<!--
This XML file (created on Wed Jan 04 09:38:50 2006) contains limited information
from the compilation of logic designs using Quartus II software (BUT NOT THE
LOGIC DESIGN FILES) that will be transmitted to Altera Corporation through
operation of the "TalkBack" feature.  To enable/disable this feature, run
qtb_install.exe located in your quartus/bin folder.  For more information, go
to www.altera.com/products/software/download/dnl-download_license.html
-->
<talkback>
<ver>4.2</ver>
<schema>quartus_version_4.2_build_156.xsd</schema><license>
	<host_id>000d567730b7</host_id>
	<nic_id>000d567730b7</nic_id>
	<cdrive_id>741bc671</cdrive_id>
</license>
<tool>
	<name>Quartus II</name>
	<version>4.2</version>
	<build>Build 156</build>
	<module>quartus_asm.exe</module>
	<edition>Web Edition</edition>
	<compilation_end_time>Wed Jan 04 09:38:51 2006</compilation_end_time>
</tool>
<machine>
	<os>Windows 2000</os>
	<cpu>
		<proc_count>1</proc_count>
		<cpu_freq units="MHz">2404</cpu_freq>
	</cpu>
	<ram units="MB">239</ram>
</machine>
<top_file>D:/PLD-Test/NEW/Q7230/Q7230</top_file>
<mep_data>
	<command_line>quartus_asm --import_settings_files=off --export_settings_files=off Q7230 -c Q7230</command_line>
</mep_data>
<software_data>
	<speed_disk_usage_tradeoff>normal</speed_disk_usage_tradeoff>
</software_data>
<assembler_settings>
	<row>
		<option>Use smart compilation</option>
		<setting>Normal</setting>
		<default_value>Normal</default_value>
	</row>
	<row>
		<option>Generate Serial Vector Format File (.svf) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate In System Configuration File (.isc) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a JEDEC STAPL Format File (.jam) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate an uncompressed Jam STAPL Byte Code 2.0 File (.jbc) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a compressed Jam STAPL Byte Code 2.0 File (.jbc) for Target Device</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Generate Serial Vector Format File (.svf) For Configuration Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate In System Configuration File (.isc) For Configuration Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a JEDEC STAPL Format File (.jam)For Configuration Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate an uncompressed Jam STAPL Byte Code 2.0 File (.jbc) For Configuration Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a compressed Jam STAPL Byte Code 2.0 File (.jbc) For Configuration Device</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Generate Hexadecimal (Intel-format) Output File (.hexout) For Configuration Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Compression mode</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Clock source for configuration device</option>
		<setting>Internal</setting>
		<default_value>Internal</default_value>
	</row>
	<row>
		<option>Clock frequency of the configuration device</option>
		<setting units="MHz">10</setting>
		<default_value units="MHz">10</default_value>
	</row>
	<row>
		<option>Divide clock frequency by</option>
		<setting>1</setting>
		<default_value>1</default_value>
	</row>
	<row>
		<option>JTAG user code for target device</option>
		<setting>Ffffffff</setting>
		<default_value>Ffffffff</default_value>
	</row>
	<row>
		<option>Auto user code</option>
		<setting>off</setting>
		<default_value>off</default_value>
	</row>
	<row>
		<option>Security bit</option>
		<setting>off</setting>
		<default_value>off</default_value>
	</row>
	<row>
		<option>Configuration device auto user code</option>
		<setting>off</setting>
		<default_value>off</default_value>
	</row>
	<row>
		<option>Generate Tabular Text File (.ttf) For Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Raw Binary File (.rbf) For Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Hexadecimal (Intel-Format) Output File (.hexout) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Hexadecimal Output File start address</option>
		<setting>0</setting>
		<default_value>0</default_value>
	</row>
	<row>
		<option>Hexadecimal Output File count direction</option>
		<setting>Up</setting>
		<default_value>Up</default_value>
	</row>
</assembler_settings>
</talkback>