/****************************************************************
*	fungeninit.c				See funlib.h for instuctions	*
*	Don Luebbe					about using this file.			*
*	10/12/02													*
*																*
*	This file completes general DSP initialization.  It should 	*
*	called once and immediately after entering the main 		*
*	function.													*
****************************************************************/

#include        "f2407_c.h" 
void initGen(void)
{
/*** Configure the System Control and Status registers ***/
    *SCSR1 = 0x00FD;  
/*
 bit 15        0:      reserved
 bit 14        0:      CLKOUT = CPUCLK
 bit 13-12     00:     IDLE1 selected for low-power mode
 bit 11-9      000:    PLL x4 mode
 bit 8         0:      reserved
 bit 7         1:      1 = enable ADC module clock
 bit 6         1:      1 = enable SCI module clock
 bit 5         1:      1 = enable SPI module clock
 bit 4         1:      1 = enable CAN module clock
 bit 3         1:      1 = enable EVB module clock
 bit 2         1:      1 = enable EVA module clock
 bit 1         0:      reserved
 bit 0         1:      clear the ILLADR bit
*/

    *SCSR2 = (*SCSR2 | 0x000B) & 0x000F;
/*
 bit 15-6      0's:    reserved
 bit 5         0:      do NOT clear the WD OVERRIDE bit
 bit 4         0:      XMIF_HI-Z, 0=normal mode, 1=Hi-Z'd
 bit 3         1:      disable the boot ROM, enable the FLASH
 bit 2     no change   MP/MC* bit reflects state of MP/MC* pin
 bit 1-0      11:      11 = SARAM mapped to prog and data
*/


/*** Disable the watchdog timer ***/
    *WDCR  = 0x00E8;
/*
 bits 15-8     0's:     reserved
 bit 7         1:       clear WD flag
 bit 6         1:       disable the dog
 bit 5-3       101:     must be written as 101
 bit 2-0       000:     WDCLK divider = 1
*/


/*** Setup external memory interface for LF2407 EVM ***/
    WSGR = 0x0040;
/*
 bit 15-11     0's:    reserved
 bit 10-9      00:     bus visibility off
 bit 8-6       001:    1 wait-state for I/O space
 bit 5-3       000:    0 wait-state for data space
 bit 2-0       000:    0 wait state for program space
*/                                                   


/*** Disable PWM outputs ***/
	*ACTRA = 0x0000;
/*
bit 
*/
}