--
--  Copyright (C) 1988-2000 Altera Corporation
--  Any megafunction design, and related net list (encrypted or decrypted),
--  support information, device programming or simulation file, and any other
--  associated documentation or information provided by Altera or a partner
--  under Altera's Megafunction Partnership Program may be used only to
--  program PLD devices (but not masked PLD devices) from Altera.  Any other
--  use of such megafunction design, net list, support information, device
--  programming or simulation file, or any other related documentation or
--  information is prohibited for any other purpose, including, but not
--  limited to modification, reverse engineering, de-compiling, or use with
--  any other silicon devices, unless such use is explicitly licensed under
--  a separate agreement with Altera or a megafunction partner.  Title to
--  the intellectual property, including patents, copyrights, trademarks,
--  trade secrets, or maskworks, embodied in any such megafunction design,
--  net list, support information, device programming or simulation file, or
--  any other related documentation or information provided by Altera or a
--  megafunction partner, remains with Altera, the megafunction partner, or
--  their respective licensors.  No other licenses, including any licenses
--  needed under any third party's intellectual property, are provided herein.
--
CHIP c54
BEGIN
	|PCI_HRST0 :	INPUT_PIN = 78;
	|DSP_ICAK :	INPUT_PIN = 22;
	|DSP_CLKOUT :	INPUT_PIN = 19;
	|CODEC_MCLK :	INPUT_PIN = 100;
	|CODEC_FC :	OUTPUT_PIN = 99;
	|CODEC_RESET :	OUTPUT_PIN = 98;
	|DA_WR :	OUTPUT_PIN = 96;
	|DA_CS :	OUTPUT_PIN = 95;
	|ALL_RESET :	INPUT_PIN = 94;
	|AD_PD :	OUTPUT_PIN = 87;
	|AD_EOC :	INPUT_PIN = 86;
	|AD_RD :	OUTPUT_PIN = 85;
	|AD_CS :	OUTPUT_PIN = 83;
	|AD_CONVST :	OUTPUT_PIN = 82;
	|XBUS_ENA :	OUTPUT_PIN = 81;
	|FLASH_OE :	OUTPUT_PIN = 80;
	|FLASH_CE :	OUTPUT_PIN = 79;
	|DSP_A0 :	INPUT_PIN = 77;
	|FLASH_A16 :	OUTPUT_PIN = 74;
	|FLASH_BYTE :	OUTPUT_PIN = 73;
	|SRAM_WE :	OUTPUT_PIN = 72;
	|SRAM_A16 :	OUTPUT_PIN = 71;
	|SRAM_A15 :	OUTPUT_PIN = 70;
	|SRAM_A14 :	OUTPUT_PIN = 69;
	|FLASH_A15 :	OUTPUT_PIN = 67;
	|FLASH_A14 :	OUTPUT_PIN = 66;
	|FLASH_WE :	OUTPUT_PIN = 65;
	|FLASH_RESET :	OUTPUT_PIN = 63;
	|FLASH_RY/BY :	INPUT_PIN = 62;
	|FLASH_A18 :	OUTPUT_PIN = 60;
	|FLASH_A17 :	OUTPUT_PIN = 59;
	|DSP_A3 :	INPUT_PIN = 58;
	|DSP_A2 :	INPUT_PIN = 57;
	|DSP_A1 :	INPUT_PIN = 56;
	|SRAM_OE :	OUTPUT_PIN = 55;
	|SRAM_CE :	OUTPUT_PIN = 54;
	|PCI_HINT0 :	INPUT_PIN = 52;
	|DSP_A14 :	INPUT_PIN = 51;
	|DSP_A15 :	INPUT_PIN = 50;
	|DSP_READY :	OUTPUT_PIN = 49;
	|DSP_PS :	INPUT_PIN = 48;
	|DSP_DS :	INPUT_PIN = 47;
	|DSP_IS :	INPUT_PIN = 46;
	|DSP_R/W :	INPUT_PIN = 44;
	|DSP_MSTRB :	INPUT_PIN = 43;
	|DSP_IOSTRB :	INPUT_PIN = 42;
	|DSP_MSC :	INPUT_PIN = 39;
	|DSP_XF :	INPUT_PIN = 38;
	|DSP_IAQ :	INPUT_PIN = 37;
	|DSP_BIO :	OUTPUT_PIN = 35;
	|DSP_MP/MC :	OUTPUT_PIN = 34;
	|DSP_D6 :	INPUT_PIN = 33;
	|DSP_D7 :	INPUT_PIN = 32;
	|DSP_A18 :	INPUT_PIN = 31;
	|DSP_A17 :	INPUT_PIN = 30;
	|DSP_A16 :	INPUT_PIN = 29;
	|DSP_D5 :	INPUT_PIN = 27;
	|DSP_D4 :	INPUT_PIN = 26;
	|DSP_D3 :	INPUT_PIN = 25;
	|DSP_D2 :	INPUT_PIN = 24;
	|DSP_D1 :	INPUT_PIN = 23;
	|DSP_D0 :	INPUT_PIN = 21;
	|DSP_TOUT0 :	INPUT_PIN = 18;
	|DSP_INT3 :	OUTPUT_PIN = 16;
	|DSP_INT2 :	OUTPUT_PIN = 15;
	|DSP_INT1 :	OUTPUT_PIN = 14;
	|DSP_INT0 :	OUTPUT_PIN = 12;
	|DSP_NMI :	OUTPUT_PIN = 11;
	|DSP_RS :	OUTPUT_PIN = 10;
	|IO4 :	OUTPUT_PIN = 9;
	|IO3 :	OUTPUT_PIN = 8;
	|IO2 :	OUTPUT_PIN = 7;
	|IO1 :	OUTPUT_PIN = 4;
	|LED3 :	OUTPUT_PIN = 3;
	|LED2 :	OUTPUT_PIN = 2;
	|LED1 :	OUTPUT_PIN = 1;
	MIGRATION_DEVICE = EPM7128SQC100;
	DEVICE = EPM7128SQC100-10;
END;

DEFAULT_DEVICES
BEGIN
	AUTO_DEVICE = EPM7256SQC208-7;
	AUTO_DEVICE = EPM7256SRC208-7;
	AUTO_DEVICE = EPM7192SQC160-7;
	AUTO_DEVICE = EPM7160SQC160-6;
	AUTO_DEVICE = EPM7160STC100-6;
	AUTO_DEVICE = EPM7160SLC84-6;
	AUTO_DEVICE = EPM7128SQC160-6;
	AUTO_DEVICE = EPM7128STC100-6;
	AUTO_DEVICE = EPM7128SQC100-6;
	AUTO_DEVICE = EPM7128SLC84-6;
	AUTO_DEVICE = EPM7064STC100-5;
	AUTO_DEVICE = EPM7064SLC84-5;
	AUTO_DEVICE = EPM7064STC44-5;
	AUTO_DEVICE = EPM7064SLC44-5;
	AUTO_DEVICE = EPM7032STC44-5;
	AUTO_DEVICE = EPM7032SLC44-5;
	ASK_BEFORE_ADDING_EXTRA_DEVICES = ON;
END;

TIMING_POINT
BEGIN
	DEVICE_FOR_TIMING_SYNTHESIS = EPM7128SQC100-10;
	MAINTAIN_STABLE_SYNTHESIS = OFF;
	CUT_ALL_CLEAR_PRESET = ON;
	CUT_ALL_BIDIR = ON;
END;

IGNORED_ASSIGNMENTS
BEGIN
	FIT_IGNORE_TIMING = ON;
	DEMOTE_SPECIFIC_LCELL_ASSIGNMENTS_TO_LAB_ASSIGNMENTS = OFF;
	IGNORE_LOCAL_ROUTING_ASSIGNMENTS = OFF;
	IGNORE_DEVICE_ASSIGNMENTS = OFF;
	IGNORE_LC_ASSIGNMENTS = OFF;
	IGNORE_PIN_ASSIGNMENTS = OFF;
	IGNORE_CHIP_ASSIGNMENTS = OFF;
	IGNORE_TIMING_ASSIGNMENTS = OFF;
	IGNORE_LOGIC_OPTION_ASSIGNMENTS = OFF;
	IGNORE_CLIQUE_ASSIGNMENTS = OFF;
END;

GLOBAL_PROJECT_DEVICE_OPTIONS
BEGIN
	MULTIVOLT_IO = ON;
	MAX7000B_ENABLE_VREFB = OFF;
	MAX7000B_ENABLE_VREFA = OFF;
	MAX7000B_VCCIO_IOBANK2 = 3.3V;
	MAX7000B_VCCIO_IOBANK1 = 3.3V;
	CONFIG_EPROM_PULLUP_RESISTOR = ON;
	CONFIG_EPROM_USER_CODE = FFFFFFFF;
	FLEX_CONFIGURATION_EPROM = AUTO;
	MAX7000AE_ENABLE_JTAG = ON;
	MAX7000AE_USER_CODE = FFFFFFFF;
	FLEX6000_USE_LOW_VOLTAGE_CONFIGURATION_EPROM = OFF;
	FLEX10KA_USE_LOW_VOLTAGE_CONFIGURATION_EPROM = ON;
	FLEX10K_USE_LOW_VOLTAGE_CONFIGURATION_EPROM = OFF;
	FLEX6000_ENABLE_JTAG = OFF;
	CONFIG_SCHEME_FLEX_6000 = PASSIVE_SERIAL;
	MAX7000S_ENABLE_JTAG = ON;
	FLEX10K_ENABLE_LOCK_OUTPUT = OFF;
	MAX7000S_USER_CODE = FFFF;
	CONFIG_SCHEME_10K = PASSIVE_SERIAL;
	FLEX10K_JTAG_USER_CODE = 7F;
	ENABLE_INIT_DONE_OUTPUT = OFF;
	ENABLE_CHIP_WIDE_OE = OFF;
	ENABLE_CHIP_WIDE_RESET = OFF;
	nCEO = UNRESERVED;
	CLKUSR = UNRESERVED;
	ADD17 = UNRESERVED;
	ADD16 = UNRESERVED;
	ADD15 = UNRESERVED;
	ADD14 = UNRESERVED;
	ADD13 = UNRESERVED;
	ADD0_TO_ADD12 = UNRESERVED;
	SDOUT = RESERVED_DRIVES_OUT;
	RDCLK = UNRESERVED;
	RDYnBUSY = UNRESERVED;
	nWS_nRS_nCS_CS = UNRESERVED;
	DATA1_TO_DATA7 = UNRESERVED;
	DATA0 = RESERVED_TRI_STATED;
	FLEX8000_ENABLE_JTAG = OFF;
	CONFIG_SCHEME = ACTIVE_SERIAL;
	DISABLE_TIME_OUT = OFF;
	ENABLE_DCLK_OUTPUT = OFF;
	RELEASE_CLEARS = OFF;
	AUTO_RESTART = OFF;
	USER_CLOCK = OFF;
	SECURITY_BIT = OFF;
	RESERVED_PINS_PERCENT = 0;
	RESERVED_LCELLS_PERCENT = 0;
END;

GLOBAL_PROJECT_SYNTHESIS_ASSIGNMENT_OPTIONS
BEGIN
	DEVICE_FAMILY = MAX7000S;
	MULTI_LEVEL_SYNTHESIS_MAX9000 = ON;
	AUTO_IMPLEMENT_IN_EAB = OFF;
	AUTO_OPEN_DRAIN_PINS = ON;
	ONE_HOT_STATE_MACHINE_ENCODING = OFF;
	AUTO_REGISTER_PACKING = OFF;
	STYLE = NORMAL;
	AUTO_FAST_IO = OFF;
	AUTO_GLOBAL_OE = ON;
	AUTO_GLOBAL_PRESET = ON;
	AUTO_GLOBAL_CLEAR = ON;
	AUTO_GLOBAL_CLOCK = ON;
	MULTI_LEVEL_SYNTHESIS_MAX5000_7000 = OFF;
	OPTIMIZE_FOR_SPEED = 5;
END;

COMPILER_PROCESSING_CONFIGURATION
BEGIN
	USE_QUARTUS_FITTER = ON;
	DESIGN_DOCTOR = ON;
	PRESERVE_ALL_NODE_NAME_SYNONYMS = ON;
	FITTER_SETTINGS = NORMAL;
	SMART_RECOMPILE = OFF;
	GENERATE_AHDL_TDO_FILE = OFF;
	RPT_FILE_USER_ASSIGNMENTS = ON;
	RPT_FILE_LCELL_INTERCONNECT = ON;
	RPT_FILE_HIERARCHY = ON;
	RPT_FILE_EQUATIONS = ON;
	LINKED_SNF_EXTRACTOR = OFF;
	OPTIMIZE_TIMING_SNF = OFF;
	TIMING_SNF_EXTRACTOR = ON;
	FUNCTIONAL_SNF_EXTRACTOR = OFF;
	DESIGN_DOCTOR_RULES = EPLD;
END;

COMPILER_INTERFACES_CONFIGURATION
BEGIN
	EDIF_INPUT_LMF2 = "c:\max2work\cpld1\*.lmf";
	EDIF_INPUT_LMF1 = "c:\max2work\cpld1\*.lmf";
	NETLIST_OUTPUT_TIME_SCALE = 0.1ns;
	EDIF_INPUT_SHOW_LMF_MAPPING_MESSAGES = OFF;
	EDIF_BUS_DELIMITERS = [];
	EDIF_FLATTEN_BUS = OFF;
	EDIF_OUTPUT_FORCE_0NS_DELAYS = OFF;
	EDIF_OUTPUT_INCLUDE_SPECIAL_PRIM = OFF;
	EDIF_OUTPUT_MAP_ILLEGAL_CHAR = OFF;
	EDIF_OUTPUT_DELAY_CONSTRUCTS = EDO_FILE;
	EDIF_OUTPUT_USE_EDC = OFF;
	EDIF_INPUT_USE_LMF2 = OFF;
	EDIF_INPUT_USE_LMF1 = OFF;
	EDIF_OUTPUT_GND = GND;
	EDIF_OUTPUT_VCC = VCC;
	EDIF_INPUT_GND = GND;
	EDIF_INPUT_VCC = VCC;
	EDIF_OUTPUT_EDC_FILE = *.edc;
	VHDL_GENERATE_CONFIGURATION_DECLARATION = OFF;
	VHDL_OUTPUT_DELAY_CONSTRUCTS = VHO_FILE;
	VERILOG_OUTPUT_DELAY_CONSTRUCTS = VO_FILE;
	VHDL_FLATTEN_BUS = OFF;
	VERILOG_FLATTEN_BUS = OFF;
	EDIF_TRUNCATE_HIERARCHY_PATH = OFF;
	VHDL_TRUNCATE_HIERARCHY_PATH = OFF;
	VERILOG_TRUNCATE_HIERARCHY_PATH = OFF;
	VERILOG_OUTPUT_MAP_ILLEGAL_CHAR = OFF;
	VHDL_WRITER_VERSION = VHDL93;
	VHDL_READER_VERSION = VHDL93;
	SYNOPSYS_MAPPING_EFFORT = MEDIUM;
	SYNOPSYS_BOUNDARY_OPTIMIZATION = OFF;
	SYNOPSYS_HIERARCHICAL_COMPILATION = ON;
	SYNOPSYS_DESIGNWARE = OFF;
	SYNOPSYS_COMPILER = DESIGN;
	USE_SYNOPSYS_SYNTHESIS = OFF;
	VHDL_NETLIST_WRITER = OFF;
	VERILOG_NETLIST_WRITER = OFF;
	XNF_GENERATE_AHDL_TDX_FILE = ON;
	XNF_TRANSLATE_INTERNAL_NODE_NAMES = ON;
	XNF_EMULATE_TRI_STATE_BUSES = INTERNAL_LOGIC;
	EDIF_OUTPUT_VERSION = 200;
	EDIF_NETLIST_WRITER = OFF;
END;

CUSTOM_DESIGN_DOCTOR_RULES
BEGIN
	MASTER_RESET = OFF;
	EXPANDER_NETWORKS = ON;
	RACE_CONDITIONS = ON;
	DELAY_CHAINS = ON;
	ASYNCHRONOUS_INPUTS = ON;
	PRESET_CLEAR_NETWORKS = ON;
	STATIC_HAZARDS_AFTER_SYNTHESIS = OFF;
	STATIC_HAZARDS_BEFORE_SYNTHESIS = ON;
	MULTI_CLOCK_NETWORKS = ON;
	MULTI_LEVEL_CLOCKS = ON;
	GATED_CLOCKS = ON;
	RIPPLE_CLOCKS = ON;
END;

SIMULATOR_CONFIGURATION
BEGIN
	BIDIR_PIN = STRONG;
	END_TIME = 0.0ns;
	START_TIME = 0.0ns;
	GLITCH_TIME = 0.0ns;
	GLITCH = OFF;
	OSCILLATION_TIME = 0.0ns;
	OSCILLATION = OFF;
	CHECK_OUTPUTS = OFF;
	SETUP_HOLD = OFF;
	USE_DEVICE = OFF;
END;

TIMING_ANALYZER_CONFIGURATION
BEGIN
	CUT_OFF_RAM_REGISTERED_WE_PATHS = OFF;
	LIST_PATH_FREQUENCY = 10MHz;
	LIST_PATH_COUNT = 10;
	REGISTERED_PERFORMANCE_OPTIONS = NUMBER_OF_PATHS;
	INCLUDE_PATHS_LESS_THAN_VALUE = 214.7483647ms;
	INCLUDE_PATHS_LESS_THAN = OFF;
	INCLUDE_PATHS_GREATER_THAN_VALUE = 0.0ns;
	INCLUDE_PATHS_GREATER_THAN = OFF;
	DELAY_MATRIX_OPTIONS = SHOW_ALL_PATHS;
	CELL_WIDTH = 18;
	LIST_ONLY_LONGEST_PATH = ON;
	CUT_OFF_CLEAR_AND_PRESET_PATHS = ON;
	CUT_OFF_IO_PIN_FEEDBACK = ON;
	AUTO_RECALCULATE = OFF;
	ANALYSIS_MODE = DELAY_MATRIX;
END;