################### Start of $RCSfile: changer.conf.mtx,v $ #################### $Source: /home/alb/afbackup/afbackup-3.3.8.1/RCS/changer.conf.mtx,v $# $Id: changer.conf.mtx,v 1.2 2004/07/08 20:34:48 alb Exp alb $# $Date: 2004/07/08 20:34:48 $# $Author: alb $######### description ##################################################  Configuration file for media changer devices using the mtx command####################################################################### typical output of mtx status:## Data Transfer Element:  Full (Storage Element 1 Loaded)# Storage Element 1:      Empty# Storage Element 2:      Full   # Storage Element 3:      Full# Storage Element 4:      Full# Storage Element 5:      Full# Storage Element 6:      Full## typical output of mtx inquiry## Vendor ID: 'HP      ', Product ID: 'C1557A          ', Revision: 'U812'### Replacements in the commands:## pattern  replaced with## %d       streamer device filename# %D       changer device filename# %n       the origin number, if counting starts with 1# %m       the origin number, if counting starts with 0# %N       the target number, if conuting starts with 1# %M       the target number, if counting starts with 0## Commands to move cartridges# (moves, that are not supported, should be commented out)#Move Drive To Slot Command:	mtx -f %D unload %N %m >/dev/nullMove Slot To Drive Command:	mtx -f %D load %n %M >/dev/null#Move Drive To Loadport Command:	#Move Loadport To Drive Command:	#Move Slot To Loadport Command:	#Move Loadport To Slot Command:	#Move Drive To Drive Command:	#Move Slot To Slot Command:	mtx -f %D transfer %n %N#Move Loadport To Loadport Command:	## Commands to find free resources#ListEmpty Slots Command:	mtx -f %D status | grep '^[ 	]*Storage Element [0-9]*:.*Empty$' | awk '{print $3}' | sed 's/:.*$//g'#ListEmpty Loadports Command: