/***********************************************************************************************************                                                uC/GUI*                        Universal graphic software for embedded applications**                       (c) Copyright 2002, Micrium Inc., Weston, FL*                       (c) Copyright 2002, SEGGER Microcontroller Systeme GmbH**              礐/GUI is protected by international copyright laws. Knowledge of the*              source code may not be used to write a similar product. This file may*              only be used in accordance with a license and should not be redistributed*              in any way. We appreciate your understanding and fairness.*----------------------------------------------------------------------File        : LCD_ConfDefaults.hPurpose     : Valid LCD configuration and defaults----------------------------------------------------------------------*/#ifndef LCD_CONFIG_DEFAULTS_H#define LCD_CONFIG_DEFAULTS_H#include "LCDConf.H"            /* Configuration header file *//*********************************************************************               Defaults for config switches**********************************************************************/#if !defined (LCD_NUM_DISPLAYS)  #define LCD_NUM_DISPLAYS 1#endif#ifndef LCD_NUM_CONTROLLERS  #define LCD_NUM_CONTROLLERS (1)#endif#ifndef LCD_NUM_COLORS  #define LCD_NUM_COLORS (1L<<LCD_BITSPERPIXEL)#endif/***********************************************************************      Map the defines for controller 0 to general defines************************************************************************/#ifndef LCD_MIRROR_X  #define LCD_MIRROR_X   (0)    /* If active:  X -> -X */#endif#ifndef LCD_MIRROR_Y  #define LCD_MIRROR_Y   (0)    /* If active:  Y -> -Y */#endif#ifndef LCD_SWAP_XY  #define LCD_SWAP_XY    (0)    /* If active:  X <-> Y */#endif#ifndef LCD_XORG  #define LCD_XORG        0     /* X-origin in log.coor., usually 0 */#endif#ifndef LCD_YORG  #define LCD_YORG        0     /* Y-origin in log.coor., usually 0 */#endif/* Allow use of multiple physical lines for one logical line ...   Used for delta-type LCDs, where value should be 2 */#ifndef LCD_YMAG  #define LCD_YMAG 1#endif#ifndef LCD_XMAG  #define LCD_XMAG 1#endif#ifndef LCD_VXSIZE  #define LCD_VXSIZE      (LCD_XSIZE*LCD_XMAG) /* virtual x-size */#endif#ifndef LCD_VYSIZE  #define LCD_VYSIZE      (LCD_YSIZE*LCD_YMAG) /* virtual y-size */#endif#ifndef LCD_SWAP_BYTE_ORDER  #define LCD_SWAP_BYTE_ORDER (0)    /* only for 16 bit bus, default is not swapped */#endif#ifndef  LCD_MAX_LOG_COLORS  #define  LCD_MAX_LOG_COLORS (256)#endif#ifndef LCD_REVERSE  #define LCD_REVERSE 0#endif/* Optionally swap red and blue components */#ifndef LCD_SWAP_RB  #define LCD_SWAP_RB 0#endif#if !defined (LCD_CONTROLLER) && defined (LCD_CONTROLLER_0)  #define LCD_CONTROLLER LCD_CONTROLLER_0#endif#if !defined (LCD_XSIZE) && defined (LCD_XSIZE_0)  #define LCD_XSIZE          LCD_XSIZE_0#endif#if !defined (LCD_YSIZE) && defined (LCD_YSIZE_0)  #define LCD_YSIZE          LCD_YSIZE_0#endif#if !defined (LCD_BITSPERPIXEL) && defined (LCD_BITSPERPIXEL_0)  #define LCD_BITSPERPIXEL   LCD_BITSPERPIXEL_0#endif#if !defined (LCD_VYSIZE) && defined (LCD_VYSIZE_0)  #define LCD_VYSIZE          LCD_VYSIZE_0#endif/***********************************************************************      Defaults for Display 0 (first display)************************************************************************/#ifndef LCD_MIRROR_X  #define LCD_MIRROR_X   (0)    /* If active:  X -> -X */#endif#ifndef LCD_MIRROR_Y  #define LCD_MIRROR_Y   (0)    /* If active:  Y -> -Y */#endif#ifndef LCD_SWAP_XY  #define LCD_SWAP_XY    (0)    /* If active:  X <-> Y */#endif/* Position data for controller 0 */#ifndef LCD_XORG0  #define LCD_XORG0     (0)     /* leftmost position covered by this controller */#endif#ifndef LCD_YORG0  #define LCD_YORG0     (0)     /* topmost position covered by this controller */#endif#ifndef LCD_XSIZE0  #define LCD_XSIZE0    (LCD_XSIZE)   /* horizontal size covered by this controller */#endif#ifndef LCD_YSIZE0 #define LCD_YSIZE0    (LCD_YSIZE)   /* vertical size covered by this controller */#endif#ifndef LCD_FIRSTSEG0  #define LCD_FIRSTSEG0 (0)     /* first segment used by this controller */#endif#ifndef LCD_LASTSEG0  #define LCD_LASTSEG0    (LCD_XSIZE-1) /* Contr.0: last segment line used */#endif#ifndef LCD_FIRSTCOM0  #define LCD_FIRSTCOM0 (0)     /* first com used by this controller */#endif#ifndef LCD_LASTCOM0  #define LCD_LASTCOM0    (LCD_YSIZE-1) /* Contr.0: last com line used */#endif#if (!LCD_SWAP_XY)  #define LCD_XSIZE_PHYS  LCD_XSIZE  #define LCD_YSIZE_PHYS  LCD_YSIZE  #define LCD_VXSIZE_PHYS LCD_VXSIZE  #define LCD_VYSIZE_PHYS LCD_VYSIZE#else  #define LCD_XSIZE_PHYS  LCD_YSIZE  #define LCD_YSIZE_PHYS  LCD_XSIZE  #define LCD_VXSIZE_PHYS LCD_VYSIZE  #define LCD_VYSIZE_PHYS LCD_VXSIZE#endif/************************************************************       Color settings, display 0***********************************************************/#ifndef LCD_REVERSE  #define LCD_REVERSE 0#endif#ifndef LCD_REVERSE_LUT  #define LCD_REVERSE_LUT 0#endif#ifndef LCD_PHYSCOLORS_IN_RAM  #define LCD_PHYSCOLORS_IN_RAM 0#endif#if !defined (LCD_PHYSCOLORS)  #if   (LCD_BITSPERPIXEL == 1) | (LCD_BITSPERPIXEL == 2) | (LCD_BITSPERPIXEL == 4)    #ifndef LCD_FIXEDPALETTE      #define LCD_FIXEDPALETTE LCD_BITSPERPIXEL    #endif  #endif#endif /* defined (LCD_PHYSCOLORS) */#if !defined (LCD_FIXEDPALETTE)  #if !defined (LCD_PHYSCOLORS)    #if LCD_BITSPERPIXEL == 8      #define LCD_FIXEDPALETTE 8666    #elif LCD_BITSPERPIXEL == 12      #define LCD_FIXEDPALETTE 444    #elif LCD_BITSPERPIXEL == 15      #define LCD_FIXEDPALETTE 555    #elif LCD_BITSPERPIXEL == 16      #define LCD_FIXEDPALETTE 565    #else      #define LCD_FIXEDPALETTE 0    #endif  #else    #define LCD_FIXEDPALETTE 0  #endif#endif#if (LCD_BITSPERPIXEL > 8) && defined (LCD_PHYSCOLORS)  #error List of physical colors not permitted if more than 8 bpp are used !#endif#if (LCD_FIXEDPALETTE==0)  #if !defined(LCD_PHYSCOLORS)    #error You have to define a fixed palette (LCD_FIXEDPALETTE) or    #error the list of physical colors (LCD_PHYSCOLORS) in LCDConf.h !  #endif#endif/* In order to avoid warnings for undefined parameters */#ifndef LCD_USE_PARA  #define LCD_USE_PARA(para) para=para;#endif#ifndef LCD_BITSPERPIXEL  #if LCD_BITSPERPIXEL_0 >= LCD_BITSPERPIXEL_1    #define LCD_BITSPERPIXEL LCD_BITSPERPIXEL_0  #else    #define LCD_BITSPERPIXEL LCD_BITSPERPIXEL_1  #endif#endif#if LCD_BITSPERPIXEL <=8  #define LCD_PIXELINDEX U8#else  #define LCD_PIXELINDEX U16#endif/***********************************************************************      Defaults for Display 1 (second display)************************************************************************/#if LCD_NUM_DISPLAYS > 1  #ifndef LCD_MIRROR_X_1    #define LCD_MIRROR_X_1   (0)    /* If active:  X -> -X */  #endif  #ifndef LCD_MIRROR_Y_1    #define LCD_MIRROR_Y_1   (0)    /* If active:  Y -> -Y */  #endif  #ifndef LCD_SWAP_XY_1    #define LCD_SWAP_XY_1    (0)    /* If active:  X <-> Y */  #endif  #ifndef LCD_YMAG_1    #define LCD_YMAG_1 1  #endif  #ifndef LCD_XMAG_1    #define LCD_XMAG_1 1  #endif  #ifndef LCD_VXSIZE_1    #define LCD_VXSIZE_1      (LCD_XSIZE_1 * LCD_XMAG_1) /* virtual x-size */  #endif  #ifndef LCD_VYSIZE_1    #define LCD_VYSIZE_1      (LCD_YSIZE_1 * LCD_YMAG_1) /* virtual y-size */  #endif  #ifndef LCD_NUM_COLORS_1    #define LCD_NUM_COLORS_1 (1L<<LCD_BITSPERPIXEL_1)  #endif  /* Optionally swap red and blue components */  #ifndef LCD_SWAP_RB_1    #define LCD_SWAP_RB_1 0  #endif  /**********************************************************  *  *       Color settings, display 0  *  *********************************************************  */  #ifndef LCD_REVERSE_1    #define LCD_REVERSE_1 0  #endif  #ifndef LCD_REVERSE_LUT_1    #define LCD_REVERSE_LUT_1 0  #endif  #if !defined (LCD_PHYSCOLORS_1)    #if   (LCD_BITSPERPIXEL_1 == 1) | (LCD_BITSPERPIXEL_1 == 2) | (LCD_BITSPERPIXEL_1 == 4)      #ifndef LCD_FIXEDPALETTE_1        #define LCD_FIXEDPALETTE_1 LCD_BITSPERPIXEL_1      #endif    #endif  #endif /* defined (LCD_PHYSCOLORS) */  #if !defined (LCD_FIXEDPALETTE_1)    #if !defined (LCD_PHYSCOLORS_1)      #if LCD_BITSPERPIXEL_1 == 8        #define LCD_FIXEDPALETTE_1 8666      #elif LCD_BITSPERPIXEL_1 == 15        #define LCD_FIXEDPALETTE_1 555      #elif LCD_BITSPERPIXEL_1 == 16        #define LCD_FIXEDPALETTE_1 565      #else        #define LCD_FIXEDPALETTE_1 0      #endif    #else      #define LCD_FIXEDPALETTE_1 0    #endif  #endif  #if (LCD_BITSPERPIXEL_1 > 8) && defined (LCD_PHYSCOLORS_1)    #error List of physical colors not permitted if more than 8 bpp are used !  #endif  #if (LCD_FIXEDPALETTE_1 == 0)    #if !defined(LCD_PHYSCOLORS_1)      #error You have to define a fixed palette (LCD_FIXEDPALETTE_1) or      #error the list of physical colors (LCD_PHYSCOLORS_1) in LCDConf.h !    #endif  #endif#endif   /* LCD_NUM_DISPLAYS > 1 */#endif /* LCD_INTERN_H */