?? lcdconf.h
字號:
/*********************************************************************************************************** uC/GUI* Universal graphic software for embedded applications** (c) Copyright 2002, Micrium Inc., Weston, FL* (c) Copyright 2002, SEGGER Microcontroller Systeme GmbH** 礐/GUI is protected by international copyright laws. Knowledge of the* source code may not be used to write a similar product. This file may* only be used in accordance with a license and should not be redistributed* in any way. We appreciate your understanding and fairness.*----------------------------------------------------------------------File : LCDConf_1375_C8_C320x240.hPurpose : Sample configuration file----------------------------------------------------------------------*/#ifndef __LCDCONF_H#define __LCDCONF_H/*********************************************************************** General configuration of LCD************************************************************************/#define LCD_XSIZE (240) /* X-resolution of LCD, Logical coor. */#define LCD_YSIZE (320) /* Y-resolution of LCD, Logical coor. */#define LCD_BITSPERPIXEL (8) // Bpp.#define LCD_BUSWIDTH (8)#define LCD_CONTROLLER 1375 // 控制器型號.#define LCD_FIXEDPALETTE (323)#define LCD_SWAP_RB 1 // 紅綠位置交換./********************************************************************** Full bus configuration***********************************************************************//*#define LCD_READ_MEM(Off) *((U16*) (0xc00000+(((U32)(Off))<<1)))#define LCD_WRITE_MEM(Off,data) *((U16*) (0xc00000+(((U32)(Off))<<1)))=data#define LCD_READ_REG(Off) *((volatile U16*)(0xc1ffe0+(((U16)(Off))<<1)))#define LCD_WRITE_REG(Off,data) *((volatile U16*)(0xc1ffe0+(((U16)(Off))<<1)))=data// 將所有對 Video RAM 的操作放在 LCD13XX.C 文件中, 避免編譯問題.*//********************************************************************** Init sequence for 8 bit access***********************************************************************/extern void s3c44b0x_LCD_Init (void); // 初始化 LCD 控制器.#define LCD_INIT_CONTROLLER() s3c44b0x_LCD_Init ()#endif /* LCDCONF_H */
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -