/**************************************************************
 NAME: usbsetup.c
 DESC: process the USB setup stage operations.
 HISTORY:
 MAR.25.2002:purnnamu: S3C2400X usbsetup.c is ported for S3C2410X.
 AUG.20.2002:purnnamu: rEP0_CSR should be used instead of rOUT_CSR1_REG for EP0 macros.
 **************************************************************/
#include "option.h"
#include "2410addr.h"
#include "2410lib.h"
#include "def.h"

#include "2410usb.h"
#include "usb.h"
#include "usblib.h"
#include "usbsetup.h"

// *** End point information ***
//   EP0: control
//   EP1: bulk in end point
//   EP2: not used
//   EP3: bulk out end point
//   EP4: not used

// *** VERY IMPORTANT NOTE ***
// Every descriptor size of EP0 should be 8n+m(m=1~7).
// Otherwise, USB will not operate normally because the program
// doesn't prepare the case that the descriptor size is 8n+0.
// If the size of a descriptor is 8n, the 0 length packit should be sent. 
// Special thanks to E.S.Choi for reminding me of this USB specification.


// ===================================================================
// All following commands will operate only in case 
// - ep0_csr is valid.
// ===================================================================
#define CLR_EP0_OUT_PKT_RDY() 		rEP0_CSR=( ep0_csr & (~EP0_WR_BITS)| \
						EP0_SERVICED_OUT_PKT_RDY )	 
#define CLR_EP0_OUTPKTRDY_DATAEND() 	rEP0_CSR=( ep0_csr & (~EP0_WR_BITS)| \
						(EP0_SERVICED_OUT_PKT_RDY|EP0_DATA_END) )	 
					
#define SET_EP0_IN_PKT_RDY() 		rEP0_CSR=( ep0_csr & (~EP0_WR_BITS)| \
						(EP0_IN_PKT_READY) )	 
#define SET_EP0_INPKTRDY_DATAEND() 	rEP0_CSR=( ep0_csr & (~EP0_WR_BITS)| \
						(EP0_IN_PKT_READY|EP0_DATA_END) )	 
					
#define CLR_EP0_SETUP_END() 		rEP0_CSR=( ep0_csr & (~EP0_WR_BITS)| \
						(EP0_SERVICED_SETUP_END) )

#define CLR_EP0_SENT_STALL() 		rEP0_CSR=( ep0_csr & (~EP0_WR_BITS)& \
						(~EP0_SENT_STALL) )

#define FLUSH_EP0_FIFO() 		{register i;while(rOUT_FIFO_CNT1_REG)i=rEP0_FIFO;}

U32 ep0State;
U32 ep0SubState;

extern volatile int isUsbdSetConfiguration;

struct USB_SETUP_DATA descSetup;
struct USB_DEVICE_DESCRIPTOR descDev;
struct USB_CONFIGURATION_DESCRIPTOR descConf;
struct USB_INTERFACE_DESCRIPTOR descIf;
struct USB_ENDPOINT_DESCRIPTOR descEndpt0;
struct USB_ENDPOINT_DESCRIPTOR descEndpt1;




static const U8 descStr0[]={
	4,STRING_TYPE,LANGID_US_L,LANGID_US_H,  //codes representing languages
    };

static const U8 descStr1[]={  //Manufacturer  
        (0x14+2),STRING_TYPE, 
        'S',0x0,'y',0x0,'s',0x0,'t',0x0,'e',0x0,'m',0x0,' ',0x0,'M',0x0,
        'C',0x0,'U',0x0,
    };
    
static const U8 descStr2[]={  //Product  
        (0x2a+2),STRING_TYPE, 
        'S',0x0,'E',0x0,'C',0x0,' ',0x0,'S',0x0,'3',0x0,'C',0x0,'2',0x0,
        '4',0x0,'1',0x0,'0',0x0,'X',0x0,' ',0x0,'T',0x0,'e',0x0,'s',0x0,
        't',0x0,' ',0x0,'B',0x0,'/',0x0,'D',0x0
    };


void Ep0Handler(void)
{
    static int ep0SubState;
//    int i;
    U8 ep0_csr;

    rINDEX_REG=0;
    ep0_csr=rEP0_CSR;
    
//    DbgOut("<0:%x]",ep0_csr);

    //DATAEND interrupt(ep0_csr==0x0) will be ignored 
    //because ep0State==EP0_STATE_INIT when the DATAEND interrupt is issued.    	
    
    if(ep0_csr & EP0_SETUP_END)
    {   
    	 // Host may end GET_DESCRIPTOR operation without completing the IN data stage.
    	 // If host does that, SETUP_END bit will be set.
    	 // OUT_PKT_RDY has to be also cleared because status stage sets OUT_PKT_RDY to 1.
//   	DbgOut("[SETUPEND]");
		CLR_EP0_SETUP_END();
		if(ep0_csr & EP0_OUT_PKT_READY) 
		{
		    FLUSH_EP0_FIFO(); //(???)
	    	//I think this isn't needed because EP0 flush is done automatically.   
	    	CLR_EP0_OUT_PKT_RDY();
		}
	
		ep0State=EP0_STATE_INIT;
		return;
    }	

    //I think that EP0_SENT_STALL will not be set to 1.
    if(ep0_csr & EP0_SENT_STALL)
    {   
//		DbgOut("[STALL]");
	   	CLR_EP0_SENT_STALL();
		if(ep0_csr & EP0_OUT_PKT_READY) 
		{
		    CLR_EP0_OUT_PKT_RDY();
		}
	
		ep0State=EP0_STATE_INIT;
		return;
    }

    if((ep0_csr & EP0_OUT_PKT_READY) && (ep0State==EP0_STATE_INIT))
    {	
		RdPktEp0((U8 *)&descSetup,EP0_PKT_SIZE);
    
    	/*{				//changed by gongjun
			int i;
			for(i=0; i<EP0_PKT_SIZE; i++)
				printf("%x,", ((U8 *)&descSetup)[i]);
			putch('\n');
		}*/				//changed by gongjun
    
		switch(descSetup.bRequest)
    	{
    	case GET_DESCRIPTOR:
            switch(descSetup.bValueH)        
            {
            case DEVICE_TYPE:
// 	    		DbgOut("[GDD]");
	 	    	CLR_EP0_OUT_PKT_RDY();
		    	ep0State=EP0_STATE_GD_DEV_0;	        
	    		break;	
	    		
		    case CONFIGURATION_TYPE:
// 			   	DbgOut("[GDC]");
 	    		CLR_EP0_OUT_PKT_RDY();
	 	    	if((descSetup.bLengthL+(descSetup.bLengthH<<8))>0x9)
 	    	  //bLengthH should be used for bLength=0x209 at WIN2K.    	
		    	    ep0State=EP0_STATE_GD_CFG_0; //for WIN98,WIN2K
				else	    	    
	  			    ep0State=EP0_STATE_GD_CFG_ONLY_0; //for WIN2K
			    break;
			    
	   	    case STRING_TYPE:
// 		    	DbgOut("[GDS]");
 	    		CLR_EP0_OUT_PKT_RDY();
	    		switch(descSetup.bValueL)
	    		{
	    	    case 0:
	    	    	ep0State=EP0_STATE_GD_STR_I0;
	    	    	break;
	    	    case 1:
       	    		ep0State=EP0_STATE_GD_STR_I1;
	    	    	break;
	    	    case 2:	
	    	    	ep0State=EP0_STATE_GD_STR_I2;
	    	    	break;
	    	    default:
//	    			DbgOut("[UE:STRI?]");
	    			break;
	    		}
		    	ep0SubState=0;
		    	break;
		    	
	    	case INTERFACE_TYPE:
// 	    		DbgOut("[GDI]");
	 	    	CLR_EP0_OUT_PKT_RDY();
		    	ep0State=EP0_STATE_GD_IF_ONLY_0; //for WIN98
	    		break;
	    		
		    case ENDPOINT_TYPE:	    	
// 		    	DbgOut("[GDE]");
 	    		CLR_EP0_OUT_PKT_RDY();
 	    		switch(descSetup.bValueL&0xf)
		    	{
		    	case 0:
	    		    ep0State=EP0_STATE_GD_EP0_ONLY_0;
	    		    break;
		    	case 1:
					ep0State=EP0_STATE_GD_EP1_ONLY_0;
	    		    break;
	    		default:
//	    	    	DbgOut("[UE:GDE?]");
		    	    break;
		    	}
	    		break;
		    default:
//		    	DbgOut("[UE:GD?]");
	    		break;
		    }	
   		    break;
   		    
    	case SET_ADDRESS:
//			DbgOut("[SA:%d]",descSetup.bValueL);
            rFUNC_ADDR_REG=descSetup.bValueL | 0x80;
		    CLR_EP0_OUTPKTRDY_DATAEND(); //Because of no data control transfers.
            ep0State=EP0_STATE_INIT;
            break;    	
            
		case SET_CONFIGURATION:
//			DbgOut("[SC]");
            CLR_EP0_OUTPKTRDY_DATAEND(); //Because of no data control transfers.
            ep0State=EP0_STATE_INIT;
            isUsbdSetConfiguration=1; 
    	    break;
    	    
  		default:
//			DbgOut("[UE:SETUP=%x]",descSetup.bRequest);
    	    CLR_EP0_OUTPKTRDY_DATAEND(); //Because of no data control transfers.
		    ep0State=EP0_STATE_INIT;
	    	break;    	
        }
    }
    
    switch(ep0State)
    {	
	case EP0_STATE_INIT:
	    break; 

	//=== GET_DESCRIPTOR:DEVICE ===
   	case EP0_STATE_GD_DEV_0:
//		DbgOut("[GDD0]");
		WrPktEp0((U8 *)&descDev+0,8); //EP0_PKT_SIZE
		SET_EP0_IN_PKT_RDY();
		ep0State=EP0_STATE_GD_DEV_1;
		break;
            
	case EP0_STATE_GD_DEV_1:
//		DbgOut("[GDD1]");
		WrPktEp0((U8 *)&descDev+0x8,8); 
		SET_EP0_IN_PKT_RDY();            
		ep0State=EP0_STATE_GD_DEV_2;
		break;

	case EP0_STATE_GD_DEV_2:
//		DbgOut("[GDD2]");
		WrPktEp0((U8 *)&descDev+0x10,2);   //8+8+2=0x12
		SET_EP0_INPKTRDY_DATAEND();
		ep0State=EP0_STATE_INIT;
		break;   

        //=== GET_DESCRIPTOR:CONFIGURATION+INTERFACE+ENDPOINT0+ENDPOINT1 ===
        //Windows98 gets these 4 descriptors all together by issuing only a request.
        //Windows2000 gets each descriptor seperately.
	case EP0_STATE_GD_CFG_0:
//		DbgOut("[GDC0]");
		WrPktEp0((U8 *)&descConf+0,8); //EP0_PKT_SIZE
		SET_EP0_IN_PKT_RDY();
		ep0State=EP0_STATE_GD_CFG_1;
		break;
    
	case EP0_STATE_GD_CFG_1:
//		DbgOut("[GDC1]");
		WrPktEp0((U8 *)&descConf+8,1); 
		WrPktEp0((U8 *)&descIf+0,7); 
		SET_EP0_IN_PKT_RDY();
        ep0State=EP0_STATE_GD_CFG_2;
        break;

  	case EP0_STATE_GD_CFG_2:
//		DbgOut("[GDC2]");
        WrPktEp0((U8 *)&descIf+7,2); 
        WrPktEp0((U8 *)&descEndpt0+0,6); 
        SET_EP0_IN_PKT_RDY();
        ep0State=EP0_STATE_GD_CFG_3;
        break;

   	case EP0_STATE_GD_CFG_3:
//		DbgOut("[GDC3]");
        WrPktEp0((U8 *)&descEndpt0+6,1); 
        WrPktEp0((U8 *)&descEndpt1+0,7); 
        SET_EP0_IN_PKT_RDY();
        ep0State=EP0_STATE_GD_CFG_4;            
        break;

   	case EP0_STATE_GD_CFG_4:
//		DbgOut("[GDC4]");
		//zero length data packit 
		SET_EP0_INPKTRDY_DATAEND();
		ep0State=EP0_STATE_INIT;            
        break;

