?? gen_probe.c
字號:
/* * Routines common to all CFI-type probes. * (C) 2001, 2001 Red Hat, Inc. * GPL'd * $Id: gen_probe.c,v 1.1.1.1 2002/07/19 08:02:35 nandy Exp $ */#include "mtd/mtd.h"#include "mtd/map.h"#include "mtd/cfi.h"#include "mtd/gen_probe.h"#include "printk.h"#include "heap.h"static struct mtd_info *check_cmd_set(struct map_info *, int);static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chip_probe *cp);static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp, struct cfi_private *cfi);struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp){ struct mtd_info *mtd = NULL; struct cfi_private *cfi; /* First probe the map to see if we have CFI stuff there. */ cfi = genprobe_ident_chips(map, cp); if (!cfi) return NULL; map->fldrv_priv = cfi; /* OK we liked it. Now find a driver for the command set it talks */ mtd = check_cmd_set(map, 1); /* First the primary cmdset */ if (!mtd) mtd = check_cmd_set(map, 0); /* Then the secondary */ if (mtd) return mtd; printk("gen_probe: No supported Vendor Command Set found\n"); mfree(cfi->cfiq); mfree(cfi); map->fldrv_priv = NULL; return NULL;}struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chip_probe *cp){ unsigned long base=0; struct cfi_private cfi; struct cfi_private *retcfi; struct flchip chip[MAX_CFI_CHIPS]; memset(&cfi, 0, sizeof(cfi)); /* Call the probetype-specific code with all permutations of interleave and device type, etc. */ if (!genprobe_new_chip(map, cp, &cfi)) { /* The probe didn't like it */ printk("%s: Found no %s device at location zero\n", cp->name, map->name); return NULL; } chip[0].start = 0; chip[0].state = FL_READY; cfi.chipshift = cfi.cfiq->DevSize; switch(cfi.interleave) {#ifdef CFIDEV_INTERLEAVE_1 case 1: break;#endif#ifdef CFIDEV_INTERLEAVE_2 case 2: cfi.chipshift++; break;#endif#ifdef CFIDEV_INTERLEAVE_4 case 4: cfi.chipshift+=2; break;#endif default: } cfi.numchips = 1; /* * Now probe for other chips, checking sensibly for aliases while * we're at it. The new_chip probe above should have let the first * chip in read mode. * * NOTE: Here, we're checking if there is room for another chip * the same size within the mapping. Therefore, * base + chipsize <= map->size is the correct thing to do, * because, base + chipsize would be the _first_ byte of the * next chip, not the one we're currently pondering. */ for (base = (1<<cfi.chipshift); base + (1<<cfi.chipshift) <= map->size; base += (1<<cfi.chipshift)) cp->probe_chip(map, base, &chip[0], &cfi); /* * Now allocate the space for the structures we need to return to * our caller, and copy the appropriate data into them. */ retcfi = mmalloc(sizeof(struct cfi_private) + cfi.numchips * sizeof(struct flchip)); if (!retcfi) { printk("%s: mmalloc failed for CFI private structure\n", map->name); mfree(cfi.cfiq); return NULL; } memcpy(retcfi, &cfi, sizeof(cfi)); memcpy(&retcfi->chips[0], chip, sizeof(struct flchip) * cfi.numchips); return retcfi;} static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp, struct cfi_private *cfi){ switch (map->buswidth) {#ifdef CFIDEV_BUSWIDTH_1 case CFIDEV_BUSWIDTH_1: cfi->interleave = CFIDEV_INTERLEAVE_1; cfi->device_type = CFI_DEVICETYPE_X8; if (cp->probe_chip(map, 0, NULL, cfi)) return 1; cfi->device_type = CFI_DEVICETYPE_X16; if (cp->probe_chip(map, 0, NULL, cfi)) return 1; break; #endif /* CFIDEV_BUSWITDH_1 */#ifdef CFIDEV_BUSWIDTH_2 case CFIDEV_BUSWIDTH_2:#ifdef CFIDEV_INTERLEAVE_1 cfi->interleave = CFIDEV_INTERLEAVE_1; cfi->device_type = CFI_DEVICETYPE_X16; if (cp->probe_chip(map, 0, NULL, cfi)) return 1;#endif /* CFIDEV_INTERLEAVE_1 */#ifdef CFIDEV_INTERLEAVE_2 cfi->interleave = CFIDEV_INTERLEAVE_2; cfi->device_type = CFI_DEVICETYPE_X8; if (cp->probe_chip(map, 0, NULL, cfi)) return 1; cfi->device_type = CFI_DEVICETYPE_X16; if (cp->probe_chip(map, 0, NULL, cfi)) return 1;#endif /* CFIDEV_INTERLEAVE_2 */ break; #endif /* CFIDEV_BUSWIDTH_2 */#ifdef CFIDEV_BUSWIDTH_4 case CFIDEV_BUSWIDTH_4:#if defined(CFIDEV_INTERLEAVE_1) && defined(SOMEONE_ACTUALLY_MAKES_THESE) cfi->interleave = CFIDEV_INTERLEAVE_1; cfi->device_type = CFI_DEVICETYPE_X32; if (cp->probe_chip(map, 0, NULL, cfi)) return 1;#endif /* CFIDEV_INTERLEAVE_1 */#ifdef CFIDEV_INTERLEAVE_2 cfi->interleave = CFIDEV_INTERLEAVE_2;#ifdef SOMEONE_ACTUALLY_MAKES_THESE cfi->device_type = CFI_DEVICETYPE_X32; if (cp->probe_chip(map, 0, NULL, cfi)) return 1;#endif cfi->device_type = CFI_DEVICETYPE_X16; if (cp->probe_chip(map, 0, NULL, cfi)) return 1; cfi->device_type = CFI_DEVICETYPE_X8; if (cp->probe_chip(map, 0, NULL, cfi)) return 1;#endif /* CFIDEV_INTERLEAVE_2 */#ifdef CFIDEV_INTERLEAVE_4 cfi->interleave = CFIDEV_INTERLEAVE_4;#ifdef SOMEONE_ACTUALLY_MAKES_THESE cfi->device_type = CFI_DEVICETYPE_X32; if (cp->probe_chip(map, 0, NULL, cfi)) return 1;#endif cfi->device_type = CFI_DEVICETYPE_X16; if (cp->probe_chip(map, 0, NULL, cfi)) return 1; cfi->device_type = CFI_DEVICETYPE_X8; if (cp->probe_chip(map, 0, NULL, cfi)) return 1;#endif /* CFIDEV_INTERLEAVE_4 */ break;#endif /* CFIDEV_BUSWIDTH_4 */ default: printk("genprobe_new_chip called with unsupported buswidth %d\n", map->buswidth); return 0; } return 0;}typedef struct mtd_info *cfi_cmdset_fn_t(struct map_info *, int);extern cfi_cmdset_fn_t cfi_cmdset_0001;extern cfi_cmdset_fn_t cfi_cmdset_0002;static inline struct mtd_info *cfi_cmdset_unknown(struct map_info *map, int primary){ struct cfi_private *cfi = map->fldrv_priv; __u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID; /* nothing to do */ printk("Support for command set %04X not present\n", type); return NULL;}static struct mtd_info *check_cmd_set(struct map_info *map, int primary){ struct cfi_private *cfi = map->fldrv_priv; __u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID; if (type == P_ID_NONE || type == P_ID_RESERVED) return NULL; switch(type){ /* Urgh. Ifdefs. The version with weak symbols was * _much_ nicer. Shame it didn't seem to work on * anything but x86, really. * But we can't rely in inter_module_get() because * that'd mean we depend on link order. */#ifdef CONFIG_MTD_CFI_INTELEXT case 0x0001: case 0x0003: return cfi_cmdset_0001(map, primary);#endif#ifdef CONFIG_MTD_CFI_AMDSTD case 0x0002: return cfi_cmdset_0002(map, primary);#endif } return cfi_cmdset_unknown(map, primary);}
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -