To install:0) if you are uncommon with configuration and installation of GNU/autoconf'd   software please read to generic install text at the end of this file.1) configure the package, possibly with		CFLAGS=-O2 ./configure   Use the following options if you need to:   --disble-timesync     this saves a few bytes. The timesync protocol allows to set the     receivers system time to the sender's time (see option S in     the manual pages). Including timesync support doesn't introduce     any incompatabilites (but *using* timesync does).   --enable-pubdir=/var/spool/uucppublic     if you want support for a public writeable directory.   --enable-syslog[=[[FACILITY,]level]]     to include syslog support. Not much will be written to syslog,     just one line per file.     Default facility is LOG_UUCP, but you can change that to whatever     your syslog.h supports.     Level defaults to "default", meaning syslog is on by default,     but is can be forced ("force"), meaning users will not be     allowed to turn it off, and it can be "optional", meaning users     have to turn it on for every transmission.     Example:     	--enable-syslog=LOG_LOCAL0,force     	  every filetransfer will be logged to LOG_LOCAL0.     	--enable-syslog=default and --enable-syslog     	  every filetransfer will be logged to LOG_UUCP, unless     	  the user turns this off with the "--syslog=off" runtime     	  option of lsz and lrz.     	--enable-syslog=optional     	  no filetransfer will be logged, but syslogging can be     	  enabled with the "--syslog" runtime option of lsz and lrz.   --disable-mkdir     if rz shall never create directories (this option is only included     because disbaling the directory creation was possible with the     original sources).   --prefix=/usr/local     to install the programs and documentation under /usr/local instead     of /usr (default).   --program-transform-name=s/l//     to install the programs and manual pages under the traditional     names (sz, sz.1 instead of lsz, lsz.1).2) make   (please contact uwe@ohse.de if there are any problems. Sorry,   for the moment i only have access to linux machines)3) make check   will perform a selftest, sending some files in the distribution    through a nimed pipe.   ("make vcheck" will do the same as "make check" does, but prints   a progres report)4) please read COMPATABILITY5) make install   if everything is ok.-------------------- generic GNU INSTALL text -----------------------------Basic Installation==================   These are generic installation instructions.   The `configure' shell script attempts to guess correct values forvarious system-dependent variables used during compilation.  It usesthose values to create a `Makefile' in each directory of the package.It may also create one or more `.h' files containing system-dependentdefinitions.  Finally, it creates a shell script `config.status' thatyou can run in the future to recreate the current configuration, a file`config.cache' that saves the results of its tests to speed upreconfiguring, and a file `config.log' containing compiler output(useful mainly for debugging `configure').   If you need to do unusual things to compile the package, please tryto figure out how `configure' could check whether to do them, and maildiffs or instructions to the address given in the `README' so they canbe considered for the next release.  If at some point `config.cache'contains results you don't want to keep, you may remove or edit it.   The file `configure.in' is used to create `configure' by a programcalled `autoconf'.  You only need `configure.in' if you want to changeit or regenerate `configure' using a newer version of `autoconf'.The simplest way to compile this package is:  1. `cd' to the directory containing the package's source code and type     `./configure' to configure the package for your system.  If you're     using `csh' on an old version of System V, you might need to type     `sh ./configure' instead to prevent `csh' from trying to execute     `configure' itself.     Running `configure' takes awhile.  While running, it prints some     messages telling which features it is checking for.  2. Type `make' to compile the package.  3. Optionally, type `make check' to run any self-tests that come with     the package.  4. Type `make install' to install the programs and any data files and     documentation.  5. You can remove the program binaries and object files from the     source code directory by typing `make clean'.  To also remove the     files that `configure' created (so you can compile the package for     a different kind of computer), type `make distclean'.  There is     also a `make maintainer-clean' target, but that is intended mainly     for the package's developers.  If you use it, you may have to get     all sorts of other programs in order to regenerate files that came     with the distribution.Compilers and Options=====================   Some systems require unusual options for compilation or linking thatthe `configure' script does not know about.  You can give `configure'initial values for variables by setting them in the environment.  Usinga Bourne-compatible shell, you can do that on the command line likethis:     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configureOr on systems that have the `env' program, you can do it like this:     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configureCompiling For Multiple Architectures====================================   You can compile the package for more than one kind of computer at thesame time, by placing the object files for each architecture in theirown directory.  To do this, you must use a version of `make' thatsupports the `VPATH' variable, such as GNU `make'.  `cd' to thedirectory where you want the object files and executables to go and runthe `configure' script.  `configure' automatically checks for thesource code in the directory that `configure' is in and in `..'.   If you have to use a `make' that does not supports the `VPATH'variable, you have to compile the package for one architecture at a timein the source code directory.  After you have installed the package forone architecture, use `make distclean' before reconfiguring for anotherarchitecture.Installation Names==================   By default, `make install' will install the package's files in`/usr/local/bin', `/usr/local/man', etc.  You can specify aninstallation prefix other than `/usr/local' by giving `configure' theoption `--prefix=PATH'.   You can specify separate installation prefixes forarchitecture-specific files and architecture-independent files.  If yougive `configure' the option `--exec-prefix=PATH', the package will usePATH as the prefix for installing programs and libraries.Documentation and other data files will still use the regular prefix.   In addition, if you use an unusual directory layout you can giveoptions like `--bindir=PATH' to specify different values for particularkinds of files.  Run `configure --help' for a list of the directoriesyou can set and what kinds of files go in them.   If the package supports it, you can cause programs to be installedwith an extra prefix or suffix on their names by giving `configure' theoption `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.Optional Features=================   Some packages pay attention to `--enable-FEATURE' options to`configure', where FEATURE indicates an optional part of the package.They may also pay attention to `--with-PACKAGE' options, where PACKAGEis something like `gnu-as' or `x' (for the X Window System).  The`README' should mention any `--enable-' and `--with-' options that thepackage recognizes.   For packages that use the X Window System, `configure' can usuallyfind the X include and library files automatically, but if it doesn't,you can use the `configure' options `--x-includes=DIR' and`--x-libraries=DIR' to specify their locations.Specifying the System Type==========================   There may be some features `configure' can not figure outautomatically, but needs to determine by the type of host the packagewill run on.  Usually `configure' can figure that out, but if it printsa message saying it can not guess the host type, give it the`--host=TYPE' option.  TYPE can either be a short name for the systemtype, such as `sun4', or a canonical name with three fields:     CPU-COMPANY-SYSTEMSee the file `config.sub' for the possible values of each field.  If`config.sub' isn't included in this package, then this package doesn'tneed to know the host type.   If you are building compiler tools for cross-compiling, you can alsouse the `--target=TYPE' option to select the type of system they willproduce code for and the `--build=TYPE' option to select the type ofsystem on which you are compiling the package.Sharing Defaults================   If you want to set default values for `configure' scripts to share,you can create a site shell script called `config.site' that givesdefault values for variables like `CC', `cache_file', and `prefix'.`configure' looks for `PREFIX/share/config.site' if it exists, then`PREFIX/etc/config.site' if it exists.  Or, you can set the`CONFIG_SITE' environment variable to the location of the site script.A warning: not all `configure' scripts look for a site script.Operation Controls==================   `configure' recognizes the following options to control how itoperates.`--cache-file=FILE'     Use and save the results of the tests in FILE instead of     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for     debugging `configure'.`--help'     Print a summary of the options to `configure', and exit.`--quiet'`--silent'`-q'     Do not print messages saying which checks are being made.`--srcdir=DIR'     Look for the package's source code in directory DIR.  Usually     `configure' can determine that directory automatically.`--version'     Print the version of Autoconf used to generate the `configure'     script, and exit.`configure' also accepts some other, not widely useful, options.