#ifndef _CONFIG_H_#define _CONFIG_H_/* Section: Debugging *//* Debugging enabled */#define DEBUG 1/* Use assertions */#define USE_ASSERTIONS 1/* Section: Internal settings *//* Original file name */#define PKG_FILE_NAME "Template.lpj"/* Architecture */#define ARCH IP2K/* Package: ipEthMux - Ethernet-style muliplexer/demultiplexer */#define IPETHMUX 1/* Version */#define IPETHMUX_PKG_VERSION "${VERSION}"/* Enable runtime debugging *//* Enable 802.2 LLC frames *//* Support NAT and/or packet filters *//* Package: ipEthernet - Serializer Ethernet for IP2K */#define IPETHERNET 1/* Version */#define IPETHERNET_PKG_VERSION "${VERSION}"/* Ethernet Statistics *//* Pad TX Frame to Even Size *//* Flow control (half duplex) *//* Receive Offset */#define IPETHERNET_RECEIVE_OFFSET 0/* Reserved netpages */#define IPETHERNET_RESERVED_NETPAGE 0/* Multiple instances */#define IPETHERNET_MI_ENABLED 1/* eth0_Use Serializer 1 */#define eth0_USE_S1_FOR_ETHERNET 1/* eth0_Link LED */#define eth0__S1_IPETHERNET_LINK_LED 1/* eth0_Port */#define eth0__S1_IPETHERNET_LINK_LED_PORT RE/* eth0_Pin */#define eth0__S1_IPETHERNET_LINK_LED_PIN 1/* eth0_Active High */#define eth0__S1_IPETHERNET_LINK_LED_HIGH 1/* eth0_Activity LED */#define eth0__S1_IPETHERNET_ACTIVITY_LED 1/* eth0_Port */#define eth0__S1_IPETHERNET_ACTIVITY_LED_PORT RE/* eth0_Pin */#define eth0__S1_IPETHERNET_ACTIVITY_LED_PIN 0/* eth0_Active High */#define eth0__S1_IPETHERNET_ACTIVE_LED_HIGH 1/* eth0_Collision LED */#define eth0__S1_IPETHERNET_COLLISION_LED 1/* eth0_Port */#define eth0__S1_IPETHERNET_COLLISION_LED_PORT RE/* eth0_Pin */#define eth0__S1_IPETHERNET_COLLISION_LED_PIN 2/* eth0_Active High */#define eth0__S1_IPETHERNET_COLLISION_LED_HIGH 1/* eth0_Combo Activity/Link LED *//* eth0_Use Serializer 2 *//* Section: eth0_RX polarity setting *//* eth0_Normal RX polarity */#define eth0__ETH_RX_NORMAL_POLARITY 1/* eth0_Reversed RX polarity *//* eth0_Dynamic RX polarity *//* eth0_Rx address pointer */#define eth0_ETH_RX_ADDR_PTR 0/* eth0_Tx address pointer */#define eth0_ETH_TX_ADDR_PTR 1/* eth0_RX Netpages */#define eth0_IPETHERNET_RX_NETPAGES 8/* eth0_TX Buffered Frames */#define eth0_IPETHERNET_TX_FRAMES 2/* eth0_Timing Compensation */#define eth0_IPETHERNET_TIMING_COMP 1/* eth0_Timer 1 *//* eth0_Timer 2 */#define eth0_IPETHERNET_TIMING_COMP_USE_TIMER2 1/* Debug Message Printing *//* Package: ipHAL - ip2k */#define IPHAL 1/* Section: Package Options *//* Version */#define IPHAL_PKG_VERSION "${VERSION}"/* OSC1 frequency */#define OSC1_FREQ 4800000/* System clock frequency */#define SYSTEM_FREQ 120000000/* Serial PLL frequency */#define SERPLL_FREQ 240000000/* Initialize pram from filemedia *//* Upgrade Support *//* ADC *//* Latch */#define USE_LATCH 1/* D to Q Propagation Time [ns] */#define LATCH_PROPAGATION_TIME_NS 15/* LE Setup Time [ns] */#define LATCH_SETUP_TIME_NS 6/* LE Hold Time [ns] */#define LATCH_HOLD_TIME_NS 1/* Data Port */#define LATCH_DATA_PORT RD/* LE Port */#define LATCH_LE_PORT RB/* LE Pin */#define LATCH_LE_PIN 6/* External SRAM */#define USE_EXTMEM 1/* Access Time [ns] */#define EXTMEM_ACCESS_NS 25/* Bus release Time [ns] */#define EXTMEM_BUS_RELEASE_NS 7/* CS Port */#define EMCS_PORT RB/* CS Pin */#define EMCS_PIN 3/* Watchdog *//* Section: OS Timer *//* RTTMR *//* TMR1 */#define USE_TMR1_FOR_OSTIMER 1/* TMR2 *//* Tick rate */#define TICK_RATE 1000/* Section: Netpages *//* Use internal PRAM for netpages */#define USE_PRAM_FOR_NETPAGES 1/* Use external SRAM for netpages *//* CRC32 LFSR Block */#define APP_LFSR_CRC32 3/* Section: Debugging *//* Use debug LEDs */#define USE_DEBUG_LEDS 1/* Debug lights port */#define DEBUG_LIGHTS_PORT RB/* Use debug serial interface *//* Break on NULL callback */#define DEBUG_BREAK_AT_ZERO 1/* Break if main returns */#define DEBUG_BREAK_IF_MAIN_RETURNS 1/* Enable debug time headers *//* Architecture Extension */#define IP2022 1/* Enable runtime debugging *//* ISR */#define IPHAL_ISR_CODE 1/* TMR0 */#define IPHAL_ISR_TMR0_ENABLED 1/* Interrupt frequency */#define TMR0_INT_FREQ 460800/* Prescale */#define TMR0_PRESCALE 2/* ISR Cycle Count *//* DSR *//* ip2kvm support *//* Package: ipLibC - Standard C library */#define IPLIBC 1/* Version */#define IPLIBC_PKG_VERSION "${VERSION}"/* Package: ipOS - Operating System */#define IPOS 1/* Section: Package Options *//* Version */#define IPOS_PKG_VERSION "${VERSION}"/* Section: Memory (heap) *//* Default stack size */#define DEFAULT_STACK_SIZE 0x280/* Best-fit algorithm */#define IPOS_HEAP_BEST_FIT 1/* First-fit algorithm *//* Enable heap debugging. */#define HEAP_DEBUG 1/* Paint block when allocated */#define IPOS_HEAP_PAINT_BLOCK_ON_ALLOC 1/* Clear block when freed */#define IPOS_HEAP_CLEAR_BLOCK_ON_FREE 1/* Guard band size */#define IPOS_HEAP_GUARD_BAND_SIZE 2/* Section: Netbufs *//* Enable netpage debugging *//* Enable netbuf debugging */#define NETBUF_DEBUG 1/* Enable netbuf exceptions *//* Accelerate core netpage functions */#define NETPAGE_ACCELERATED_FUNCTIONS 1/* Accelerate core netbuf functions */#define NETBUF_ACCELERATED_FUNCTIONS 1/* Maximum number of netpages per netbuf */#define NETBUF_PAGES 8/* Allow sequential pages *//* Dynamically linked libraries *//* Enable runtime debugging */#define IPOS_DEBUG 1/* Section: Oneshot Timers *//* Enable oneshot debugging *//* Package: ipStack - TCP/IP Core */#define IPSTACK 1/* Version */#define IPSTACK_PKG_VERSION "${VERSION}"/* Enable runtime debugging */#define IPSTACK_DEBUG 1/* Section: Internet Protocol (IP) *//* Enable IP routing *//* Enable IP runtime debugging *//* Accelerate IP routing *//* Enable datagram reassembly *//* Enable extended route information *//* Section: Internet Control Message Protocol (ICMP) *//* Propagate ICMP messages */#define ICMP_PROPAGATE_ICMP 1/* Transmission Control Protocol (TCP) */#define TCP_ENABLED 1/* Enable TCP runtime debugging *//* TCP close timeout */#define TCP_CLOSE_TIMEOUT 60/* Send RST for connection to unused port *//* Allow 4-way handshake for connection *//* Propagate ICMP messages */#define TCP_PROPAGATE_ICMP 1/* Machine Space */#define IPSTACK_TCP_MACHINE_SPACE NATIVE/* Send keep-alive segments *//* Retransmission timeout *//* User Datagram Protocol (UDP) */#define UDP_ENABLED 1/* Enable UDP runtime debugging *//* Compute UDP Checksum */#define UDP_COMPUTE_CHECKSUM 1/* Propagate ICMP messages */#define UDP_PROPAGATE_ICMP 1/* Machine Space */#define IPSTACK_UDP_MACHINE_SPACE NATIVE/* Enable VM clients */#define IPSTACK_UDP_VM_CLIENTS 1/* Enable fast IP checksumming */#define IP_FAST_CSUM 1/* Default gateway */#define DEFAULT_GW_ENABLED 1/* Default gateway address */#define DEFAULT_GW_ADDR 0x0A010101/* Section: IP Datalink Layers *//* Serial Link Interface Protocol (SLIP) *//* Ethernet link layer enabled */#define ETHERNET_ENABLED 1/* Local IP address */#define ETH_LOCAL_IP_ADDRESS 0xC0A801c9/* Local IP subnet mask */#define ETH_LOCAL_IP_SUBNET 0xFFFFFF00/* ARP cache entry lifetime */#define ARP_CACHE_ENTRY_LIFETIME 60/* Support runtime statistics *//* Package: ipTime - Time of Day Support */#define IPTIME 1/* Version */#define IPTIME_PKG_VERSION "${VERSION}"/* Enable Runtime Debugging */#define IPTIME_DEBUG 1/* Simple Network Time Protocol (SNTP) */#define SNTP_ENABLED 1/* Server IP Address */#define SNTP_SERVER_IP_ADDRESS 0xc0a80190/* Timer server protocol version */#define SNTP_SERVER_VERSION 4/* Timeout */#define SNTP_TIMEOUT 3/* Package: ipUART - Serial UARTs */#define IPUART 1/* Version */#define IPUART_PKG_VERSION "${VERSION}"/* Software VP */#define UART_VP_ENABLED 1/* echo_Baud Rate */#define echo_UART_VP_BAUDRATE 115200/* echo_Enable hardware handshaking */#define echo_UART_VP_USE_HS 1/* Section: echo_Transmit *//* echo_TX handshaking invert *//* echo_TX handshaking pin */#define echo_UART_VP_TX_HS_PIN 2/* echo_TX handshaking port */#define echo_UART_VP_TX_HS_PORT RC/* Section: echo_Receive *//* echo_Handshaking low water mark */#define echo_UART_VP_LOW_WATER 16/* echo_RX handshaking invert *//* echo_RX handshaking pin */#define echo_UART_VP_RX_HS_PIN 1/* echo_RX handshaking port */#define echo_UART_VP_RX_HS_PORT RC/* echo_TX FIFO size */#define echo_UART_VP_TX_FIFO_SIZE 128/* echo_TX port */#define echo_UART_VP_TX_PORT RF/* echo_TX pin */#define echo_UART_VP_TX_PIN 1/* echo_RX FIFO Size */#define echo_UART_VP_RX_FIFO_SIZE 128/* echo_RX port */#define echo_UART_VP_RX_PORT RF/* echo_RX pin */#define echo_UART_VP_RX_PIN 7/* echo_Enable DCD input *//* Enable Runtime Debugging */#endif /* _CONFIG_H_ */