/* *  drivers/mtd/nand/spia.c * *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * * *	10-29-2001 TG	change to support hardwarespecific access *			to controllines	(due to change in nand.c) *			page_cache added * * $Id: spia.c,v 1.25 2005/11/07 11:14:31 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * *  Overview: *   This is a device driver for the NAND flash device found on the *   SPIA board which utilizes the Toshiba TC58V64AFT part. This is *   a 64Mibit (8MiB x 8 bits) NAND flash device. */#include <linux/kernel.h>#include <linux/init.h>#include <linux/slab.h>#include <linux/module.h>#include <linux/mtd/mtd.h>#include <linux/mtd/nand.h>#include <linux/mtd/partitions.h>#include <asm/io.h>/* * MTD structure for SPIA board */static struct mtd_info *spia_mtd = NULL;/* * Values specific to the SPIA board (used with EP7212 processor) */#define SPIA_IO_BASE	0xd0000000	/* Start of EP7212 IO address space */#define SPIA_FIO_BASE	0xf0000000	/* Address where flash is mapped */#define SPIA_PEDR	0x0080		/*					 * IO offset to Port E data register					 * where the CLE, ALE and NCE pins					 * are wired to.					 */#define SPIA_PEDDR	0x00c0		/*					 * IO offset to Port E data direction					 * register so we can control the IO					 * lines.					 *//* * Module stuff */static int spia_io_base = SPIA_IO_BASE;static int spia_fio_base = SPIA_FIO_BASE;static int spia_pedr = SPIA_PEDR;static int spia_peddr = SPIA_PEDDR;module_param(spia_io_base, int, 0);module_param(spia_fio_base, int, 0);module_param(spia_pedr, int, 0);module_param(spia_peddr, int, 0);/* * Define partitions for flash device */const static struct mtd_partition partition_info[] = {	{		.name	= "SPIA flash partition 1",		.offset	= 0,		.size	= 2*1024*1024	},	{		.name	= "SPIA flash partition 2",		.offset	= 2*1024*1024,		.size	= 6*1024*1024	}};#define NUM_PARTITIONS 2/* *	hardware specific access to control-lines*/static void spia_hwcontrol(struct mtd_info *mtd, int cmd){    switch(cmd){	case NAND_CTL_SETCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |=  0x01; break;	case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x01; break;	case NAND_CTL_SETALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |=  0x02; break;	case NAND_CTL_CLRALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x02; break;	case NAND_CTL_SETNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x04; break;	case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |=  0x04; break;    }}/* * Main initialization routine */int __init spia_init (void){	struct nand_chip *this;	/* Allocate memory for MTD device structure and private data */	spia_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),				GFP_KERNEL);	if (!spia_mtd) {		printk ("Unable to allocate SPIA NAND MTD device structure.\n");		return -ENOMEM;	}	/* Get pointer to private data */	this = (struct nand_chip *) (&spia_mtd[1]);	/* Initialize structures */	memset((char *) spia_mtd, 0, sizeof(struct mtd_info));	memset((char *) this, 0, sizeof(struct nand_chip));	/* Link the private data with the MTD structure */	spia_mtd->priv = this;	/*	 * Set GPIO Port E control register so that the pins are configured	 * to be outputs for controlling the NAND flash.	 */	(*(volatile unsigned char *) (spia_io_base + spia_peddr)) = 0x07;	/* Set address of NAND IO lines */	this->IO_ADDR_R = (void __iomem *) spia_fio_base;	this->IO_ADDR_W = (void __iomem *) spia_fio_base;	/* Set address of hardware control function */	this->hwcontrol = spia_hwcontrol;	/* 15 us command delay time */	this->chip_delay = 15;	/* Scan to find existence of the device */	if (nand_scan (spia_mtd, 1)) {		kfree (spia_mtd);		return -ENXIO;	}	/* Register the partitions */	add_mtd_partitions(spia_mtd, partition_info, NUM_PARTITIONS);	/* Return happy */	return 0;}module_init(spia_init);/* * Clean up routine */#ifdef MODULEstatic void __exit spia_cleanup (void){	/* Release resources, unregister device */	nand_release (spia_mtd);	/* Free the MTD device structure */	kfree (spia_mtd);}module_exit(spia_cleanup);#endifMODULE_LICENSE("GPL");MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com");MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on SPIA board");