;---------------------------------------------------------------------
; defines
;---------------------------------------------------------------------
; flags definition
	flag1a		equ	1ah:byte; 00h-07h
	autosendf	equ	01h	; indicate the auto sending permit or not

	flag1b		equ	1bh:byte; 08h-0fh
	ui_data_ok	equ	08h	; if all voltage and current data is ready
	prt_data_ok	equ	09h	; if protect data ready
	angle_ok	equ	0ah	; if an angle meter finished
	savesetf	equ	0bh	; if save setting is doing
	brdcastf	equ	0dh	; for broadcast command
	yxchgf		equ	0eh	; yx change bit flag
	selferrorf	equ	0fh	; device check itself and find fault flag
		
	flag1c		equ	1ch:byte; 10h-17h
	minusf		equ	10h	; current saved sign flag, temporarily use
	tmpflag		equ	11h	; maybe some program need set some flag, use this!
	tmpflag1	equ	12h	; maybe some program need set some flag, use this!
	check_yxf	equ	13h	; time over, need judge yx again
	check_prtf	equ	14h	; time over, need judge protect status again
	sendf		equ	16h	; 485 or CAN communication sending
	lcdsndf		equ	17h	; if device is sending data to LCD

	flag1d		equ	1dh:byte; 18h-1fh
	judge_ykf	equ	18h	; count in soft timer interrupt for remote control flag
	avg_fpf_f	equ	19h	; 
	check_sucf	equ	1ah	; check the csboot0 or csboot1 data normal flag
	crcpassf	equ	1bh	; data from outcomm pass crc check flag
	saveflashf	equ	1ch	; save data from ram to csboot0 flag
	savecsbkf	equ	1dh	; save csboot1 from csboot0 flag
	flash_restoref	equ	1eh	; restore csboot0 from csboot1 flag
	cycle_savef	equ	1fh	; save energy per hour flag

	flag1e		equ	1eh:byte; 20h-27h
        applyaskf       equ     20h
	updateledf	equ	21h
	lcdmodif	equ	22h
	rec_readyf	equ	23h
	sendendf	equ	24h
	illegal_timef	equ	25h	; may difine as tempflag
	yc_forbidf	equ	26h	; yc dead zone is zero,then forbid yc autosending
	autosendycf	equ	27h	; yc judge autosend per second

	flag1f		equ	1fh:byte; 28h-2fh
	angle_flags	equ	flag1f:byte
	u_firstf	equ	28h
	i_ready		equ	29h
	u_judgef	equ	2ah
	i_judgef	equ	2bh
	u_avoidf	equ	2ch