    //=== GET_DESCRIPTOR:CONFIGURATION ONLY===
   	case EP0_STATE_GD_CFG_ONLY_0:
//		DbgOut("[GDCO0]");
        WrPktEp0((U8 *)&descConf+0,8); //EP0_PKT_SIZE
        SET_EP0_IN_PKT_RDY();
        ep0State=EP0_STATE_GD_CFG_ONLY_1;
        break;
    
	case EP0_STATE_GD_CFG_ONLY_1:
//		DbgOut("[GDCO1]");
        WrPktEp0((U8 *)&descConf+8,1); 
        SET_EP0_INPKTRDY_DATAEND();
        ep0State=EP0_STATE_INIT;            
        break;

    //=== GET_DESCRIPTOR:INTERFACE ONLY===
   	case EP0_STATE_GD_IF_ONLY_0:
//		DbgOut("[GDI0]");
        WrPktEp0((U8 *)&descIf+0,8); 
        SET_EP0_IN_PKT_RDY();
        ep0State=EP0_STATE_GD_IF_ONLY_1;
        break;
        
   	case EP0_STATE_GD_IF_ONLY_1:
//		DbgOut("[GDI1]");
        WrPktEp0((U8 *)&descIf+8,1); 
        SET_EP0_INPKTRDY_DATAEND();
        ep0State=EP0_STATE_INIT;            
        break;

    //=== GET_DESCRIPTOR:ENDPOINT 0 ONLY===
   	case EP0_STATE_GD_EP0_ONLY_0:
//		DbgOut("[GDE00]");
        WrPktEp0((U8 *)&descEndpt0+0,7); 
        SET_EP0_INPKTRDY_DATAEND();
        ep0State=EP0_STATE_INIT;            
        break;
            
    //=== GET_DESCRIPTOR:ENDPOINT 1 ONLY===
   	case EP0_STATE_GD_EP1_ONLY_0:
//		DbgOut("[GDE10]");
        WrPktEp0((U8 *)&descEndpt1+0,7); 
        SET_EP0_INPKTRDY_DATAEND();
        ep0State=EP0_STATE_INIT;            
        break;
 
    //=== GET_DESCRIPTOR:STRING ===
   	case EP0_STATE_GD_STR_I0:
//		DbgOut("[GDS0_0]");
	    WrPktEp0((U8 *)descStr0, 4 );  
	    SET_EP0_INPKTRDY_DATAEND();
	    ep0State=EP0_STATE_INIT;     
	    ep0SubState=0;
	    break;

	case EP0_STATE_GD_STR_I1:
//		DbgOut("[GDS1_%d]",ep0SubState);
		if( (ep0SubState*EP0_PKT_SIZE+EP0_PKT_SIZE)<sizeof(descStr1) )
		{
			WrPktEp0((U8 *)descStr1+(ep0SubState*EP0_PKT_SIZE),EP0_PKT_SIZE); 
            SET_EP0_IN_PKT_RDY();
            ep0State=EP0_STATE_GD_STR_I1;
            ep0SubState++;
		}
	    else
	    {
	    	WrPktEp0((U8 *)descStr1+(ep0SubState*EP0_PKT_SIZE),
	    		 sizeof(descStr1)-(ep0SubState*EP0_PKT_SIZE)); 
			SET_EP0_INPKTRDY_DATAEND();
			ep0State=EP0_STATE_INIT;     
			ep0SubState=0;
	    }
	    break;

	case EP0_STATE_GD_STR_I2:
//		DbgOut("[GDS2_%d]",ep0SubState);
        if( (ep0SubState*EP0_PKT_SIZE+EP0_PKT_SIZE)<sizeof(descStr2) )
        {
        	WrPktEp0((U8 *)descStr2+(ep0SubState*EP0_PKT_SIZE),EP0_PKT_SIZE); 
            SET_EP0_IN_PKT_RDY();
            ep0State=EP0_STATE_GD_STR_I2;
            ep0SubState++;
		}
	    else
	    {
//			DbgOut("[E]");
	    	WrPktEp0((U8 *)descStr2+(ep0SubState*EP0_PKT_SIZE),
	    		 sizeof(descStr2)-(ep0SubState*EP0_PKT_SIZE)); 
			SET_EP0_INPKTRDY_DATAEND();
			ep0State=EP0_STATE_INIT;     
			ep0SubState=0;
	    }
		break;
		
	default:
//		DbgOut("UE:G?D");
    	break;
    }
}

U32 UsbFunction;

void InitDescriptorTable(U8 fun)
{	
	UsbFunction = fun-1;
    //Standard device descriptor
    descDev.bLength=0x12;	//EP0_DEV_DESC_SIZE=0x12 bytes    
    descDev.bDescriptorType=DEVICE_TYPE;         
    descDev.bcdUSBL=0x10;
    descDev.bcdUSBH=0x01; 	//Ver 1.10
    descDev.bDeviceClass=0xFF; //0x0          
    descDev.bDeviceSubClass=0x0;          
    descDev.bDeviceProtocol=0x0;          
    descDev.bMaxPacketSize0=0x8;         
    descDev.idVendorL=0x45;
    descDev.idVendorH=0x53;
    if(fun==1)    
    	descDev.idProductL=0x34;
    else
    	descDev.idProductL=0x33;	
    descDev.idProductH=0x12;
    descDev.bcdDeviceL=0x00;
    descDev.bcdDeviceH=0x01;
    descDev.iManufacturer=0x1;  //index of string descriptor
    descDev.iProduct=0x2;	//index of string descriptor 
    descDev.iSerialNumber=0x0;
    descDev.bNumConfigurations=0x1;

    //Standard configuration descriptor
    descConf.bLength=0x9;    
    descConf.bDescriptorType=CONFIGURATION_TYPE;         
    descConf.wTotalLengthL=0x20; //<cfg desc>+<if desc>+<endp0 desc>+<endp1 desc>
    descConf.wTotalLengthH=0;
    descConf.bNumInterfaces=1;
//dbg    descConf.bConfigurationValue=2;  //why 2? There's no reason.
    descConf.bConfigurationValue=1;  
    descConf.iConfiguration=0;
    descConf.bmAttributes=CONF_ATTR_DEFAULT;  //bus powered only.
    descConf.maxPower=25; //draws 50mA current from the USB bus.          

    //Standard interface descriptor
    descIf.bLength=0x9;    
    descIf.bDescriptorType=INTERFACE_TYPE;         
    descIf.bInterfaceNumber=0x0;
    descIf.bAlternateSetting=0x0; //?
    descIf.bNumEndpoints=2;	//# of endpoints except EP0
    descIf.bInterfaceClass=0xff; //0x0 ?
    descIf.bInterfaceSubClass=0x0;  
    descIf.bInterfaceProtocol=0x0;
    descIf.iInterface=0x0;

    //Standard endpoint0 descriptor
    descEndpt0.bLength=0x7;    
    descEndpt0.bDescriptorType=ENDPOINT_TYPE;         
    descEndpt0.bEndpointAddress=1|EP_ADDR_IN;   // 2400Xendpoint 1 is IN endpoint.
    descEndpt0.bmAttributes=EP_ATTR_BULK;
    descEndpt0.wMaxPacketSizeL=EP1_PKT_SIZE; //64
    descEndpt0.wMaxPacketSizeH=0x0;
    descEndpt0.bInterval=0x0; //not used

    //Standard endpoint1 descriptor
    descEndpt1.bLength=0x7;    
    descEndpt1.bDescriptorType=ENDPOINT_TYPE;         
    descEndpt1.bEndpointAddress=3|EP_ADDR_OUT;   // 2400X endpoint 3 is OUT endpoint.
    descEndpt1.bmAttributes=EP_ATTR_BULK;
    descEndpt1.wMaxPacketSizeL=EP3_PKT_SIZE; //64
    descEndpt1.wMaxPacketSizeH=0x0;
    descEndpt1.bInterval=0x0; //not used 
}