# LIC: GPLChanges from Version 3.6 to 3.7:- Fixed typo in the firewall-standalone sample firewall script.  Fix courtesy of Robert Vogelgesang <vogel@users.sourceforge.net>- Added -O option to pppoe-server to let you specify a different default  options file for pppd instead of /etc/ppp/pppoe-server-options  Feature courtesy of Robert Vogelgesang <vogel@users.sourceforge.net>- Fixed some silliness and incorrectness in configure.in.  Feature courtesy of Robert Vogelgesang <vogel@users.sourceforge.net>- Fixed a typo in pppoe-connect.in that made it fail if used with the  kernel-mode plugin.- Make pppoe-server prepend "nic-" to interface name if used with  kernel-mode plugin.  This lets you use interfaces that don't start  with "eth" more easily.Changes from Version 3.5 to 3.6:- Changed the names of commands from adsl-* to pppoe-* to more logically  name the scripts.  NOTE INCOMPATIBILITY:  OLD NAME                   NEW NAME  adsl-start                 pppoe-start  adsl-stop                  pppoe-stop  adsl-status                pppoe-status  adsl-connect               pppoe-connect  adsl-setup                 pppoe-setup- Changed sample firewall scripts to use iptables instead of the old ipchains  command.- Updated KERNEL-MODE-PPPOE instructions to reflect more modern pppd that  is commonly distributed.- Make the userland pppoe daemon run as "nobody" if possible, once session  has started.- Make userland pppoe program somewhat safe if it is installed SUID or  SGID.  Note that I still do *NOT* recommend a SUID/SGID pppoe.- Fix long-standing bug in pppoe-server that passed arguments to pppd in the  wrong order.- Fix kernel-mode plugin.  It was broken by changes to pppd.  The pppd  maintainers fixed their version of the plugin, but neglected to inform me.  Thanks a lot, guys!- Make plugin accept argument of the form "nix-XXXX" to force it to use  device "XXXX" as the Ethernet interface.  This allows the use of devices  whose names do not start with "eth"Changes from Version 3.4 to 3.5:- Fixes for compilation on Solaris.Changes from Version 3.3 to 3.4:- INCOMPATIBILITY WITH EARLIER VERSIONS:  Kernel-mode plugin now is built against latest CVS ppp source rather than  Michal Ostrowski's patched version.  If you use kernel-mode PPPoE, you  MUST use the CVS version of the ppp source code with rp-pppoe 3.4.- Print PPPoE session number when connection terminates.  Thanks to  Alexander Dalloz for suggesting this.- Fixed a bug in MSS clamping -- it now works with protocol-field compression.  Thanks to Gerd v. Egidy for the patch.- Ignore SIGINT and SIGTERM so LCP termination packets make it out.Changes from Version 3.2 to 3.3:- Client works on Solaris again.  It was broken in 3.2.- Added DEFAULTROUTE=yes|no option to configuration file.- Server parses address pool file better.- Server address pool allows ranges of addresses on a line: a.b.c.d-e- Added "-d" (=debug) and "-P" (=check pool file syntax) options to  pppoe-server.Changes from Version 3.1 to 3.2:- Client now ignores PADT's if they are from the wrong source MAC address  or to the wrong destination MAC address.- Minor fixes to Makefile.in for Turbolinux.Changes from Version 3.0 to 3.1:- Improved KERNEL-MODE-PPPOE instructions- Works with patched pppd 2.4.1- Many improvements to server:  Added "-u" and "-r" options; server can  now respond to request on multiple Ethernet interfaces.- SECURITY BUG FIX: Server now ignores PADT's if they are from the wrong  source MAC address.  You are STRONGLY RECOMMENDED to upgrade to 3.1  if you use pppoe-server in production.Changes from Version 2.8 to 3.0:- Many small improvements to server.  Server now only makes one  discovery socket, systemwide, with addition of "-n" option to pppoe.- Fixes for compilation problems on BSD, Solaris and some Linux platforms.- Added "-p" option to pppoe-server to allow you to specify a pool of  IP addresses to assign to clients.- Added GUI system (tkpppoe).  This work was funded by Iospan  Wireless, Inc.  The GUI includes a Set-UID wrapper (pppoe-wrapper)  which allows ordinary users to control a link (if so authorized.)  I believe the wrapper script is secure, but please audit the  source code (gui/wrapper.c) if you have any concerns.- Changes to scripts and pppoe.conf.  DNS setup is now dynamic (happens  each time adsl-connect runs.)- Made relay.c check packet lengths rigorously; made it throw out Ethernet  frame padding on session packets as well as discovery packets.Changes from Version 2.7 to 2.8:- Added init scripts for TurboLinux, courtesy of Yasuhiro Sumi.- Made relay.c check packet lengths rigorously; made it throw out Ethernet  frame padding on discovery packets.*** NOTE: 2.7 was not released publiclyChanges from Version 2.6 to 2.7:- Completely restructured source file tree.- Much internal restructuring to eliminate a bunch of global variables.- adsl-connect now executes /etc/ppp/adsl-lost whenever connection is dropped  or cannot be established.- Split pppoe.c into pppoe.c and discovery.c.- Added relay agent (pppoe-relay).- Made adsl-connect script use the "-U" (host-unique) option to better support  multiple PPPoE links.- Added support for kernel-mode PPPoE (EXPERIMENTAL, UNSUPPORTED!)- Added "-o" option to PPPoE server; encoded server PID in pppoe-server  cookie.Changes from Version 2.5 to 2.6:- Code should now compile cleanly on Caldera and Slackware Linux- Fixed rp-pppoe.spec file to work on Mandrake and Red Hat.- Deleted some obsolete files- Fixed bug in Solaris/x86 port (thanks to Philippe Levan)- Made shell scripts nicer under Solaris (again, Philippe Levan)- Made adsl-status look under /var/run and /etc/ppp for PID files.  Should  fix problems with NetBSD.- Added PPPD_EXTRA to pppoe.conf; made the PID file depend on the config  file name.  This makes it easier to run multiple PPPoE sessions.Changes from Version 2.4 to 2.5:- Tested for zero-length TCP option-length field, and for reverse-packing  of type/code bitfields.  Thanks to Robert Schlabbach for pointing out  these problems.- Set umask to 077 in adsl-setup.in to protect created files like  /etc/ppp/pap-secrets.Changes from Version 2.3 to 2.4:- Fixed spec file to automatically add .gz extension to man files as required- Tightened firewall rules.- Better check for /var/run in adsl-status; minor shell script fixes and  cleanups for NetBSD and Solaris.- Added FAQ to HOW-TO-CONNECT regarding running a script each time a  connection is made.Changes from Version 2.2 to 2.3:- Fixed the init script to create/remove /var/lock/subsys/adsl (patch  courtesy of Charley Carter.)- Added support (under Linux) for N_HDLC line discipline which should  greatly reduce CPU usage.  My tests show it cuts CPU usage in half.  My 486 DX2/66 gets 800 kb/s at 22% CPU usage.- adsl-connect uses "setsid" (if available) so that adsl-stop doesn't kill  its caller.  There is (IMO) a bug in pppd which kills all processes in  its process group if the "pty" option is used.  The setsid program gets  around this bug, on Linux at least.- Port to Solaris, courtesy of David Holland.- Renamed spec file from "spec" to "rp-pppoe.spec" and made some cleanups.  NOTE: Red Hat, in their infinite wisdom, decided to make the new RPM  compress man pages automatically.  You may have problems building RPM's  from source unless you get the latest rpm package and make sure it  compresses man pages.Changes from Version 2.1 to 2.2:- Added "-f" option to pppoe to allow use of any Ethernet frame type  for PPPoE.  USE WITH CAUTION -- this is a workaround for broken DSL  providers, not something you should monkey with freely!- Added pppoe-sniff program to help expose non-standard PPPoE implementations.Changes from Version 2.0 to 2.1:- Fixed minor bugs in bounds-checking- Modified adsl-status to use output of "netstat -r -n" to determine whether  or not link is up.  This should make it independent of locale, I hope!- Added "-k" and "-d" options to pppoe.Changes from Version 1.9 to 2.0:- Addition of pppoe-server- Massive internal code restructuring- Zealous bounds-checking everywhere.- adsl-setup now quotes user name and password in /etc/ppp/pap-secrets.- Ported to OpenBSD, FreeBSD and NetBSD, courtesy of Geoff Mottram  and Yannis Sismanis.- Rearranged adsl-* shell scripts, courtesy of Heiko Schlittermann.- Fixed bug in which Host-Uniq did not work if access concentrator sent  a cookie.- Addition of SuSE-specific "init" script, courtesy of Gary Cameron.Changes from Version 1.8 to 1.9:- Added some more documentation to HOW-TO-CONNECT- Demand-dialling option now works correctly- SIGHUP terminates pppoe after sending a PADT to the access concentrator- Minor cleanups to connection shell scriptsChanges from Version 1.7 to 1.8:- Added demand-dialling option- Clarified HOW-TO-CONNECT- Added adsl-status script- Added "restart" and "status" options to Red Hat /etc/rc.d/init.d/adsl script- Made adsl-setup check for existence of pppd- Wildcarded external interface in firewall rules- Made pppoe send a PADT frame if connection is terminated$Id: CHANGES,v 1.24 2005/11/17 02:10:28 dfs Exp $