?? cbctrls.cpp
字號:
/////////////////
// CBCtrlS.cpp : << chibi >> global contral data structure
// v0014 : Feb.16.1997,devided from CBCTRL.cpp
// v0020 : Mar.29.1997,add most controls
// written by : Liu Gang
// Compiler : Visual C++ 4.2
// Copyright : WayAhead Co.Ltd. 1996-1997
/////////////////
// 此文件包含游戲對控制結構（命令，狀態，步，幀）的處理
#include "stdafx.h"
#include "Assert.h"
#include "CBCTRL.h"
#include "CBShadow.h"
#include "CBMini.h"
#include "CBDATA.h"
#include "CBEyes.h"
//////////////////////
// Dong hai, 行軍算法
#include "March_n.h"
extern BYTE MARCH_TrackForward[NUMBER_OF_TRACK];//此數組為用來存儲最后由行軍軌跡求出的行軍路線的方向變化
extern short MARCH_Track[NUMBER_OF_TRACK][3];//此數組為用來存儲最后的行軍軌跡的數組
//////////////////////
// LHJ
#include "marco.h" // BUTTON_UP BUTTON_DISABLE
#include "interfac.h" // FACE_SetNumberButtonState(int number, int state);
#include "cbprompt.h" // FACE_UpdateExperience(), FACE_UpdateSoldierNumber()
// LHJ
//////////////////////
//////////////////////
// externals
extern int MAP_nLocationNum[4]; // defined in CBMap.cpp
extern POINT MAP_ptLocation[2][MAP_LOCATION_MAX]; // defined in CBMap.cpp
extern int MAP_nDrawNum[4]; // defined in CBMap.cpp
//////////////////////
//////////////////////
// local functions
// 在剛剛創建單元后，使用此函數對該單元賦給屬性值
void CTRL_SetUnitAttribute( struct UNIT_STRUCT *pUnit );
//////////////////////
//////////////////////
// 狀態處理
// Status
//////////////////////
// check each unit if should change Status
void CTRL_STATUS_Main()
{
for( int i=0; i<GAME_PLAYER_MAX; i++ )
{
#ifdef _DEBUG
int nCounter=0;
#endif
for( int j=0; j<PLAYER_UNIT_MAX; j++ )
{
if( GAME.Players[i].Unit[j].nType != MAP_UNIT_TYPE_NONE )
{
CTRL_STATUS_Change( &GAME.Players[i].Unit[j] );
#ifdef _DEBUG
nCounter++;
#endif
}
}
#ifdef _DEBUG
if( GAME.Players[i].wUnitCounter!= nCounter )
OutputDebugString( "CTRL_STATUS_Main Error(0): Unit number check error!\n" );
#endif
}
}
// change the Status of the unit
// pUnit : the unit to be changed to
inline void CTRL_STATUS_Change( struct UNIT_STRUCT *pUnit )
{
Assert( pUnit->nType != MAP_UNIT_TYPE_NONE );
// 死亡時不響應任何命令
if( EYE_IfUnitIsDead( pUnit ) ) return; // has dead
#ifdef _DEBUG
// 是否要從建筑里出來
if( pUnit->nHasShadow == 0 )
{
Assert( pUnit->Status.bIRQ == TRUE );
pUnit->Status.bIRQ = TRUE;
}
#endif
if( pUnit->Task.nTaskID == QUXIAO ) return; // no command at all
////////////////////////////
// 清除Bug!!!
// 必須當單元完成一個“步”操作后，才能接收新的命令
if( pUnit->Draw.ptOff.x != 0 || pUnit->Draw.ptOff.y != 0 )
return;
////////////////////////////
// new command
// 新命令，TASK的nTaskID不為QUXIAO，bDone為TRUE
if( pUnit->Task.bDone )
{
Assert( pUnit->Draw.ptOff.x == 0 || pUnit->Draw.ptOff.y == 0 );
#ifdef _DEBUG_OFFSET_
if( pUnit->Draw.ptOff.x != 0 || pUnit->Draw.ptOff.y != 0 )
{
// WriteLogFile( "off.log", "change0\n" );
}
#endif //_DEBUG_OFFSET_
// 對某些舊命令要有一些結束的操作
if( pUnit->Status.nTaskID == GONGJI )
{
Assert( pUnit->Status.nTaskIDEx == 2 );
Assert( pUnit->Status.nParam1 != MAP_DATA_NONE );
struct UNIT_STRUCT *pU = MAP_GetUnit( pUnit->Status.nParam1 );
Assert( pU );
pU->nIDAttackMe = MAP_DATA_NONE;
}
pUnit->nIDAttackMe = MAP_DATA_NONE;
if( pUnit->Status.nTaskID == YUNSONG
&& pUnit->Status.nTaskIDEx == 1
&& EYE_IfUnitIsWorker( pUnit )
&& pUnit->Status.bDone == FALSE )
{
int nDir;
nDir = pUnit->Draw.nDir;
int bOdd = pUnit->Draw.nY&1;
int nX = pUnit->Draw.nX + MAP_ptSenser[bOdd][0][nDir].x;
int nY = pUnit->Draw.nY + MAP_ptSenser[bOdd][0][nDir].y;
WORD codeG = MAP_GetGroundData( pUnit->Draw.nLayer, nX, nY );
if( codeG != MAP_DATA_NONE )
{
struct MAP_GROUND_CODE_STRUCT stctG;
MAP_GroundDeCode( codeG, &stctG );
Assert( stctG.nAttr != MAP_SPECIAL_NONE );
Assert( stctG.nAttr == pUnit->Soldier.nResType+4 ); // 碰巧
stctG.nAttr -= 4; // 設置為采集完
codeG = MAP_GroundEnCode( stctG );
MAP_SetGroundData( pUnit->Draw.nLayer, nX, nY, codeG );
}
}
if( pUnit->Status.nTaskID == MFU )
{
CTRL_SetSTG( &pUnit->Draw, MAIFU, FALSE );
}
// 對于已經打開的門，則不再執行此命令
// Aug.8, 1997, Liu Gang
if( pUnit->Status.nTaskID == KAIMEN
&& pUnit->nCounter != 0 )
{
pUnit->Task.bDone = FALSE;
// 計數器不能為0
//pUnit->nCounter = 0;
return;
}
// OutputDebugString( "CTRL_TASK : New Command: " );
// OutputString( pUnit->Task.nID, "," );
// OutputString( pUnit->Task.nTaskID, "," );
// OutputString( pUnit->Task.nTaskIDEx, "\n" );
// set TASK to "doing"
// 設置完畢狀態后，bDone為FALSE
pUnit->Task.bDone = FALSE;
pUnit->nCounter = 0;
// 運送任務，但是此時該單元已經攜帶有資源了
if( pUnit->Task.nTaskID == YUNSONG
&& EYE_IfUnitIsWorker( pUnit )
&& pUnit->Soldier.nResource > 0 )
{
// 設置該士兵為回送的任務
struct CTRL_TASK_STRUCT Task;
CTRL_TASK_Clear( &Task );
Task.nID = pUnit->nID;
// 目的地是所帶資源的家
Task.nParam1 = TY_FindNearHome(pUnit->Draw.nPlayer,pUnit->Draw.nX, pUnit->Draw.nY, pUnit->Soldier.nResType);
if( Task.nParam1 == MAP_DATA_NONE )
{ // 如果沒有老家，則結束命令
Task.nTaskID = JIESHU;
}
else
{
Task.nTaskID = HUISONG;
Task.nTaskIDEx = 2; // MOUSE_HITRESULT_UNIT
Task.nTaskIDEx2 = pUnit->Task.nTaskIDEx2; // 保存資源類型
if( pUnit->Task.nTaskIDEx == 1 ) // MOUSE_HITRESULT_GROUND
{
Task.nParam2 = pUnit->Task.nParam1; // 原來資源的位置Z
Task.nParam3 = pUnit->Task.nParam2; // 原來資源的位置X
Task.nParam4 = pUnit->Task.nParam3; // 原來資源的位置Y
}
else
{
Task.nParam4 = pUnit->Task.nParam1; // 保存原來的資源建筑ID
}
Assert( Task.nParam1 != MAP_DATA_NONE );
}
Task.bDone = TRUE;
CTRL_TASK_DeployByComputer( pUnit->Draw.nPlayer, &Task );
return;
}
if( (pUnit->Task.nTaskID == XIULI
|| (pUnit->Task.nTaskID == YIDONG && pUnit->Task.nTaskIDEx == 2) )
&& EYE_IfUnitIsWorker( pUnit )
&& pUnit->Soldier.nResType != QXZIYUAN
&& pUnit->Soldier.nResource > 0 )
{ // 把工人任務變為回送
struct UNIT_STRUCT *pU = MAP_GetUnit( pUnit->Task.nParam1 );
Assert( pU );
if( !EYE_IfUnitIsDead( pU )
&& EYE_IfUnitIsBuild( pU ) && (pU->Draw.nPlayer == pUnit->Draw.nPlayer) )
{
int nRes = EYE_GetUResHome( pU );
if( nRes == pUnit->Soldier.nResType || nRes == SUOYOUZY
|| (nRes == MAITIAN && pUnit->Soldier.nResType == LIANGCANG) )
{
struct CTRL_TASK_STRUCT Task;
CTRL_TASK_Clear( &Task );
Task.nID = pUnit->nID;
Task.nTaskID = HUISONG;
Task.nTaskIDEx = 2;
Task.nTaskIDEx2 = pUnit->Soldier.nResType; // 保存資源類型
if( pUnit->Soldier.nResType == 0
|| pUnit->Soldier.nResType == 1 )
{ // 地形類型資源
Task.nParam2 = pUnit->Draw.nLayer;
Task.nParam3 = pUnit->Draw.nX;
Task.nParam4 = pUnit->Draw.nY;
}
else
{ // 建筑類型資源
Task.nParam4 = MAP_DATA_NONE;
}
Task.nParam1 = pUnit->Task.nParam1; // 目的單元ID
Assert( Task.nParam1 != MAP_DATA_NONE );
Task.bDone = TRUE;
// 發送
CTRL_TASK_DeployByComputer( pUnit->Draw.nPlayer, &Task );
return;
}
}
}
// set status to unit
CTRL_TASK_Copy( &pUnit->Status, &pUnit->Task );
// change status if needed
// 對于多狀態任務，設置其第一狀態為移動
// if( pUnit->Status.nTaskID == JIANZAO ) // 建造
// pUnit->Status.nTaskIDEx = 1; //MOUSE_HITRESULT_GROUND,設置目的地類型
if( pUnit->Status.nTaskID == XIULI ) // 修理
Assert( pUnit->Status.nTaskIDEx == 2 );
// pUnit->Status.nTaskIDEx = 2; //MOUSE_HITRESULT_GROUND,設置目的地類型
// 卸載，當nTaskIDEx2為0時，要先移動后卸載
if( pUnit->Status.nTaskID == XIEZAI
&& pUnit->Status.nTaskIDEx2 == 0 )
{
pUnit->Status.nTaskID = YIDONG;
}
if( pUnit->Status.nTaskID == YUNZAI
&& !(EYE_IfUnitIsTransport( pUnit )
&& pUnit->Status.nTaskIDEx2 == 1) )
{
pUnit->Status.nTaskID = YIDONG;
}
if( !EYE_IfUnitIsBuild( pUnit ) )
{
switch( pUnit->Status.nTaskID )
{
case JIANZAO: // 建造
case GONGJI: // 攻擊
case YUNSONG: // 運送
case XIULI: // 修理
//case ZHENXING: // 陣型
//case DANTIAO: // 單挑
case HUISONG: // 回送
pUnit->Status.nTaskID = YIDONG;
break;
}
}
// 設置動畫幀狀態
if( pUnit->Status.nTaskID == YIDONG
&& EYE_IfUnitIsWorker( pUnit )
&& pUnit->Soldier.nResource > 0 )
{
if( pUnit->Soldier.nResType == SHULIN ) // 樹林
{
pUnit->Draw.nState = pUnit->Draw.nDir+
MAP_Lib.AniSeq[pUnit->Draw.nFile].nEventBegin[3];
}
else if( pUnit->Soldier.nResType == MAITIAN // 麥田
|| pUnit->Soldier.nResType == LIANGCANG ) // 糧倉
{
pUnit->Draw.nState = pUnit->Draw.nDir+
MAP_Lib.AniSeq[pUnit->Draw.nFile].nEventBegin[5];
}
else if( pUnit->Soldier.nResType == TIEKUANG ) // 鐵礦
{
pUnit->Draw.nState = pUnit->Draw.nDir+
MAP_Lib.AniSeq[pUnit->Draw.nFile].nEventBegin[4];
}
else // 一般狀態
{
pUnit->Draw.nState = pUnit->Draw.nDir;
}
}
else pUnit->Draw.nState = pUnit->Draw.nDir;
if( !EYE_IfUnitIsBuild( pUnit ) )
{
pUnit->Draw.nFrame = 1;
pUnit->Draw.nCol = MAP_Lib.AniSeq[pUnit->Draw.nFile].nAniSeq[pUnit->Draw.nState][pUnit->Draw.nFrame]+
MAP_Lib.AniSeq[pUnit->Draw.nFile].nOffset;
pUnit->Draw.nRow = 0;
}
// 對于移動狀態，行軍算法
if( pUnit->Status.nTaskID == YIDONG )
{
int nEndx, nEndy, nEndZ;
WORD codeG;
Assert( pUnit->Status.nParam2 <= MAP_Lib.szNum.cx ); // 層號
Assert( pUnit->Status.nParam3 <= MAP_Lib.szNum.cy ); // 層號
// 如果目的地和出發點一樣，則狀態結束，不結構化
if( pUnit->Draw.nX == pUnit->Status.nParam2 && pUnit->Draw.nY == pUnit->Status.nParam3 )
{
pUnit->Status.bDone = TRUE;
return;
}
BOOL bShouldDuSe = TRUE; // 當目的地到達不了時是否設置堵塞標志
if( pUnit->Status.nTaskIDEx == 1 ) // hit ground
{
POINT ptNew = MAP_FindRegion( pUnit->Status.nParam1, pUnit->Status.nParam2,pUnit->Status.nParam3, MAP_Lib.Unit[pUnit->Draw.nFile].nItems[0], pUnit->nID );
//Assert( ptNew.x!=-1 && ptNew.y!=-1 );
if( ptNew.x == -1 || ptNew.y == -1 )
{
ptNew.x = pUnit->Status.nParam2,
ptNew.y = pUnit->Status.nParam3;
bShouldDuSe = FALSE;// 如果沒在附近找到可以到達的目的地，則不設置預堵塞
}
nEndZ = pUnit->Status.nParam1;
nEndx = ptNew.x,
nEndy = ptNew.y;
// 修改層號
for(;;)
{
codeG = MAP_GetGroundData( nEndZ, nEndx, nEndy );
if( codeG != MAP_DATA_NONE )
break;
if( nEndZ == 0 && codeG == MAP_DATA_NONE )
{
Assert(0);
break;
}
nEndZ--;
}
}
else if( pUnit->Status.nTaskIDEx == 2 ) //hit unit
{
Assert( pUnit->Status.nParam1 != MAP_DATA_NONE );
struct UNIT_STRUCT *pUnitE = MAP_GetUnit( pUnit->Status.nParam1 );
POINT ptNew = MAP_FindRegion( pUnitE->Draw.nLayer, pUnitE->Draw.nX, pUnitE->Draw.nY, MAP_Lib.Unit[pUnit->Draw.nFile].nItems[0], pUnit->nID );
//Assert( ptNew.x!=-1 && ptNew.y!=-1 );
if( ptNew.x == -1 )
{
ptNew.x = pUnit->Status.nParam2,
ptNew.y = pUnit->Status.nParam3;
bShouldDuSe = FALSE;// 如果沒在附近找到可以到達的目的地，則不設置預堵塞
}
nEndZ = pUnitE->Draw.nLayer;
nEndx = ptNew.x,
nEndy = ptNew.y;
// 修改層號
for(;;)
{
codeG = MAP_GetGroundData( nEndZ, nEndx, nEndy );
if( codeG != MAP_DATA_NONE )
break;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -