" ON"           note:  format: "string", you can modify string between start delimit(") and end delimit(")
"YES"
"OFF"
" : XOFF( 0 to 255 )  XON( 0 to 255 ) or leave empty."
" : 0 to 255."
" : foreground( 0 to 15 )  background( 0 to 7 )."
" : ON( = YES )  or   others( = NO )."
" : unit is 1/18.2 second delay per character send."
" : timeout in seconds."
" : filename for character translation table."
" : look_char skip_# loop[store_str] loop[send_str] skip_#"
" : look_char  skip_#  loop[send_str]  wait_char  skip_#"
" ( port on local computer ) : 0 to 16 and installed"
" rate : 110, 300, 600, 1200, 2400, 4800 or 9600 only."
" : (E)ven, (O)dd, or (N)one only."
" bits : 7 or 8 only."
" bits : 1 or 2 only."
" value : 0 to 255  or  leave empty."
" ( on switch box ) : -1 to 9 ( -1 = no box port )."
" ( screen line number ) : 0 to 20 ( 0 = no split ).",
" : Binary or Ascii( not used with Xmodem )"
" : number of hex characters per line ( 1 to 26 )."
"( receive loopback to send ) : ON(= YES ) or others(= NO )."
"Even"
"Ascii"
"Please enter a configuration file name!"
"File name ( ENTER to exit program ) : "
"File does NOT exist, Please enter again!"
"Undefined command : @%s, ( ALT-X to exit program, SPACE to ignore it ) : "
"COM%d Unavailable and error status=%d"
"Press ALT-X to exit program or SPACE to accept the value(= %s %s ) ? "
"Tranlate table file"
"can't been open, please correct it!"
"ERROR!  "
"ERROR! Try again! "
"DOS command ENDs, Please press any key to return! "
"Failure! back to DOS command or configuration screen ( type d or c )? "
" Wait for char '%s' received or type ALT-X to ignore it? "
"Hard"
"Soft"
"TxFile"
"RxFile"
"bytes"
"COM%d %4d,%c,%d,%d"
"                           Comm Menu"
"   F1 - Help"
" PgDn - Edit Configuration"
"ALT-B - Send a Break"
"ALT-C - Clear Display"
"ALT-D - Execute DOS command"
"ALT-X - Exit Comm mode"
"ALT-R - Receive a file"
"ALT-S - Send a file"
"ALT-I - Toggle Rx Input  Display   "
"ALT-O - Toggle Tx Output Display   "
"ALT-H - Toggle Hex Mode            "
"ALT-K - Toggle keyboard lock       "
"ALT-P - Toggle Echo to printer     "
"ALT-A - Toggle Ascii file mode     "
"ALT-M - Toggle Xmodem mode         "
"                           Send Menu"
" PgDn - Show Configuration"
"ALT-S - Hold Sending"
"ALT-X - Exit Send mode"
"                           Receive Menu"
"ALT-R - Hold receive"
"ALT-X - Exit receive mode"
"BCDXRSIOHKPAM"    note: refer to the above ALT-B, ALTC, ALT-D, ALTX, ALT-R, ....
"NOEE"             note: parity none, parity odd, parity even, parity default(even)
"ABA"              note: ascii file, binary file, default file type(ascii)
"era"              note: if receive file exist, e:enter again or r:replace it or a:append it
"dc"               note: if set switch box has error, d:back to DOS or C:back to Configuration screen
"comm.msg"         note: default name for this file
".cfg"             note: default entension of configuration file
" %02d:%02d:%02d"
" F1 for Help, ALT-R to Receive, ALT-S to Send, ALT-X to exit Comm "
" F1 for Help, ALT-S to Hold, ALT-X to abort Send "
" F1 for Help, ALT-R to Hold, ALT-X to abort Receive "
" doesn't exist, Enter again! "
" File to Send ( ENTER to abort ) : "
" File to Receive ( ENTER to abort ) : "
" File exists! ( Enter name again, Append, Replace? ) : "
" can't been open, Enter again! "
" Error writing to Send buffer! ( ALT-S to resume, ALT-X to exit ) : "
" Error reading from receive buffer! (ALT-R to resume, ALT-X to exit) "
" Receive timeout! ( ALT-R to resume, ALT-X to exit Receive ) : "
" Send timeout! ( ALT-S to resume, ALT-X to exit Send ) : "
" ALT-S to resume, ALT-X to exit send "
" ALT-R to resume, ALT-X to exit Receive "
" Receive buffer overrun! (ALT-R to ignore, ALT-X to exit Receive) : "
" ALT-S to Save, Cursor keys to Move, ALT-X to exit Configuation "
" File to Save ( ENTER to abort ) : "
" Type DOS command >"
" Send completed! please press any key to return! "
" File to Receive via Xmodem( ENTER to abort): "
" File to Send via Xmodem( ENTER to abort): "
" Press Esc to abort Send ",
" Press Esc to abort Receive ",
" Receive completed! please press any key to return! "
" Please press any key to exit! "
"Configuration File:                                                           "  note: 1. String length is fixed
""                                                                                      2. You can't insert or delete character
"Port:            Stabs:         SSoft:            SDisp:        SColor:       "        3. You can only replace letter
"Baud:            Rtabs:         RSoft:            RDisp:        RColor:       "           ex:COMM:            STABS:         SOFT :
"DataBit:         Dtabs:         STime:            KLock:        KColor:       "  note: the same as above
"StopBit:         Hard:          RTime:            Hex:          Suppress:     "  note: the same as above
"Parity:          Soft:          Throttle:         Xmodem:       Files:        "  note: the same as above
"Com:             Split:         HEXLen:           Echo:                       "  note: the same as above
"Dtable:                                                                       "  note: the same as above
"RECEIVE:                                                                      "  note: the same as above
"R1:                                                                           "  note: the same as above
"R2:                                                                           "  note: the same as above
"R3:                                                                           "  note: the same as above
"RS:                                                                           "  note: the same as above
"RE:                                                                           "  note: the same as above
"SENDING:                                                                      "  note: the same as above
"S1:                                                                           "  note: the same as above
"S2:                                                                           "  note: the same as above
"S3:                                                                           "  note: the same as above
"SS:                                                                           "  note: the same as above
"SE:                                                                           "  note: the same as above
"@CO"        note: command  @Com  and  abbreviated command should be unigue in the parsing
"@BA"        note: command  @Baud
"@PA"        note: command  @Par
"@DA"        note: command  @Data
"@STO"       note: command  @Stop
"@SSO"       note: command  @SSoft
"@RSO"       note: command  @RSoft
"@SC"        note: command  @SColor
"@RC"        note: command  @RColor
"@KC"        note: command  @KColor
"@HA"        note: command  @Hard
"@SO"        note: command  @Soft
"@SD"        note: command  @SDisp
"@RD"        note: command  @RDisp
"@HE"        note: command  @Hex
"@KL"        note: command  @kLock
"@STI"       note: command  @STime
"@RTI"       note: command  @RTime
"@DTABS"     note: command  @DTabs
"@STABS"     note: command  @STabs
"@RTABS"     note: command  @RTabs
"@DTABL"     note: command  @DTable
"@STABL"     note: command  @STable
"@RTABL"     note: command  @RTable
"@SU"        note: command  @Suppress
"@PO"        note: command  @Port
"@TH"        note: command  @Throttle
"@R1"        note: command  @R1Char
"@R2"        note: command  @R2Char
"@R3"        note: command  @R3Char
"@RST"       note: command  @RStart
"@RE"        note: command  @REnd
"@S1"        note: command  @S1Char
"@S2"        note: command  @S2Char
"@S3"        note: command  @S3Char
"@SST"       note: command  @SStart
"@SE"        note: command  @SEnd
"@XM"        note: command  @Xmodem
"@SP"        note: command  @Split
"@FI"        note: command  @File
"@HEXL"      note: command  @HEXL
"@EC"        note: command  @Echo
"\SetSwitch.lst"
"Please turn switch box off/on, then press any key to try again!"
"Box port out of range!"
"Timeout! No response on port check!"
"Box port can't be changed or no response on port change!"
"Box port parameters error or no response on port setting!"
"Com error!"
"Com receive timeout!"
"ACK CODE is not 'U'!"
"XMODEM Download - File %s open( %ld bytes), ready to receive"
"XMODEM - Error writing to file %s"
"XMODEM - Block %d rec'd and %ld bytes stored in file %s"
"XMODEM ERROR -- Receive buffer overflow!"
"XMODEM ERROR - First character not SOH or EOT"
"XMODEM ERROR - Short block %d"
"XMODEM ERROR - Incorrect block number"
"XMODEM ERROR - Checksum"
"XMODEM ERROR - Receive timeout"
"XMODEM Download Complete - Rec'd %d blocks( %ld bytes) to %s"
"XMODEM ERROR - Closing file %s"
"XMODEM Upload - File %s open( %d blocks), ready to send"
"XMODEM - Block %d sent and %ld bytes remain in file %s"
"XMODEM -- Port invalid, not setup or wrong parameter"
"XMODEM OK"
"XMODEM ERROR - Send error"
"XMODEM ERROR - Send timeout"
"XMODEM ERROR - No ACK from remote station after 10 retries"
"XMODEM ERROR (unspecified)"
"XMODEM ERROR -- Transmit Buffer Overflow !"
"XMODEM Upload Complete - Sent %d blocks( %ld bytes) from %s"
"SWITCH"
"KEY"
"Key not detected. Press space bar to continue."
  1016 760 0 0 0 0 0 0 0  0  0	0  0  0  0   760     note:  BASE I/O ADDRESSES FOR 8250 DEVICES
     4	 3 0 0 0 0 0 0 0  0  0	0  0  0  0     4     note:  IRQ (INTERRUPT REQUEST) NUMBERS
    12	11 0 0 0 0 0 0 0  0  0	0  0  0  0    12     note:  INTERRUPT NUMBERS for all ports
    32	32 0 0 0 0 0 0 0  0  0	0  0  0  0    32     note:  I/O ADDRESSES OF 8259A INTERRUPT CONTROLLER
*Com 1	 2 3 4 5 6 7 8 9 10 11 12 13 14 15    16