/*- * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 *	The Regents of the University of California.  All rights reserved. * * This code is derived from the Stanford/CMU enet packet filter, * (net/enet.c) distributed as part of 4.3BSD, and code contributed * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence  * Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software *    must display the following acknowledgement: *      This product includes software developed by the University of *      California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors *    may be used to endorse or promote products derived from this software *    without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *      @(#)bpf.h       7.1 (Berkeley) 5/7/91 * * @(#) $Header: /home/dragorn/src/CVS/kismet/kismet-devel/libpcap-0.7.2/bpf/net/bpf.h,v 1.1 2003/07/30 00:40:54 dragorn Exp $ (LBL) */#ifndef BPF_MAJOR_VERSION#ifdef __cplusplusextern "C" {#endif/* BSD style release date */#define BPF_RELEASE 199606typedef	int bpf_int32;typedef	u_int bpf_u_int32;/* * Alignment macros.  BPF_WORDALIGN rounds up to the next  * even multiple of BPF_ALIGNMENT.  */#ifndef __NetBSD__#define BPF_ALIGNMENT sizeof(bpf_int32)#else#define BPF_ALIGNMENT sizeof(long)#endif#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))#define BPF_MAXINSNS 512#define BPF_MAXBUFSIZE 0x8000#define BPF_MINBUFSIZE 32/* *  Structure for BIOCSETF. */struct bpf_program {	u_int bf_len;	struct bpf_insn *bf_insns;}; /* * Struct returned by BIOCGSTATS. */struct bpf_stat {	u_int bs_recv;		/* number of packets received */	u_int bs_drop;		/* number of packets dropped */};/* * Struct return by BIOCVERSION.  This represents the version number of  * the filter language described by the instruction encodings below. * bpf understands a program iff kernel_major == filter_major && * kernel_minor >= filter_minor, that is, if the value returned by the * running kernel has the same major number and a minor number equal * equal to or less than the filter being downloaded.  Otherwise, the * results are undefined, meaning an error may be returned or packets * may be accepted haphazardly. * It has nothing to do with the source code version. */struct bpf_version {	u_short bv_major;	u_short bv_minor;};/* Current version number of filter architecture. */#define BPF_MAJOR_VERSION 1#define BPF_MINOR_VERSION 1/* * BPF ioctls * * The first set is for compatibility with Sun's pcc style * header files.  If your using gcc, we assume that you * have run fixincludes so the latter set should work. */#if (defined(sun) || defined(ibm032)) && !defined(__GNUC__)#define	BIOCGBLEN	_IOR(B,102, u_int)#define	BIOCSBLEN	_IOWR(B,102, u_int)#define	BIOCSETF	_IOW(B,103, struct bpf_program)#define	BIOCFLUSH	_IO(B,104)#define BIOCPROMISC	_IO(B,105)#define	BIOCGDLT	_IOR(B,106, u_int)#define BIOCGETIF	_IOR(B,107, struct ifreq)#define BIOCSETIF	_IOW(B,108, struct ifreq)#define BIOCSRTIMEOUT	_IOW(B,109, struct timeval)#define BIOCGRTIMEOUT	_IOR(B,110, struct timeval)#define BIOCGSTATS	_IOR(B,111, struct bpf_stat)#define BIOCIMMEDIATE	_IOW(B,112, u_int)#define BIOCVERSION	_IOR(B,113, struct bpf_version)#define BIOCSTCPF	_IOW(B,114, struct bpf_program)#define BIOCSUDPF	_IOW(B,115, struct bpf_program)#else#define	BIOCGBLEN	_IOR('B',102, u_int)#define	BIOCSBLEN	_IOWR('B',102, u_int)#define	BIOCSETF	_IOW('B',103, struct bpf_program)#define	BIOCFLUSH	_IO('B',104)#define BIOCPROMISC	_IO('B',105)#define	BIOCGDLT	_IOR('B',106, u_int)#define BIOCGETIF	_IOR('B',107, struct ifreq)#define BIOCSETIF	_IOW('B',108, struct ifreq)#define BIOCSRTIMEOUT	_IOW('B',109, struct timeval)#define BIOCGRTIMEOUT	_IOR('B',110, struct timeval)#define BIOCGSTATS	_IOR('B',111, struct bpf_stat)#define BIOCIMMEDIATE	_IOW('B',112, u_int)#define BIOCVERSION	_IOR('B',113, struct bpf_version)#define BIOCSTCPF	_IOW('B',114, struct bpf_program)#define BIOCSUDPF	_IOW('B',115, struct bpf_program)#endif/* * Structure prepended to each packet. */struct bpf_hdr {	struct timeval	bh_tstamp;	/* time stamp */	bpf_u_int32	bh_caplen;	/* length of captured portion */	bpf_u_int32	bh_datalen;	/* original length of packet */	u_short		bh_hdrlen;	/* length of bpf header (this struct					   plus alignment padding) */};/* * Because the structure above is not a multiple of 4 bytes, some compilers * will insist on inserting padding; hence, sizeof(struct bpf_hdr) won't work. * Only the kernel needs to know about it; applications use bh_hdrlen. */#if defined(KERNEL) || defined(_KERNEL)#define SIZEOF_BPF_HDR 18#endif/* * Data-link level type codes. *//* * These are the types that are the same on all platforms; on other * platforms, a <net/bpf.h> should be supplied that defines the additional * DLT_* codes appropriately for that platform (the BSDs, for example, * should not just pick up this version of "bpf.h"; they should also define * the additional DLT_* codes used by their kernels, as well as the values * defined here - and, if the values they use for particular DLT_ types * differ from those here, they should use their values, not the ones * here). */#define DLT_NULL	0	/* no link-layer encapsulation */#define DLT_EN10MB	1	/* Ethernet (10Mb) */#define DLT_EN3MB	2	/* Experimental Ethernet (3Mb) */#define DLT_AX25	3	/* Amateur Radio AX.25 */#define DLT_PRONET	4	/* Proteon ProNET Token Ring */#define DLT_CHAOS	5	/* Chaos */#define DLT_IEEE802	6	/* IEEE 802 Networks */#define DLT_ARCNET	7	/* ARCNET */#define DLT_SLIP	8	/* Serial Line IP */#define DLT_PPP		9	/* Point-to-point Protocol */#define DLT_FDDI	10	/* FDDI *//* * These are values from the traditional libpcap "bpf.h". * Ports of this to particular platforms should replace these definitions * with the ones appropriate to that platform, if the values are * different on that platform. */#define DLT_ATM_RFC1483	11	/* LLC/SNAP encapsulated atm */#define DLT_RAW		12	/* raw IP *//* * These are values from BSD/OS's "bpf.h". * These are not the same as the values from the traditional libpcap * "bpf.h"; however, these values shouldn't be generated by any * OS other than BSD/OS, so the correct values to use here are the * BSD/OS values. * * Platforms that have already assigned these values to other * DLT_ codes, however, should give these codes the values * from that platform, so that programs that use these codes will * continue to compile - even though they won't correctly read * files of these types. */#ifdef __NetBSD__#ifndef DLT_SLIP_BSDOS#define DLT_SLIP_BSDOS	13	/* BSD/OS Serial Line IP */#define DLT_PPP_BSDOS	14	/* BSD/OS Point-to-point Protocol */#endif#else#define DLT_SLIP_BSDOS	15	/* BSD/OS Serial Line IP */#define DLT_PPP_BSDOS	16	/* BSD/OS Point-to-point Protocol */#endif#define DLT_ATM_CLIP	19	/* Linux Classical-IP over ATM *//* * These values are defined by NetBSD; other platforms should refrain from * using them for other purposes, so that NetBSD savefiles with link * types of 50 or 51 can be read as this type on all platforms. */#define DLT_PPP_SERIAL	50	/* PPP over serial with HDLC encapsulation */#define DLT_PPP_ETHER	51	/* PPP over Ethernet *//* * Values between 100 and 103 are used in capture file headers as * link-layer types corresponding to DLT_ types that differ * between platforms; don't use those values for new DLT_ new types. *//* * This value was defined by libpcap 0.5; platforms that have defined * it with a different value should define it here with that value - * a link type of 104 in a save file will be mapped to DLT_C_HDLC, * whatever value that happens to be, so programs will correctly * handle files with that link type regardless of the value of * DLT_C_HDLC. * * The name DLT_C_HDLC was used by BSD/OS; we use that name for source * compatibility with programs written for BSD/OS. * * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well, * for source compatibility with programs written for libpcap 0.5. */#define DLT_C_HDLC	104	/* Cisco HDLC */#define DLT_CHDLC	DLT_C_HDLC#define DLT_IEEE802_11	105	/* IEEE 802.11 wireless *//* * 106 is reserved for Linux Classical IP over ATM; it's like DLT_RAW, * except when it isn't.  (I.e., sometimes it's just raw IP, and * sometimes it isn't.)  We currently handle it as DLT_LINUX_SLL, * so that we don't have to worry about the link-layer header.) *//* * Reserved for Frame Relay; BSD/OS has a DLT_FR, with a value of 11, * but that collides with other values.  DLT_FR and DLT_FRELAY packets * start with the Frame Relay header (DLCI, etc.). */#define DLT_FRELAY	107/* * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except * that the AF_ type in the link-layer header is in network byte order. * * OpenBSD defines it as 12, but that collides with DLT_RAW, so we * define it as 108 here.  If OpenBSD picks up this file, it should * define DLT_LOOP as 12 in its version, as per the comment above - * and should not use 108 as a DLT_ value. */#define DLT_LOOP	108/* * Values between 109 and 112 are used in capture file headers as * link-layer types corresponding to DLT_ types that might differ * between platforms; don't use those values for new DLT_ types * other than the corresponding DLT_ types. *//* * This is for Linux cooked sockets. */#define DLT_LINUX_SLL	113/* * Apple LocalTalk hardware. */#define DLT_LTALK	114/* * Acorn Econet. */#define DLT_ECONET	115/* * Reserved for use with OpenBSD ipfilter. */#define DLT_IPFILTER	116/* * Reserved for use in capture-file headers as a link-layer type * corresponding to OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, * but that's DLT_LANE8023 in SuSE 6.3, so we can't use 17 for it * in capture-file headers. */#define DLT_PFLOG	117/* * Registered for Cisco-internal use. */#define DLT_CISCO_IOS	118/* * Reserved for 802.11 cards using the Prism II chips, with a link-layer * header including Prism monitor mode information plus an 802.11 * header. */#define DLT_PRISM_HEADER	119/* * Reserved for Aironet 802.11 cards, with an Aironet link-layer header * (see Doug Ambrisko's FreeBSD patches). */#define DLT_AIRONET_HEADER	120/* * Reserved for Siemens HiPath HDLC. */#define DLT_HHDLC		121/* * Reserved for RFC 2625 IP-over-Fibre Channel, as per a request from * Don Lee <donlee@cray.com>. * * This is not for use with raw Fibre Channel, where the link-layer * header starts with a Fibre Channel frame header; it's for IP-over-FC, * where the link-layer header starts with an RFC 2625 Network_Header * field. */#define DLT_IP_OVER_FC		122/* * Reserved for capturing on Solaris with SunATM. */#define DLT_SUNATM		123	/* Solaris+SunATM *//* * The instruction encodings. *//* instruction classes */#define BPF_CLASS(code) ((code) & 0x07)#define		BPF_LD		0x00#define		BPF_LDX		0x01#define		BPF_ST		0x02#define		BPF_STX		0x03#define		BPF_ALU		0x04#define		BPF_JMP		0x05#define		BPF_RET		0x06#define		BPF_MISC	0x07/* ld/ldx fields */#define BPF_SIZE(code)	((code) & 0x18)#define		BPF_W		0x00#define		BPF_H		0x08#define		BPF_B		0x10#define BPF_MODE(code)	((code) & 0xe0)#define		BPF_IMM 	0x00#define		BPF_ABS		0x20#define		BPF_IND		0x40#define		BPF_MEM		0x60#define		BPF_LEN		0x80#define		BPF_MSH		0xa0/* alu/jmp fields */#define BPF_OP(code)	((code) & 0xf0)#define		BPF_ADD		0x00#define		BPF_SUB		0x10#define		BPF_MUL		0x20#define		BPF_DIV		0x30#define		BPF_OR		0x40#define		BPF_AND		0x50#define		BPF_LSH		0x60#define		BPF_RSH		0x70#define		BPF_NEG		0x80#define		BPF_JA		0x00#define		BPF_JEQ		0x10#define		BPF_JGT		0x20#define		BPF_JGE		0x30#define		BPF_JSET	0x40#define BPF_SRC(code)	((code) & 0x08)#define		BPF_K		0x00#define		BPF_X		0x08/* ret - BPF_K and BPF_X also apply */#define BPF_RVAL(code)	((code) & 0x18)#define		BPF_A		0x10/* misc */#define BPF_MISCOP(code) ((code) & 0xf8)#define		BPF_TAX		0x00#define		BPF_TXA		0x80/* * The instruction data structure. */struct bpf_insn {	u_short	code;	u_char 	jt;	u_char 	jf;	bpf_int32 k;};/* * Macros for insn array initializers. */#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }#if defined(BSD) && (defined(KERNEL) || defined(_KERNEL))/* * Systems based on non-BSD kernels don't have ifnet's (or they don't mean * anything if it is in <net/if.h>) and won't work like this. */# if __STDC__extern void bpf_tap(struct ifnet *, u_char *, u_int);extern void bpf_mtap(struct ifnet *, struct mbuf *);extern void bpfattach(struct ifnet *, u_int, u_int);extern void bpfilterattach(int);# elseextern void bpf_tap();extern void bpf_mtap();extern void bpfattach();extern void bpfilterattach();# endif /* __STDC__ */#endif /* BSD && (_KERNEL || KERNEL) */#if __STDC__ || defined(__cplusplus)extern int bpf_validate(struct bpf_insn *, int);extern u_int bpf_filter(struct bpf_insn *, u_char *, u_int, u_int);#elseextern int bpf_validate();extern u_int bpf_filter();#endif/* * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST). */#define BPF_MEMWORDS 16#ifdef __cplusplus}#endif#endif