/**************************************** Copyright (c) **************************************************
**                               Guangzhou ZLG-MCU Development Co.,LTD.
**                                      graduate school
**                                 http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name:			D13HAL.c
** Last modified Date:	2004-12-10
** Last Version:		V1.0
** Descriptions:		USB驅動程序軟件包: ISP1181B(D13) 設備端驅動程序 ---- 描述符文件 
**						Soft Packet of USB Driver: the Driver of Device of ISP1181B(D13)
												   the Files of Descriptor
**------------------------------------------------------------------------------------------------------
** Created by:			
** Created date:		
** Version:				
** Descriptions:		
**
**------------------------------------------------------------------------------------------------------
** Modified by:			Ming Yuan Zheng
** Modified date:		2004-12-10
** Version:				V1.0
** Descriptions:		The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by: 
** Modified date:
** Version:	
** Descriptions: 
**
********************************************************************************************************/

#include "config.h"
#include "D13Config.h"
#include "Descriptor.h"

/* 設備描述符: 測試設備類型 */
#define USB_CLASS_CODE_TEST_CLASS_DEVICE                    0xdc

/* 接口描述符: 子類代碼 */
#define USB_SUBCLASS_CODE_TEST_CLASS_D13                    0xA0

/* 接口描述符: 協議代碼 */
#define USB_PROTOCOL_CODE_TEST_CLASS_D13                    0xB0

//設備描述符
const USB_DEVICE_DESCRIPTOR DeviceDescr =
{
	sizeof(USB_DEVICE_DESCRIPTOR),				//設備描述符長度,= 12H
	USB_DEVICE_DESCRIPTOR_TYPE,					//設備描述符類型,= 01H
	0x10,0x01,									//協議版本,= 1.10
	USB_CLASS_CODE_TEST_CLASS_DEVICE,			//測試設備類型, = 0DCH	
	0, 0,										//設備子類,設備協議
	EP0_PACKET_SIZE,							//端點0最大數據包大小,= 10H	
	0x71,0x04,									//PHILIPS公司的設備ID	
	0x68,0x01,									//設備制造商定的產品ID
	0x00,0x01,									//設備系列號
	0, 0, 0,									//索引
	1											//可能的配置數
};


const USB_DESCRIPTOR usb_descr =
{
//配置描述符
{
	sizeof(USB_CONFIGURATION_DESCRIPTOR),		//配置描述符長度,= 09H
	USB_CONFIGURATION_DESCRIPTOR_TYPE,			//配置描述符類型,= 02H
	CONFIG_DESCRIPTOR_LENGTH,0x00,				//描述符總長度, = 002EH
	1,											//只支持1個接口
	1,											//配置值
	0,											//字符串描述符指針(無)
	0x60,										//自供電,支持遠程喚醒
	0x32										//最大功耗(100mA)
},
//接口描述符
{
	sizeof(USB_INTERFACE_DESCRIPTOR),			//接口描述符長度,= 09H
	USB_INTERFACE_DESCRIPTOR_TYPE,				//接口描述符類型,= 04H
	0,											//接口數,只有1個
	0,											//可選配置,只有1個
	NUM_ENDPOINTS,								//除端點0的端點索引數目,= 04H
	USB_CLASS_CODE_TEST_CLASS_DEVICE,			//測試設備類型,= 0DCH
	USB_SUBCLASS_CODE_TEST_CLASS_D13,			//子類代碼,= 0A0H	
	USB_PROTOCOL_CODE_TEST_CLASS_D13,			//協議代碼,= 0B0H
	0											//字符串描述符索引
},
//端點描述符，端點1(輸入IN)
{
	sizeof(USB_ENDPOINT_DESCRIPTOR),			//端點描述符長度,= 07H
	USB_ENDPOINT_DESCRIPTOR_TYPE,				//端點描述符類型,= 05H
	0x81,										//端點1 IN
	USB_ENDPOINT_TYPE_INTERRUPT,				//中斷傳輸, = 03H
	EP1_TX_FIFO_SIZE,0x00,						//端點最大包的大小,= 0010H
	1											//傳輸間隔時間,= 1ms
},
//端點描述符，端點2(輸出OUT)
{
	sizeof(USB_ENDPOINT_DESCRIPTOR),			//端點描述符長度,= 07H
	USB_ENDPOINT_DESCRIPTOR_TYPE,				//端點描述符類型,= 05H
	0x02,										//端點2 OUT
	USB_ENDPOINT_TYPE_INTERRUPT,				//中斷傳輸,= 03H
	EP2_RX_FIFO_SIZE,0x00,						//端點最大包的大小,= 0010H
	1											//傳輸間隔時間,= 1ms
},
//端點描述符，端點3(輸入IN)
{
	sizeof(USB_ENDPOINT_DESCRIPTOR),			//端點描述符長度,= 07H
	USB_ENDPOINT_DESCRIPTOR_TYPE,				//端點描述符類型,= 05H
	0x83,										//端點3 IN
	USB_ENDPOINT_TYPE_BULK,						//批量傳輸,= 02H
	EP3_TX_FIFO_SIZE,0x00,						//端點最大包的大小,= 0040H
	10											//批量傳輸時該設備無效
},
//端點描述符，端點4(輸出OUT)
{
	sizeof(USB_ENDPOINT_DESCRIPTOR),			//端點描述符長度,= 07H
	USB_ENDPOINT_DESCRIPTOR_TYPE,				//端點描述符類型,= 05H
	0x04,										//端點4 OUT	
	USB_ENDPOINT_TYPE_BULK,						//批量傳輸,= 02H
	EP4_RX_FIFO_SIZE,0x00,						//端點最大包的大小,= 0040H
	10											//批量傳輸時該設備無效
},
//端點描述符，端點5(輸入IN)
{
	sizeof(USB_ENDPOINT_DESCRIPTOR),			//端點描述符長度,= 07H
	USB_ENDPOINT_DESCRIPTOR_TYPE,				//端點描述符類型,= 05H
	0x85,										//端點5 IN
	USB_ENDPOINT_TYPE_BULK,						//批量傳輸,= 02H
	EP5_TX_FIFO_SIZE,0x00,						//端點最大包的大小,= 0040H
	10											//批量傳輸時該設備無效
},
//端點描述符，端點6(輸出OUT)
{
	sizeof(USB_ENDPOINT_DESCRIPTOR),			//端點描述符長度,= 07H
	USB_ENDPOINT_DESCRIPTOR_TYPE,				//端點描述符類型,= 05H
	0x06,										//端點6 OUT	
	USB_ENDPOINT_TYPE_BULK,						//批量傳輸,= 02H
	EP6_RX_FIFO_SIZE,0x00,						//端點最大包的大小,= 0040H
	10											//批量傳輸時該設備無效
}
};