?? def.h
字號:
U16 Length; //2B
U16 check; //2B
U16 Longitude16H; //2B ms 經 //25B
U16 Longitude16L; //2B ms //25B
U16 Latitude16H; //2B ms 緯
U16 Latitude16L; //2B ms
U16 speed; //2B *10=integer
U16 Direction; //2B *10=integer
U8 DateTime[4]; //4B
U16 WarnFlag; //2B
U8 InfoFlag[2]; //2B
U8 Amount; //1B default
U16 HDOP; //2B default *10=integer
U16 HPE; //2B default *10=integer
} sGPS;
extern sGPS *pGPSvar,*pGPSvarS,*pGPSvarH;
typedef struct //Confirm Message STRU
{
U16 OperCode; //2B //value=#102 //14B
U16 TerminalID0; //2B
U16 TerminalID1; //2B
U16 TerminalID2; //2B
U16 ID; //2B
U16 Length; //2B //value=3Byte
U16 check; //2B
U16 MessageNo; //2B // 3B
U8 ConfirmType; //2B
} sConfirm;
extern sConfirm *pConfirmvar;
typedef struct //Confirm Message STRU
{
U16 OperCode; //2B //value=#104 //14B
U16 TerminalID0; //2B
U16 TerminalID1; //2B
U16 TerminalID2; //2B
U16 ID; //2B
U16 Length; //2B //value=3Byte
U16 check; //2B
} sReqTime;
extern sReqTime *pReqTimevar;
typedef struct //Confirm Message STRU
{
U16 OperCode; //2B //value=#9 //14B
U16 TerminalID0; //2B
U16 TerminalID1; //2B
U16 TerminalID2; //2B
U16 ID; //2B
U16 Length; //2B //value=3Byte
U16 check; //2B
U16 SystemYear; //2B
U8 Systemtime[5]; //5B
} sServerTime;
extern sServerTime *pServerTimevar;
extern U8 Mainwhile; //not in main while
extern U8 Write_Chinese; //Write_Chinese
extern U8 Warn_Noise_Long; //control voice long or short
extern U8 Display_Which_Screen; //in main screen,time\speed\place three screen
extern U8 historydatahavesent; //The run have sent history data and not change flag of flash
extern U8 Connect_One_HT_Server; //In the run, cannot to connect to FLASH IP SERVER,send one FLASH IP to HT server
extern U8 find_gps_time_change; //first find gps and change datetime
extern U16 count_sending_service; //count of t0 interrupt after sending_service
extern U8 bool_sending_service; //flag of start to sending_service
extern U16 count_disconnect_gprs; //count for no char received from gprs
extern U8 bool_count_disconnect_gprs; //start to count for no char received from gprs
extern U8 Temp_Open_Close,Temp_Open_Close_Count; //Control Warn flag flint
extern U8 HaveServerMessageDisplay; //have new message from server for direct into display
extern U8 connect_gprs_display; //redisplay main windows after connected to gprs
extern U8 receive_ack_of_service; //receive_ack_of_service
extern U8 Warn_Choose_Menu_Point; //Warn_Choose_Menu_Point
extern U8 Service_Info_Menu_Point; //Service_Information_Menu_Point
extern U8 ServiceScreenSize; //service current screen size
extern U8 unpush_ok,unpush_cancel,unpush_up,unpush_down,unpush_menu,unpush_page; //unpush
extern U8 unpush_lout; //unpush
extern U8 unpush_lin; //unpush
extern U8 unpush_uout; //unpush
extern U8 unpush_uin; //unpush
extern U8 quickin; //quickly direct in
extern U8 HaveReadByte; //HaveReadByte
extern U8 ReadMessagePoint; //reading message point
extern U8 MessagePoint; //received message point
extern U8 MessageCount; //received message count (total)
extern U8 MessageInBlock; //Current In Block
extern U8 Curren_Reading_Message_No; //current reading message No.
extern U8 SIM_CIMI[15]; //current SIM_CIMI value
extern U8 ServerIP[15]; //ServerIP
extern U8 ServerPort[5]; //ServerPort
extern U16 HavePressKey; //set speak count
extern U8 KeyValue; //current Key value
extern U16 No_Key_Count; //current No_Key_Count value for overtime
extern U16 MenuStatus; //Menu statuts
extern U16 current_GPRS_point;
extern U16 dealGPRS;
extern U16 backdealGPRS;
extern U16 SubGPRS; //current_GPRS_point-dealGPRS
extern U16 current_serial_point0;
extern U16 current_serial_point1;
extern U8 which_block; //block 0,1 data come from computer
extern U8 count_timer0_overflow; //count for T0
extern U8 Interval_Send_GPS; //Interval_Send_GPS
extern U8 Top_Count_T0_Overflow; //Top of count for T0
extern U16 Warn_Flag; //Warn Flag set by keypress for sending to server
extern U8 Info_Flag[2]; //Information Flag set by keypress for sending to server
extern U8 count_time; //time over for sending to server
extern U8 gps_status; //gps data have valid
extern U8 find_gprs; //find gprs AT command is ok
extern U8 connect_gprs; //TCP/IP is OK
extern U8 reconnect_gprs;
extern U8 have_message; //have_message
extern U8 switch_display_16s,bool_start_count,bool_arrive_8s,bool_arrive_16s;
extern U8 display_time_arrive;
extern U8 check_key_time_arrive;
#define outport8(port, data) *((volatile U8 *)(port)) = (U8)(data)
#define outport16(port, data) *((volatile U16 *)(port)) = (U16)(data)
#define outport32(port, data) *((volatile U32 *)(port)) = (U32)(data)
#define inport8(port) *((volatile U8 *)(port))
#define inport16(port) *((volatile U16 *)(port))
#define inport32(port) *((volatile U32 *)(port))
#define ENTER_KEY 0x0d
#define BACK_KEY 0x08
#define ESC_KEY 0x1b
//After ES3, this define does not need
#define SET_INTMSK_IRQ(n) while(1)\
{\
rI_ISPC=(n);\
rINTMSK|=(n);\
if(rI_ISPR==(n))\
rINTMSK&=~(n);\
else\
break;\
}
#endif
//***************FLASH*********************************
int SST39LF160_ProgFlash(U32 realAddr,U16 data);
void SST39LF160_EraseSector(U32 Sector);
void SST39LF160_EraseBlock(U32 Block);
void SST39LF160_EraseChip(void);
int SST39LF160_CheckId(void);
int SST39LF160BlankCheck(U32 Addr, U32 Size);
void ProgramSST39LF160(void);
//***************main*********************************
void Led_Display(int data);
void Beep(unsigned int time);
void Beep_Off(void);
void Beep_On(void);
void Close_Machine(void);
void send_cpu_serial_string(U8 *str,U16 strlen);
void send_GPRS_string(U8 *str,U16 strlen);
void set_serial_command(U8 *str, U8 t0, U8 t1, U8 t2, U8 t3, U8 t4, U8 t5);
U8 calculate_checksum(U8 *str, U16 strlen);
void write_chinese_to_flash(U8 *str,U8 which4K);
void move_string(U8 *str_long, U16 sourcepoint,U8 *str,U16 destpoint,U16 bufferlen);
U16 find_string_move(U8 *str_long, U16 startpoint,U8 *str,U16 bufferlen);
U16 find_string(U8 *str_long, U16 startpoint,U16 endpoint,U8 *str,U8 substrlen);
U16 get_nth_data(U8 *str_long, U16 startpoint,U8 nth,U8 specichar);
void get_8s_GPS_data(void);
void Init_GPS_Frame_Header(void);
void Init_Service_GPS_Frame_Header(void);
void Save_Service_GPS_Frame(void);
void Fill_In_Service_GPS_Frame(void);
void Init_Comm_Reg_Frame_Header(void);
void Send_Flash_IP_Port_To_Server_Header(void);
void Init_Require_Time_Frame_Header(void);
void Open_GR47_and_Find_Empty_Flash_Point(void);
void Get_GPS_History_Package(void);
void Close_TCPIP(void);
void Get_Dynamic_IPaddr(void);
void Get_SIM_CIMI(void);
void Get_IP_From_FLASH_To_DBUFA(void);
void Display_SMS_Sub(void);
void Get_Curren_Display_SMS_Point(void);
void Check_If_Have_No_Read_SMS(void);
void Display_SMS(void);
void Continue_Display_SMS(void);
void Send_Answer_OK_Message(U8 answervalue);
void Send_Answer_Menu_Display(void);
void SystemInformation(void);
void AboutTheSystem(void);
void AutoRestoreIP(void);
void Connect_To_HT_Server(void);
void Connect_To_Flash_IP_Server(void);
void display_send_service_status(U8 WScreen,U8 current_status);
void Send_Service_Choose_Header(void);
void Send_Service_Choose(U8 WScreen,U8 ScreenSize);
void Send_Warn_Choose_Header(void);
void Send_Warn_Choose(void);
void Send_Warn_Choose_Blink(void);
void handle_serial_com0(void);
void handle_serial_com1(void);
void keypress_main(void);
void display_time_program(void);
void Sysloader_LoadFont1616(void);
void read_flash_to_ram(U32 sourcestartaddr,U8 *buffer, U16 deststartaddr, U16 movelen);
void write_ram_to_flash(U8 *buffer, U16 sourcestartaddr, U32 deststartaddr, U16 movelen);
void __irq Eint0RTL(void); //INT0:RTL
void __irq Eint1GPS(void); //INT1:GPS
void TimerInt(void);
void __irq Timer_0INT(void);
void __irq Timer_1INT(void); //open kjc
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -