/*++

Copyright (c) Microsoft Corporation. All rights reserved.

Module Name:

        USBDI.H

Abstract:

   structures common to the USBD and USB device drivers.

Environment:

    Kernel & user mode

Revision History:

    09-29-95 : created

--*/

#ifndef   __USBDI_H__
#define   __USBDI_H__

/*
Anonymous structures have been removed, if your driver relies on these then 
you must build with the following macro defined.

#define OSR21_COMPAT
*/

#ifndef _NTDDK_
#ifndef _WDMDDK_
typedef PVOID PIRP;
typedef PVOID PMDL;
#endif
#endif

#define USBDI_VERSION    0x300

#include "usbioctl.h"
//
// USB defined structures and constants
// (see chapter 9 of USB specification)
//

#define USB_DEFAULT_DEVICE_ADDRESS     0
#define USB_DEFAULT_ENDPOINT_ADDRESS   0

//
// max packet size (bytes) for default endpoint
// until SET_ADDRESS command is received.
//

#define USB_DEFAULT_MAX_PACKET         64

//
// USBD interface structures and constants
//


#define URB_FROM_IRP(Irp) ((IoGetCurrentIrpStackLocation(Irp))->Parameters.Others.Argument1)

//
//  URB request codes
//
                                                    
#define URB_FUNCTION_SELECT_CONFIGURATION            0x0000
#define URB_FUNCTION_SELECT_INTERFACE                0x0001
#define URB_FUNCTION_ABORT_PIPE                      0x0002
#define URB_FUNCTION_TAKE_FRAME_LENGTH_CONTROL       0x0003
#define URB_FUNCTION_RELEASE_FRAME_LENGTH_CONTROL    0x0004
#define URB_FUNCTION_GET_FRAME_LENGTH                0x0005
#define URB_FUNCTION_SET_FRAME_LENGTH                0x0006
#define URB_FUNCTION_GET_CURRENT_FRAME_NUMBER        0x0007
#define URB_FUNCTION_CONTROL_TRANSFER                0x0008
#define URB_FUNCTION_BULK_OR_INTERRUPT_TRANSFER      0x0009
#define URB_FUNCTION_ISOCH_TRANSFER                  0x000A
#define URB_FUNCTION_RESET_PIPE                      0x001E

//
// These functions correspond
// to the standard commands on the default pipe
//
// direction is implied
//

#define URB_FUNCTION_GET_DESCRIPTOR_FROM_DEVICE     0x000B
#define URB_FUNCTION_GET_DESCRIPTOR_FROM_ENDPOINT   0x0024
#define URB_FUNCTION_GET_DESCRIPTOR_FROM_INTERFACE  0x0028
                                                           
#define URB_FUNCTION_SET_DESCRIPTOR_TO_DEVICE       0x000C
#define URB_FUNCTION_SET_DESCRIPTOR_TO_ENDPOINT     0x0025
#define URB_FUNCTION_SET_DESCRIPTOR_TO_INTERFACE    0x0029

#define URB_FUNCTION_SET_FEATURE_TO_DEVICE          0x000D
#define URB_FUNCTION_SET_FEATURE_TO_INTERFACE       0x000E
#define URB_FUNCTION_SET_FEATURE_TO_ENDPOINT        0x000F
#define URB_FUNCTION_SET_FEATURE_TO_OTHER           0x0023

#define URB_FUNCTION_CLEAR_FEATURE_TO_DEVICE        0x0010
#define URB_FUNCTION_CLEAR_FEATURE_TO_INTERFACE     0x0011
#define URB_FUNCTION_CLEAR_FEATURE_TO_ENDPOINT      0x0012
#define URB_FUNCTION_CLEAR_FEATURE_TO_OTHER         0x0022

#define URB_FUNCTION_GET_STATUS_FROM_DEVICE         0x0013
#define URB_FUNCTION_GET_STATUS_FROM_INTERFACE      0x0014
#define URB_FUNCTION_GET_STATUS_FROM_ENDPOINT       0x0015
#define URB_FUNCTION_GET_STATUS_FROM_OTHER          0x0021

// direction is specified in TransferFlags

#define URB_FUNCTION_RESERVED0                      0x0016

//
// These are for sending vendor and class commands
// on the default pipe
//
// direction is specified in TransferFlags
//

#define URB_FUNCTION_VENDOR_DEVICE                   0x0017
#define URB_FUNCTION_VENDOR_INTERFACE                0x0018
#define URB_FUNCTION_VENDOR_ENDPOINT                 0x0019
#define URB_FUNCTION_VENDOR_OTHER                    0x0020

#define URB_FUNCTION_CLASS_DEVICE                    0x001A
#define URB_FUNCTION_CLASS_INTERFACE                 0x001B
#define URB_FUNCTION_CLASS_ENDPOINT                  0x001C
#define URB_FUNCTION_CLASS_OTHER                     0x001F

//
// Reserved function codes
//                                                                                                        
#define URB_FUNCTION_RESERVED                        0x001D

#define URB_FUNCTION_GET_CONFIGURATION               0x0026
#define URB_FUNCTION_GET_INTERFACE                   0x0027
                    
#define URB_FUNCTION_LAST                            0x0029

//
// Values for URB TransferFlags Field
//
#define USBD_TRANSFER_DIRECTION(x)            ((x) & USBD_TRANSFER_DIRECTION_IN)

#define USBD_TRANSFER_DIRECTION_OUT           0   

#define USBD_TRANSFER_DIRECTION_BIT           0
#define USBD_TRANSFER_DIRECTION_IN            (1<<USBD_TRANSFER_DIRECTION_BIT)

#define USBD_SHORT_TRANSFER_OK_BIT            1
#define USBD_SHORT_TRANSFER_OK                (1<<USBD_SHORT_TRANSFER_OK_BIT)

#define USBD_START_ISO_TRANSFER_ASAP_BIT      2
#define USBD_START_ISO_TRANSFER_ASAP          (1<<USBD_START_ISO_TRANSFER_ASAP_BIT)


#define USBD_ISO_START_FRAME_RANGE            1024

typedef LONG USBD_STATUS;

//
// USBD status codes
//
//  Status values are 32 bit values layed out as follows:
//
//   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
//   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
//  +---+---------------------------+-------------------------------+
//  | S |               Status Code                                 |
//  +---+---------------------------+-------------------------------+
//
//  where
//
//      S - is the state code
//
//          00 - completed with success
//          01 - request is pending
//          10 - completed with error, endpoint not stalled
//          11 - completed with error, endpoint stalled
//
//
//      Code - is the status code
//

//
// Generic test for success on any status value (non-negative numbers
// indicate success).
//

#define USBD_SUCCESS(Status) ((USBD_STATUS)(Status) >= 0)

//
// Generic test for pending status value.
//

#define USBD_PENDING(Status) ((ULONG)(Status) >> 30 == 1)

//
// Generic test for error on any status value.
//

#define USBD_ERROR(Status) ((USBD_STATUS)(Status) < 0)

//
// Generic test for stall on any status value.
//

#define USBD_HALTED(Status) ((ULONG)(Status) >> 30 == 3)

//
// Macro to check the status code only
//

#define USBD_STATUS(Status) ((ULONG)(Status) & 0x0FFFFFFFL)


#define USBD_STATUS_SUCCESS                  ((USBD_STATUS)0x00000000L)
#define USBD_STATUS_PENDING                  ((USBD_STATUS)0x40000000L)
#define USBD_STATUS_HALTED                   ((USBD_STATUS)0xC0000000L)
#define USBD_STATUS_ERROR                    ((USBD_STATUS)0x80000000L)

//
// HC status codes
// Note: these status codes have both the error and the stall bit set.
//
#define USBD_STATUS_CRC                      ((USBD_STATUS)0xC0000001L)
#define USBD_STATUS_BTSTUFF                  ((USBD_STATUS)0xC0000002L)
#define USBD_STATUS_DATA_TOGGLE_MISMATCH     ((USBD_STATUS)0xC0000003L)
#define USBD_STATUS_STALL_PID                ((USBD_STATUS)0xC0000004L)
#define USBD_STATUS_DEV_NOT_RESPONDING       ((USBD_STATUS)0xC0000005L)
#define USBD_STATUS_PID_CHECK_FAILURE        ((USBD_STATUS)0xC0000006L)
#define USBD_STATUS_UNEXPECTED_PID           ((USBD_STATUS)0xC0000007L)
#define USBD_STATUS_DATA_OVERRUN             ((USBD_STATUS)0xC0000008L)
#define USBD_STATUS_DATA_UNDERRUN            ((USBD_STATUS)0xC0000009L)
#define USBD_STATUS_RESERVED1                ((USBD_STATUS)0xC000000AL)
#define USBD_STATUS_RESERVED2                ((USBD_STATUS)0xC000000BL)
#define USBD_STATUS_BUFFER_OVERRUN           ((USBD_STATUS)0xC000000CL)
#define USBD_STATUS_BUFFER_UNDERRUN          ((USBD_STATUS)0xC000000DL)
#define USBD_STATUS_NOT_ACCESSED             ((USBD_STATUS)0xC000000FL)
#define USBD_STATUS_FIFO                     ((USBD_STATUS)0xC0000010L)

//
// returned by HCD if a transfer is submitted to an endpoint that is 
// stalled
//
#define USBD_STATUS_ENDPOINT_HALTED         ((USBD_STATUS)0xC0000030L)

//
// Software status codes
// Note: the following status codes have only the error bit set
//
#define USBD_STATUS_NO_MEMORY                ((USBD_STATUS)0x80000100L)
#define USBD_STATUS_INVALID_URB_FUNCTION     ((USBD_STATUS)0x80000200L)
#define USBD_STATUS_INVALID_PARAMETER        ((USBD_STATUS)0x80000300L)

//
// returned if client driver attempts to close an endpoint/interface
// or configuration with outstanding transfers.
//
#define USBD_STATUS_ERROR_BUSY               ((USBD_STATUS)0x80000400L)
//
// returned by USBD if it cannot complete a URB request, typically this 
// will be returned in the URB status field when the Irp is completed
// with a more specific NT error code in the irp.status field.
//
#define USBD_STATUS_REQUEST_FAILED           ((USBD_STATUS)0x80000500L)

#define USBD_STATUS_INVALID_PIPE_HANDLE      ((USBD_STATUS)0x80000600L)

// returned when there is not enough bandwidth avialable
// to open a requested endpoint
#define USBD_STATUS_NO_BANDWIDTH             ((USBD_STATUS)0x80000700L)
//
// generic HC error
// 
#define USBD_STATUS_INTERNAL_HC_ERROR        ((USBD_STATUS)0x80000800L)
//
// returned when a short packet terminates the transfer
// ie USBD_SHORT_TRANSFER_OK bit not set
// 
#define USBD_STATUS_ERROR_SHORT_TRANSFER     ((USBD_STATUS)0x80000900L)
// 
// returned if the requested start frame is not within
// USBD_ISO_START_FRAME_RANGE of the current USB frame, 
// note that the stall bit is set
// 
#define USBD_STATUS_BAD_START_FRAME          ((USBD_STATUS)0xC0000A00L)
//
// returned by HCD if all packets in an iso transfer complete with an error 
//
#define USBD_STATUS_ISOCH_REQUEST_FAILED     ((USBD_STATUS)0xC0000B00L)
//
// returned by USBD if the frame length control for a given 
// HC is already taken by anothe driver
//
#define USBD_STATUS_FRAME_CONTROL_OWNED      ((USBD_STATUS)0xC0000C00L)
//
// returned by USBD if the caller does not own frame length control and
// attempts to release or modify the HC frame length
//
#define USBD_STATUS_FRAME_CONTROL_NOT_OWNED  ((USBD_STATUS)0xC0000D00L)

//
// set when a transfers is completed due to an AbortPipe request from
// the client driver
//
// Note: no error or stall bit is set for these status codes
//
#define USBD_STATUS_CANCELED                 ((USBD_STATUS)0x00010000L)

#define USBD_STATUS_CANCELING                ((USBD_STATUS)0x00020000L)

// 
// taken from usb.h
#define USBD_STATUS_INAVLID_CONFIGURATION_DESCRIPTOR \
                                             ((USBD_STATUS)0xC0000F00L)


typedef PVOID USBD_PIPE_HANDLE;
typedef PVOID USBD_CONFIGURATION_HANDLE;
typedef PVOID USBD_INTERFACE_HANDLE;

//
// Value used to indicate the default max transfer size
//

#define USBD_DEFAULT_MAXIMUM_TRANSFER_SIZE  PAGE_SIZE


// 
// structure returned from USBD_GetVersion function
//

typedef struct _USBD_VERSION_INFORMATION {
    ULONG USBDI_Version;          //BCD usb interface version number
    ULONG Supported_USB_Version;  //BCD USB spec version number
} USBD_VERSION_INFORMATION, *PUSBD_VERSION_INFORMATION;

typedef enum _USBD_PIPE_TYPE {
    UsbdPipeTypeControl,
    UsbdPipeTypeIsochronous,
    UsbdPipeTypeBulk,
    UsbdPipeTypeInterrupt
} USBD_PIPE_TYPE;

#define USBD_PIPE_DIRECTION_IN(pipeInformation) ((pipeInformation)->EndpointAddress & \
                                                  USB_ENDPOINT_DIRECTION_MASK) 

typedef struct _USBD_DEVICE_INFORMATION {
    ULONG OffsetNext;
    PVOID UsbdDeviceHandle;
    USB_DEVICE_DESCRIPTOR DeviceDescriptor;
} USBD_DEVICE_INFORMATION, *PUSBD_DEVICE_INFORMATION;

//
//      URB request structures
//

//
// USBD pipe information structure, this structure
// is returned for each pipe opened thru an
// SELECT_CONFIGURATION or SELECT_INTERFACE request.
//

typedef struct _USBD_PIPE_INFORMATION {
    //
    // OUTPUT
    // These fields are filled in by USBD
    //
    USHORT MaximumPacketSize;  // Maximum packet size for this pipe
    UCHAR EndpointAddress;     // 8 bit USB endpoint address (includes direction)
                               // taken from endpoint descriptor
    UCHAR Interval;            // Polling interval in ms if interrupt pipe 
    
    USBD_PIPE_TYPE PipeType;   // PipeType identifies type of transfer valid for this pipe
    USBD_PIPE_HANDLE PipeHandle;
    
    //
    // INPUT
    // These fields are filled in by the client driver
    //
    ULONG MaximumTransferSize; // Maximum size for a single request
                               // in bytes.
    ULONG PipeFlags;
} USBD_PIPE_INFORMATION, *PUSBD_PIPE_INFORMATION;

//
// values for PipeFlags field in USBD_PIPE_INFORMATION field
//

#define USBD_PF_CHANGE_MAX_PACKET       0x00000001
#define USBD_PF_DOUBLE_BUFFER           0x00000002 
#define USBD_PF_ENABLE_RT_THREAD_ACCESS 0x00000004 
#define USBD_PF_MAP_ADD_TRANSFERS       0x00000008

#define USBD_PF_VALID_MASK    (USBD_PF_CHANGE_MAX_PACKET | \
                               USBD_PF_DOUBLE_BUFFER | \
                               USBD_PF_ENABLE_RT_THREAD_ACCESS | \
                               USBD_PF_MAP_ADD_TRANSFERS)
//
// USBD interface information structure, this structure
// is returned for each interface opened thru an
// SELECT_CONFIGURATION or SELECT_INTERFACE request.
//

typedef struct _USBD_INTERFACE_INFORMATION {
    USHORT Length;       // Length of this structure, including
                         // all pipe information structures that
                         // follow.
    //
    // INPUT
    //
    // Interface number and Alternate setting this
    // structure is associated with
    //
    UCHAR InterfaceNumber;