACHE { /* L1 Data B SRAM/Cache - 16K */
TYPE(RAM) WIDTH(8)
START(0xFF904000) END(0xFF907FFF)
}
/* Data2 - const data, 8K */
MEM_L1_DATA_B { /* L1 Data B SRAM - half of 16K */
TYPE(RAM) WIDTH(8)
START(0xFF902000) END(0xFF903FFF)
}
/* Stack - 8K */
MEM_L1_DATA_B_STACK { /* L1 Data B SRAM cont. - other half of 16K */
TYPE(RAM) WIDTH(8)
START(0xFF900000) END(0xFF901FFF)
}
/* Data Bank A - 32K, half usable as cache. */
/* Split into sections for program layout. */
/* Data - normal data, 16K. */
MEM_L1_DATA_A_CACHE { /* L1 Data A SRAM/Cache - 16K */
TYPE(RAM) WIDTH(8)
START(0xFF804000) END(0xFF807FFF)
}
#ifdef IDDE_ARGS
MEM_ARGV {
#define ARGV_START 0xFF803F00
TYPE(RAM) WIDTH(8)
START(0xFF803F00) END(0xFF803FFF)
}
MEM_L1_DATA_A { /* L1 Data A SRAM - most of 16K */
TYPE(RAM) WIDTH(8)
START(0xFF800000) END(0xFF803EFF)
}
#else
MEM_L1_DATA_A { /* L1 Data A SRAM - 16K */
TYPE(RAM) WIDTH(8)
START(0xFF800000) END(0xFF803FFF)
}
#endif
MEM_ASYNC3 { /* Async Bank 3 - 1MB */
TYPE(RAM) WIDTH(8)
START(0x20300000) END(0x203FFFFF)
}
MEM_ASYNC2 { /* Async Bank 2 - 1MB */
TYPE(RAM) WIDTH(8)
START(0x20200000) END(0x202FFFFF)
}
MEM_ASYNC1 { /* Async Bank 1 - 1MB */
TYPE(RAM) WIDTH(8)
START(0x20100000) END(0x201FFFFF)
}
MEM_ASYNC0 { /* Async Bank 0 - 1MB */
TYPE(RAM) WIDTH(8)
START(0x20000000) END(0x200FFFFF)
}
/* Claim some of SDRAM Bank 0 for heap */
/* since it needs a separate section */
MEM_SDRAM0 { /* SDRAM Bank 0 - 16MB-128M */
TYPE(RAM) WIDTH(8)
START(0x00004000) END(0x07FFFFFF)
}
MEM_SDRAM0_HEAP { /* Claim some for ext heap - 16K */
TYPE(RAM) WIDTH(8)
START(0x00000004) END(0x00003FFF)
}
}
PROCESSOR p0
{
OUTPUT( $COMMAND_LINE_OUTPUT_FILE )
/* Following address must match start of MEM_PROGRAM */
RESOLVE(start,0xFFA00000)
#ifdef IDDE_ARGS
RESOLVE(___argv_string, ARGV_START)
#endif
KEEP(start,_main)
SECTIONS
{
program_ram
{
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(L1_code) $LIBRARIES(L1_code))
INPUT_SECTIONS( $OBJECTS(cplb_code) $LIBRARIES(cplb_code))
INPUT_SECTIONS( $OBJECTS(cplb) $LIBRARIES(cplb))
INPUT_SECTIONS( $OBJECTS(program) $LIBRARIES(program))
} >MEM_L1_CODE
l1_code
{
#ifdef USE_CACHE /* { */
___l1_code_cache = 1;
#else
___l1_code_cache = 0;
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(L1_code) $LIBRARIES(L1_code))
INPUT_SECTIONS( $OBJECTS(cplb_code) $LIBRARIES(cplb_code))
INPUT_SECTIONS( $OBJECTS(cplb) $LIBRARIES(cplb))
INPUT_SECTIONS( $OBJECTS(program) $LIBRARIES(program))
#endif /* USE_CACHE } */
} >MEM_L1_CODE_CACHE
constdata
{
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(L1_data_a) $LIBRARIES(L1_data_a))
INPUT_SECTIONS( $OBJECTS(cplb_data) $LIBRARIES(cplb_data))
INPUT_SECTIONS($OBJECTS(data1) $LIBRARIES(data1))
INPUT_SECTIONS($OBJECTS(voldata) $LIBRARIES(voldata))
INPUT_SECTIONS($OBJECTS(constdata) $LIBRARIES(constdata))
INPUT_SECTIONS( $OBJECTS(ctor) $LIBRARIES(ctor) )
INPUT_SECTIONS( $OBJECTS(ctorl) $LIBRARIES(ctorl) )
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(.gdt) $LIBRARIES(.gdt) )
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(.gdtl) $LIBRARIES(.gdtl) )
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(.edt) $LIBRARIES(.edt) )
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(.cht) $LIBRARIES(.cht) )
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(.frt) $LIBRARIES(.frt) )
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(.frtl) $LIBRARIES(.frtl) )
INPUT_SECTION_ALIGN(1)
INPUT_SECTIONS( $OBJECTS(mydata1) $LIBRARIES(mydata1))
} >MEM_L1_DATA_A
data
{
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(L1_data_b) $LIBRARIES(L1_data_b))
INPUT_SECTIONS( $OBJECTS(cplb_data) $LIBRARIES(cplb_data))
INPUT_SECTIONS($OBJECTS(data1) $LIBRARIES(data1))
INPUT_SECTIONS($OBJECTS(voldata) $LIBRARIES(voldata))
INPUT_SECTIONS($OBJECTS(constdata) $LIBRARIES(constdata))
INPUT_SECTION_ALIGN(1)
INPUT_SECTIONS( $OBJECTS(mydata2) $LIBRARIES(mydata2))
INPUT_SECTION_ALIGN(1)
INPUT_SECTIONS( $OBJECTS(mydata3) $LIBRARIES(mydata3))
} >MEM_L1_DATA_B
l1_data_a
{
#ifdef USE_CACHE /* { */
___l1_data_cache_a = 1;
#else
___l1_data_cache_a = 0;
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(L1_data_a) $LIBRARIES(L1_data_a))
INPUT_SECTIONS( $OBJECTS(cplb_data) $LIBRARIES(cplb_data))
INPUT_SECTIONS($OBJECTS(data1) $LIBRARIES(data1))
INPUT_SECTIONS($OBJECTS(constdata) $LIBRARIES(constdata))
INPUT_SECTIONS($OBJECTS(voldata) $LIBRARIES(voldata))
#endif /* USE_CACHE } */
} >MEM_L1_DATA_A_CACHE
l1_data_b
{
#ifdef USE_CACHE /* { */
___l1_data_cache_b = 1;
#else
___l1_data_cache_b = 0;
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(L1_data_b) $LIBRARIES(L1_data_b))
INPUT_SECTIONS( $OBJECTS(cplb_data) $LIBRARIES(cplb_data))
INPUT_SECTIONS($OBJECTS(constdata) $LIBRARIES(constdata))
INPUT_SECTIONS($OBJECTS(voldata) $LIBRARIES(voldata))
INPUT_SECTIONS($OBJECTS(data1) $LIBRARIES(data1))
#endif /* USE_CACHE } */
} >MEM_L1_DATA_B_CACHE
#ifdef USE_CACHE /* { */
bsz ZERO_INIT
{
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(bsz) $LIBRARIES(bsz))
} >MEM_SDRAM0
#else
bsz ZERO_INIT
{
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(bsz) $LIBRARIES(bsz))
} >MEM_L1_DATA_A
#endif /* USE_CACHE } */
bsz_init
{
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(bsz_init) $LIBRARIES(bsz_init))
} >MEM_L1_DATA_B
.meminit {} >MEM_L1_DATA_B
stack
{
ldf_stack_space = .;
ldf_stack_end = ldf_stack_space + MEMORY_SIZEOF(MEM_L1_DATA_B_STACK);
} >MEM_L1_DATA_B_STACK
#ifdef USE_CACHE /* { */
heap
{
// Allocate a heap for the application
ldf_heap_space = .;
ldf_heap_end = ldf_heap_space + MEMORY_SIZEOF(MEM_SDRAM0_HEAP) - 1;
ldf_heap_length = ldf_heap_end - ldf_heap_space;
} >MEM_SDRAM0_HEAP
#else
heap
{
// Allocate a heap for the application
ldf_heap_space = .;
ldf_heap_end = ldf_heap_space + MEMORY_SIZEOF(MEM_L1_DATA_A_CACHE) - 1;
ldf_heap_length = ldf_heap_end - ldf_heap_space;
} >MEM_L1_DATA_A_CACHE
#endif /* USE_CACHE } */
sdram
{
#ifdef USE_CACHE /* { */
INPUT_SECTION_ALIGN(4)
INPUT_SECTIONS( $OBJECTS(sdram0) $LIBRARIES(sdram0))
INPUT_SECTIONS( $OBJECTS(program) $LIBRARIES(program))
INPUT_SECTIONS( $OBJECTS(cplb) $LIBRARIES(cplb))
INPUT_SECTIONS( $OBJECTS(cplb_code) $LIBRARIES(cplb_code))
INPUT_SECTIONS($OBJECTS(data1) $LIBRARIES(data1))
INPUT_SECTIONS($OBJECTS(voldata) $LIBRARIES(voldata))
INPUT_SECTIONS($OBJECTS(constdata) $LIBRARIES(constdata))
INPUT_SECTIONS( $OBJECTS(cplb_data) $LIBRARIES(cplb_data))
#endif /* USE_CACHE } */
} >MEM_SDRAM0
}
}
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -