?? callerview.cpp
字號:
// CallerView.cpp : implementation of the CCallerView class
//
#include "stdafx.h"
#include "Caller.h"
#include "CallerDoc.h"
#include "CallerView.h"
#include "ConfigSerial.h"
#include "XRichEditCtrl.h"
//#include "CallerEdit.h"
#include "ConfigCmd.h"
#include "CntrItem.h"
#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
CXRichEditCtrl RichCtrl;
CSerialPort m_ComPort;
#define LN_COL_MSG(lparam) ::PostMessage(GetParent()->m_hWnd,WM_XRICHEDIT_MSG,\
(WPARAM)1,lparam);
/////////////////////////////////////////////////////////////////////////////
// CCallerView
IMPLEMENT_DYNCREATE(CCallerView, CRichEditView)
BEGIN_MESSAGE_MAP(CCallerView, CRichEditView)
//{{AFX_MSG_MAP(CCallerView)
ON_COMMAND(ID_CONFIG_SERIAL, OnConfigSerial)
ON_COMMAND(ID_FUNC1_FUNC1, OnFunc1Func1)
ON_COMMAND(IDC_CONFIG_CLEAR, OnConfigClear)
ON_COMMAND(ID_FUNC1_FUNC2, OnFunc1Func2)
ON_COMMAND(ID_FUNC1_FUNC3, OnFunc1Func3)
ON_COMMAND(ID_FUNC2_FUNC1, OnFunc2Func1)
ON_COMMAND(ID_FUNC2_FUNC2, OnFunc2Func2)
ON_COMMAND(ID_FUNC2_FUNC3, OnFunc2Func3)
ON_COMMAND(ID_FUNC2_FUNC4, OnFunc2Func4)
ON_COMMAND(ID_FUNC2_FUNC5, OnFunc2Func5)
ON_WM_DESTROY()
ON_WM_KEYDOWN()
ON_WM_LBUTTONDOWN()
ON_COMMAND(IDD_CONFIG_SERIAL, OnConfigSerial)
ON_COMMAND(ID_CONFIG_COMMAND, OnConfigCommand)
//}}AFX_MSG_MAP
// Standard printing commands
ON_COMMAND(ID_FILE_PRINT, CRichEditView::OnFilePrint)
ON_COMMAND(ID_FILE_PRINT_DIRECT, CRichEditView::OnFilePrint)
ON_COMMAND(ID_FILE_PRINT_PREVIEW, CRichEditView::OnFilePrintPreview)
ON_MESSAGE(WM_COMM_RXCHAR, OnCommunication)
END_MESSAGE_MAP()
// ON_MESSAGE(WM_COMM_RXCHAR, OnCommunication)
/////////////////////////////////////////////////////////////////////////////
// CCallerView construction/destruction
//##ModelId=3FFC8F3A0159
CCallerView::CCallerView()
{
CString str;
// TODO: add construction code here
// Initialize serial port
if (m_ComPort.InitPort(this,1,19200,'N',8,1,EV_RXFLAG | EV_RXCHAR,512))
{
//start monitor process
m_ComPort.StartMonitoring();
}
else
{
CString str;
str.Format("無法初始化COM%d ",1);
AfxMessageBox(str);
}
// char mode
m_bDataMode = 0;
m_bDataDisp = 0;
// clear checksum
m_chChecksum=0;
m_bRXDataTimeout = FALSE;
m_unReceiveTimeOut = 20;
m_hWnd = (CWnd*)AfxGetApp()->m_pMainWnd;
// disable The user Config command line
int i = 0;
int j = 0;
for ( i = 0; i < 2; i ++ )
{
for ( j = 0; j < 5; j ++ )
{
// CmdLineInfo.m_bCmdLineEn[i][j] = FALSE;
// CmdLineInfo.m_strCmdLine
m_CmdLine[i][j].m_bCmdLineEn = FALSE;
m_CmdLine[i][j].m_strCmdLine.Format("");
}
}
}
//##ModelId=3FFC8F3A029F
CCallerView::~CCallerView()
{
}
//##ModelId=3FFC8F3A01F4
BOOL CCallerView::PreCreateWindow(CREATESTRUCT& cs)
{
// TODO: Modify the Window class or styles here by modifying
// the CREATESTRUCT cs
BOOL bResult = CRichEditView::PreCreateWindow (cs);
//
cs.style &= ~(ES_AUTOHSCROLL|WS_HSCROLL);
return bResult ;
}
/////////////////////////////////////////////////////////////////////////////
// CCallerView drawing
//##ModelId=3FFC8F3A01E9
void CCallerView::OnDraw(CDC* pDC)
{
CCallerDoc* pDoc = GetDocument();
ASSERT_VALID(pDoc);
// TODO: add draw code for native data here
}
/////////////////////////////////////////////////////////////////////////////
// CCallerView printing
//##ModelId=3FFC8F3A0205
BOOL CCallerView::OnPreparePrinting(CPrintInfo* pInfo)
{
// default preparation
return DoPreparePrinting(pInfo);
}
//##ModelId=3FFC8F3A0215
void CCallerView::OnBeginPrinting(CDC* /*pDC*/, CPrintInfo* /*pInfo*/)
{
// TODO: add extra initialization before printing
}
//##ModelId=3FFC8F3A0232
void CCallerView::OnEndPrinting(CDC* /*pDC*/, CPrintInfo* /*pInfo*/)
{
// TODO: add cleanup after printing
}
//##ModelId=3FFC8F3A030D
void CCallerView::OnDestroy()
{
CRichEditView::OnDestroy();
// TODO: Add your message handler code here
COleClientItem* pActiveItem = GetDocument()->GetInPlaceActiveItem(this);
if (pActiveItem != NULL && pActiveItem->GetActiveView() == this)
{
pActiveItem->Deactivate();
ASSERT(GetDocument()->GetInPlaceActiveItem(this) == NULL);
}
}
/////////////////////////////////////////////////////////////////////////////
// CCallerView diagnostics
#ifdef _DEBUG
//##ModelId=3FFC8F3A02A1
void CCallerView::AssertValid() const
{
CRichEditView::AssertValid();
}
//##ModelId=3FFC8F3A02AF
void CCallerView::Dump(CDumpContext& dc) const
{
CRichEditView::Dump(dc);
}
//##ModelId=3FFC8F3A01C6
CCallerDoc* CCallerView::GetDocument() // non-debug version is inline
{
ASSERT(m_pDocument->IsKindOf(RUNTIME_CLASS(CCallerDoc)));
return (CCallerDoc*)m_pDocument;
}
#endif //_DEBUG
/////////////////////////////////////////////////////////////////////////////
// CCallerView message handlers
//##ModelId=3FFC8F3A032F
LONG CCallerView::OnCommunication(WPARAM ch, LPARAM port)
{
static int BuffIndex = 0;
static char char_old;
CString str;
CRichEditCtrl& edit=GetRichEditCtrl();
CCallerDoc *pDoc = GetDocument();
int nTextLength;
CString strtemp;
m_nRXCounterCOM1++;
nTextLength = edit.GetWindowTextLength();
LARGE_INTEGER litmp;
LONGLONG QPart;
double dfMinus = 0;
double dfFreq = 0;
double dfTim = 0;
QueryPerformanceFrequency(&litmp);
dfFreq = (double)litmp.QuadPart;
QueryPerformanceCounter(&litmp);
QPart = litmp.QuadPart;
dfMinus = ( double )( QPart-QPart_old );
dfTim = dfMinus / dfFreq;
if ( dfTim > ( 0.001 * m_unReceiveTimeOut ) ) // micro seconds
{
m_bRXDataTimeout = TRUE;
}
/////
QPart_old = QPart;
dfFreq_old = dfFreq;
if( m_bRXDataTimeout)
{
strtemp += "\r\n";
m_bRXDataTimeout = FALSE;
str = " Answer:";
if(m_bDataMode)
{
str += "( Hex )";
}
else
{
str += "( ASCII )";
}
PutMessage( str );
}
if(m_bDataDisp)
{
//send char to strtemp with HEX format
strtemp.Format("%02X ",ch);
}
else
{
switch (ch)
{
//
case '\n':
strtemp += "\r\n";
break;
case '\r':
break;
default:
strtemp += ch;
}
}
// save current char from serial port
char_old = ch;
// All the text in the edit control is selected
edit.SetSel( -1, 0);
// Updata the edit control
edit.ReplaceSel(strtemp);
// strtemp.ReleaseBuffer();
return (LONG)0;
}
//##ModelId=3FFC8F3A0203
void CCallerView::OnInitialUpdate()
{
CRichEditView::OnInitialUpdate();
// TODO: Add your specialized code here and/or call the base class
}
//##ModelId=3FFC8F3A02BF
void CCallerView::OnConfigSerial()
{
// TODO: Add your command handler code here
CConfigSerial * dlg = new CConfigSerial(this, m_ComPort.GetDCB());
// get data transf mode
dlg->m_bHexSend = m_bDataMode;
dlg->m_ctrlHexDisp = m_bDataDisp;
dlg->m_unReceiveTimeout = m_unReceiveTimeOut;
if (dlg->DoModal() == IDOK)
{
m_bDataMode = dlg->m_ctrlHexSend;
m_bDataDisp = dlg->m_ctrlHexDisp;
CString strtemp = dlg->m_strBandRate;
m_nBandRate = _ttoi( strtemp);
m_unReceiveTimeOut = dlg->m_unReceiveTimeout;
if( dlg->m_bBandChange)
{
m_ComPort.InitPort(this, 1, m_nBandRate, 'N', 8, 1, EV_RXFLAG | EV_RXCHAR, 512);
m_ComPort.StartMonitoring();
}
delete dlg;
// check command format if hexmode is selected
if ( m_bDataMode )
{
CheckCmdFormat();
}
}
}
//##ModelId=3FFC8F3A034B
void CCallerView::OnConfigCommand()
{
// TODO: Add your command handler code here
//CConfigCmd *pDlg = (CConfigCmd *)GetDlgItem(IDD_CONFIG_COMMAND);
CConfigCmd dlg;
//-------
// Command line enable flag
dlg.m_bCmd11En = m_CmdLine[0][0].m_bCmdLineEn;
dlg.m_bCmd12En = m_CmdLine[0][1].m_bCmdLineEn;
dlg.m_bCmd13En = m_CmdLine[0][2].m_bCmdLineEn;
dlg.m_bCmd21En = m_CmdLine[1][0].m_bCmdLineEn;
dlg.m_bCmd22En = m_CmdLine[1][1].m_bCmdLineEn;
dlg.m_bCmd23En = m_CmdLine[1][2].m_bCmdLineEn;
dlg.m_bCmd24En = m_CmdLine[1][3].m_bCmdLineEn;
dlg.m_bCmd25En = m_CmdLine[1][4].m_bCmdLineEn;
//-------
// set dlg Command text
dlg.m_strCmdLine11Text = m_CmdLine[0][0].m_strCmdLine;
dlg.m_strCmdLine12Text = m_CmdLine[0][1].m_strCmdLine;
dlg.m_strCmdLine13Text = m_CmdLine[0][2].m_strCmdLine;
dlg.m_strCmdLine21Text = m_CmdLine[1][0].m_strCmdLine;
dlg.m_strCmdLine22Text = m_CmdLine[1][1].m_strCmdLine;
dlg.m_strCmdLine23Text = m_CmdLine[1][2].m_strCmdLine;
dlg.m_strCmdLine24Text = m_CmdLine[1][3].m_strCmdLine;
dlg.m_strCmdLine25Text = m_CmdLine[1][4].m_strCmdLine;
//-----
if( IDOK == dlg.DoModal() )
{
// Get Command line Active flag 1:Active; 0 no Active
m_CmdLine[0][0].m_bCmdLineEn = dlg.m_bCmd11En;
m_CmdLine[0][1].m_bCmdLineEn = dlg.m_bCmd12En;
m_CmdLine[0][2].m_bCmdLineEn = dlg.m_bCmd13En;
m_CmdLine[1][0].m_bCmdLineEn = dlg.m_bCmd21En;
m_CmdLine[1][1].m_bCmdLineEn = dlg.m_bCmd22En;
m_CmdLine[1][2].m_bCmdLineEn = dlg.m_bCmd23En;
m_CmdLine[1][3].m_bCmdLineEn = dlg.m_bCmd24En;
m_CmdLine[1][4].m_bCmdLineEn = dlg.m_bCmd25En;
//-------
// Get dlg Command text
m_CmdLine[0][0].m_strCmdLine = dlg.m_strCmdLine11Text;
m_CmdLine[0][1].m_strCmdLine = dlg.m_strCmdLine12Text;
m_CmdLine[0][2].m_strCmdLine = dlg.m_strCmdLine13Text;
m_CmdLine[1][0].m_strCmdLine = dlg.m_strCmdLine21Text;
m_CmdLine[1][1].m_strCmdLine = dlg.m_strCmdLine22Text;
m_CmdLine[1][2].m_strCmdLine = dlg.m_strCmdLine23Text;
m_CmdLine[1][3].m_strCmdLine = dlg.m_strCmdLine24Text;
m_CmdLine[1][4].m_strCmdLine = dlg.m_strCmdLine25Text;
//-----
if ( m_bDataMode )
{
CheckCmdFormat();
}
}
}
//
//
//
//##ModelId=3FFC8F3A0283
char CCallerView::Char2Hex(char ch)
{
if((ch>='0')&&(ch<='9'))
{
return ch-0x30;
}
else if ((ch>='A')&&(ch<='F'))
{
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -