# aclocal.m4 generated automatically by aclocal 1.5

# Copyright 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# Local macros for the SDL configure.in script

dnl Function to link an architecture specific file
dnl LINK_ARCH_SRC(source_dir, arch, source_file)
AC_DEFUN(COPY_ARCH_SRC,
[
  echo "Copying $1/$2/$3 -> $1/$3"
  old="$srcdir/$1/$2/$3"
  new="$srcdir/$1/$3"
  cat >$new <<__EOF__
/* WARNING:  This file was automatically generated!
 * Original: $old
 */
__EOF__
  cat >>$new <$old
])

#
# --- esd.m4 ---
#
# Configure paths for ESD
# Manish Singh    98-9-30
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor

dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS
dnl
AC_DEFUN(AM_PATH_ESD,
[dnl 
dnl Get the cflags and libraries from the esd-config script
dnl
AC_ARG_WITH(esd-prefix,[  --with-esd-prefix=PFX   Prefix where ESD is installed (optional)],
            esd_prefix="$withval", esd_prefix="")
AC_ARG_WITH(esd-exec-prefix,[  --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)],
            esd_exec_prefix="$withval", esd_exec_prefix="")
AC_ARG_ENABLE(esdtest, [  --disable-esdtest       Do not try to compile and run a test ESD program],
		    , enable_esdtest=yes)

  if test x$esd_exec_prefix != x ; then
     esd_args="$esd_args --exec-prefix=$esd_exec_prefix"
     if test x${ESD_CONFIG+set} != xset ; then
        ESD_CONFIG=$esd_exec_prefix/bin/esd-config
     fi
  fi
  if test x$esd_prefix != x ; then
     esd_args="$esd_args --prefix=$esd_prefix"
     if test x${ESD_CONFIG+set} != xset ; then
        ESD_CONFIG=$esd_prefix/bin/esd-config
     fi
  fi

  AC_PATH_PROG(ESD_CONFIG, esd-config, no)
  min_esd_version=ifelse([$1], ,0.2.7,$1)
  AC_MSG_CHECKING(for ESD - version >= $min_esd_version)
  no_esd=""
  if test "$ESD_CONFIG" = "no" ; then
    no_esd=yes
  else
    ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags`
    ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs`

    esd_major_version=`$ESD_CONFIG $esd_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    esd_minor_version=`$ESD_CONFIG $esd_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_esdtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $ESD_CFLAGS"
      LIBS="$LIBS $ESD_LIBS"
dnl
dnl Now check if the installed ESD is sufficiently new. (Also sanity
dnl checks the results of esd-config to some extent
dnl
      rm -f conf.esdtest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <esd.h>

char*
my_strdup (char *str)
{
  char *new_str;
  
  if (str)
    {
      new_str = malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;
  
  return new_str;
}

int main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.esdtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_esd_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_esd_version");
     exit(1);
   }

   if (($esd_major_version > major) ||
      (($esd_major_version == major) && ($esd_minor_version > minor)) ||
      (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version);
      printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n");
      printf("*** to point to the correct copy of esd-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}

],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_esd" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$ESD_CONFIG" = "no" ; then
       echo "*** The esd-config script installed by ESD could not be found"
       echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the ESD_CONFIG environment variable to the"
       echo "*** full path to esd-config."
     else
       if test -f conf.esdtest ; then
        :
       else
          echo "*** Could not run ESD test program, checking why..."
          CFLAGS="$CFLAGS $ESD_CFLAGS"
          LIBS="$LIBS $ESD_LIBS"
          AC_TRY_LINK([
#include <stdio.h>
#include <esd.h>
],      [ return 0; ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding ESD or finding the wrong"
          echo "*** version of ESD. If it is not finding ESD, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means ESD was incorrectly installed"
          echo "*** or that you have moved ESD since it was installed. In the latter case, you"
          echo "*** may want to edit the esd-config script: $ESD_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     ESD_CFLAGS=""
     ESD_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(ESD_CFLAGS)
  AC_SUBST(ESD_LIBS)
  rm -f conf.esdtest
])


# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl

# Save cache, so that ltconfig can load it
AC_CACHE_SAVE

# Actually configure libtool.  ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])

# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD

# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])

AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl

case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac

# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case "`/usr/bin/file conftest.o`" in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;

ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
  AC_CHECK_TOOL(AS, as, false)
  AC_CHECK_TOOL(OBJDUMP, objdump, false)
  ;;
])
esac
])

# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])

# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])

# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])

# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])

# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.